From: "Heiko Stübner" <heiko@sntech.de>
To: Linus Walleij <linusw@kernel.org>, Simon Glass <sjg@chromium.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>,
Rob Herring <robh@kernel.org>,
devicetree@vger.kernel.org, Jonas Karlman <jonas@kwiboo.se>,
linux-gpio@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Conor Dooley <conor+dt@kernel.org>,
linux-rockchip@lists.infradead.org,
Simon Glass <sjg@chromium.org>,
Jeffy Chen <jeffy.chen@rock-chips.com>,
Ye Zhang <ye.zhang@rock-chips.com>, huang lin <hl@rock-chips.com>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 1/4] pinctrl: rockchip: Decode drive strength in the get function
Date: Sun, 09 Aug 2026 11:39:33 +0200 [thread overview]
Message-ID: <8942531.Sb9uPGUboI@diego> (raw)
In-Reply-To: <20260729132736.3807082-2-sjg@chromium.org>
Am Mittwoch, 29. Juli 2026, 15:27:25 Mitteleuropäische Sommerzeit schrieb Simon Glass:
> The decoding of the 2-bit and 8-bit level drive-strength values sits in
> rockchip_set_drive_perpin(), where it is unreachable: the SoCs whose
> banks declare these drive types (RK3506 and RV1103B) take the early
> ctrl->type branch in the set path, and the read-and-decode logic in a
> set function has no purpose. Meanwhile rockchip_get_drive_perpin()
> lacks the decoding, so pin_config_get() and the debugfs output report
> -EINVAL for these SoCs.
>
> Move the two cases to rockchip_get_drive_perpin(), where they belong.
>
> Fixes: dbd2317d7b9f ("pinctrl: rockchip: Add rk3506 pinctrl support")
> Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
> ---
>
> Changes in v3:
> - Add new patch moving the drive-strength decoding to the get function
>
> drivers/pinctrl/pinctrl-rockchip.c | 38 +++++++++++++++---------------
> 1 file changed, 19 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
> index 7e0fcd45fd26..08a46a04a815 100644
> --- a/drivers/pinctrl/pinctrl-rockchip.c
> +++ b/drivers/pinctrl/pinctrl-rockchip.c
> @@ -3267,6 +3267,25 @@ static int rockchip_get_drive_perpin(struct rockchip_pin_bank *bank,
> case DRV_TYPE_IO_1V8_ONLY:
> rmask_bits = RK3288_DRV_BITS_PER_PIN;
> break;
> + case DRV_TYPE_IO_LEVEL_2_BIT:
> + ret = regmap_read(regmap, reg, &data);
> + if (ret)
> + return ret;
> + data >>= bit;
> +
> + return data & 0x3;
> + case DRV_TYPE_IO_LEVEL_8_BIT:
> + ret = regmap_read(regmap, reg, &data);
> + if (ret)
> + return ret;
> + data >>= bit;
> + data &= (1 << 8) - 1;
> +
> + ret = hweight8(data);
> + if (ret > 0)
> + return ret - 1;
> + else
> + return -EINVAL;
> default:
> dev_err(dev, "unsupported pinctrl drive type: %d\n", drv_type);
> return -EINVAL;
> @@ -3390,25 +3409,6 @@ static int rockchip_set_drive_perpin(struct rockchip_pin_bank *bank,
> case DRV_TYPE_IO_1V8_ONLY:
> rmask_bits = RK3288_DRV_BITS_PER_PIN;
> break;
> - case DRV_TYPE_IO_LEVEL_2_BIT:
> - ret = regmap_read(regmap, reg, &data);
> - if (ret)
> - return ret;
> - data >>= bit;
> -
> - return data & 0x3;
> - case DRV_TYPE_IO_LEVEL_8_BIT:
> - ret = regmap_read(regmap, reg, &data);
> - if (ret)
> - return ret;
> - data >>= bit;
> - data &= (1 << 8) - 1;
> -
> - ret = hweight8(data);
> - if (ret > 0)
> - return ret - 1;
> - else
> - return -EINVAL;
> default:
> dev_err(dev, "unsupported pinctrl drive type: %d\n", drv_type);
> return -EINVAL;
>
next prev parent reply other threads:[~2026-08-09 9:39 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-29 13:27 [PATCH v3 0/4] pinctrl: Add support for the Rockchip RV1106 Simon Glass
2026-07-29 13:27 ` [PATCH v3 1/4] pinctrl: rockchip: Decode drive strength in the get function Simon Glass
2026-08-09 9:39 ` Heiko Stübner [this message]
2026-07-29 13:27 ` [PATCH v3 2/4] dt-bindings: gpio: rockchip,gpio-bank: Add rockchip,grf property Simon Glass
2026-08-04 6:51 ` Krzysztof Kozlowski
2026-08-09 9:42 ` Heiko Stübner
2026-07-29 13:27 ` [PATCH v3 3/4] dt-bindings: pinctrl: rockchip: Add RV1106 compatible Simon Glass
2026-08-09 9:43 ` Heiko Stübner
2026-07-29 13:27 ` [PATCH v3 4/4] pinctrl: rockchip: Add RV1106 pinctrl support Simon Glass
2026-08-09 9:51 ` Heiko Stübner
2026-08-10 11:38 ` (subset) [PATCH v3 0/4] pinctrl: Add support for the Rockchip RV1106 Bartosz Golaszewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8942531.Sb9uPGUboI@diego \
--to=heiko@sntech.de \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=hl@rock-chips.com \
--cc=jeffy.chen@rock-chips.com \
--cc=jonas@kwiboo.se \
--cc=krzk+dt@kernel.org \
--cc=linusw@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=robh@kernel.org \
--cc=sjg@chromium.org \
--cc=ye.zhang@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).