linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Hans de Goede <hdegoede@redhat.com>
To: Andy Shevchenko <andy@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	Mika Westerberg <mika.westerberg@linux.intel.com>,
	linux-mmc@vger.kernel.org, linux-gpio@vger.kernel.org
Subject: Re: [PATCH 4/6] mmc: sdhci-acpi: Disable UHS/1.8V modes on Lenovo Yoga Tablet 2 series sdcard slot
Date: Mon, 8 Apr 2024 17:22:05 +0200	[thread overview]
Message-ID: <8e1e561f-3d34-4023-bae1-08bce71ebe55@redhat.com> (raw)
In-Reply-To: <ZhQK6K0OUrXmrtWQ@smile.fi.intel.com>

Hi,

On 4/8/24 5:19 PM, Andy Shevchenko wrote:
> On Sun, Apr 07, 2024 at 10:04:51PM +0200, Hans de Goede wrote:
>> Unlike all other Bay Trail devices I have (quite a few) the BIOS on
>> the Lenovo Yoga Tablet 2 830 / 1050 and Lenovo Yoga Tablet 2 Pro 1380 (8",
>> 10" and 13") models sets the SDHCI_SUPPORT_DDR50 bit in the sdcard slots'
>> SDHCI controller's Caps_1 register which causes Linux to try and use
>> UHS SDR12 / SDR25 and DDR50 modes on UHS cards.
>>
>> These tablets do have 1.8V signalling implemented in the hw level through
>> the Bay Trail SoC's SD3_1P8EN pin. But trying to use UHS modes leads to
>> lots of errors like these:
>>
>> [  225.272001] mmc2: Unexpected interrupt 0x04000000.
>> [  225.272024] mmc2: sdhci: ============ SDHCI REGISTER DUMP ===========
>> [  225.272034] mmc2: sdhci: Sys addr:  0x0712c400 | Version:  0x0000b502
>> [  225.272044] mmc2: sdhci: Blk size:  0x00007200 | Blk cnt:  0x00000007
>> [  225.272054] mmc2: sdhci: Argument:  0x00000000 | Trn mode: 0x00000023
>> [  225.272064] mmc2: sdhci: Present:   0x01e20002 | Host ctl: 0x00000016
>> [  225.272073] mmc2: sdhci: Power:     0x0000000f | Blk gap:  0x00000000
>> [  225.272082] mmc2: sdhci: Wake-up:   0x00000000 | Clock:    0x00000107
>> [  225.272092] mmc2: sdhci: Timeout:   0x0000000e | Int stat: 0x00000001
>> [  225.272101] mmc2: sdhci: Int enab:  0x03ff000b | Sig enab: 0x03ff000b
>> [  225.272110] mmc2: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000001
>> [  225.272119] mmc2: sdhci: Caps:      0x076864b2 | Caps_1:   0x00000004
>> [  225.272129] mmc2: sdhci: Cmd:       0x00000c1b | Max curr: 0x00000000
>> [  225.272138] mmc2: sdhci: Resp[0]:   0x00000c00 | Resp[1]:  0x00000000
>> [  225.272147] mmc2: sdhci: Resp[2]:   0x00000000 | Resp[3]:  0x00000900
>> [  225.272155] mmc2: sdhci: Host ctl2: 0x0000000c
>> [  225.272164] mmc2: sdhci: ADMA Err:  0x00000003 | ADMA Ptr: 0x0712c200
>> [  225.272172] mmc2: sdhci: ============================================
> 
>> Since sdhci_acpi_slot_int_emmc sets SDHCI_QUIRK2_PRESET_VALUE_BROKEN
> 
> sdhci_acpi_slot_int_emmc()
> 
> 
>> I tried setting that for sdhci_acpi_slot_int_sd too and that does makes
> 
> sdhci_acpi_slot_int_sd()

These are not functions but structs .

Regards,

Hans


> 
>> things mostly work, but the above error still sometimes happen and
>> regularly access to the card simply freezes for seconds, which are
>> problems which do not happen with the non UHS SDR50 mode.
>>
>> Add a new DMI_QUIRK_SD_NO_1_8_V DMI quirk flag and set that for these
>> tablets to disable sdcard slot UHS modes by setting SDHCI_QUIRK2_NO_1_8_V
>> for the sdcard slot when this quirk is set.
> 


  reply	other threads:[~2024-04-08 15:22 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-04-07 20:04 [PATCH 1/6] mmc: core: Add mmc_gpiod_set_cd_config() function Hans de Goede
2024-04-07 20:04 ` [PATCH 2/6] mmc: sdhci-acpi: Sort DMI quirks alphabetically Hans de Goede
2024-04-07 20:04 ` [PATCH 3/6] mmc: sdhci-acpi: Fix Lenovo Yoga Tablet 2 Pro 1380 sdcard slot not working Hans de Goede
2024-04-07 20:04 ` [PATCH 4/6] mmc: sdhci-acpi: Disable UHS/1.8V modes on Lenovo Yoga Tablet 2 series sdcard slot Hans de Goede
2024-04-08 15:19   ` Andy Shevchenko
2024-04-08 15:22     ` Hans de Goede [this message]
2024-04-08 15:26       ` Andy Shevchenko
2024-04-07 20:04 ` [PATCH 5/6] mmc: sdhci-acpi: Disable write protect detection on Toshiba WT10-A Hans de Goede
2024-04-07 20:04 ` [PATCH 6/6] mmc: sdhci-acpi: Add quirk to enable pull-up on the card-detect GPIO on Asus T100TA Hans de Goede
2024-04-08 15:22   ` Andy Shevchenko
2024-04-08 15:16 ` [PATCH 1/6] mmc: core: Add mmc_gpiod_set_cd_config() function Andy Shevchenko
2024-04-08 15:21   ` Hans de Goede
2024-04-08 15:23 ` Andy Shevchenko
2024-04-08 15:27   ` Hans de Goede
2024-04-08 15:35     ` Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=8e1e561f-3d34-4023-bae1-08bce71ebe55@redhat.com \
    --to=hdegoede@redhat.com \
    --cc=adrian.hunter@intel.com \
    --cc=andy@kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=mika.westerberg@linux.intel.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).