From: William Breathitt Gray <vilhelm.gray@gmail.com>
To: linus.walleij@linaro.org, bgolaszewski@baylibre.com
Cc: akpm@linux-foundation.org, linux-gpio@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-arch@vger.kernel.org,
andriy.shevchenko@linux.intel.com, linux@rasmusvillemoes.dk,
yamada.masahiro@socionext.com,
linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org,
geert@linux-m68k.org, preid@electromag.com.au, lukas@wunner.de,
sean.nyekjaer@prevas.dk, morten.tiljeset@prevas.dk,
William Breathitt Gray <vilhelm.gray@gmail.com>
Subject: [PATCH v16 11/14] thermal: intel: intel_soc_dts_iosf: Utilize for_each_set_clump8 macro
Date: Sun, 6 Oct 2019 11:11:08 -0400 [thread overview]
Message-ID: <8e85aa4ccead5c330d7abdbda292f32a0c48902e.1570374078.git.vilhelm.gray@gmail.com> (raw)
In-Reply-To: <cover.1570374078.git.vilhelm.gray@gmail.com>
Utilize for_each_set_clump8 macro, and the bitmap_set_value8 and
bitmap_get_value8 functions, where appropriate. In addition, remove the
now unnecessary temp_mask and temp_shift members of the
intel_soc_dts_sensor_entry structure.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
---
drivers/thermal/intel/intel_soc_dts_iosf.c | 29 +++++++++++++---------
drivers/thermal/intel/intel_soc_dts_iosf.h | 2 --
2 files changed, 17 insertions(+), 14 deletions(-)
diff --git a/drivers/thermal/intel/intel_soc_dts_iosf.c b/drivers/thermal/intel/intel_soc_dts_iosf.c
index 5716b62e0f73..901f64bb5b9c 100644
--- a/drivers/thermal/intel/intel_soc_dts_iosf.c
+++ b/drivers/thermal/intel/intel_soc_dts_iosf.c
@@ -6,6 +6,7 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#include <linux/bitops.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
@@ -102,6 +103,7 @@ static int update_trip_temp(struct intel_soc_dts_sensor_entry *dts,
{
int status;
u32 temp_out;
+ unsigned long update_ptps;
u32 out;
u32 store_ptps;
u32 store_ptmc;
@@ -120,8 +122,9 @@ static int update_trip_temp(struct intel_soc_dts_sensor_entry *dts,
if (status)
return status;
- out = (store_ptps & ~(0xFF << (thres_index * 8)));
- out |= (temp_out & 0xFF) << (thres_index * 8);
+ update_ptps = store_ptps;
+ bitmap_set_value8(&update_ptps, temp_out & 0xFF, thres_index * 8);
+ out = update_ptps;
status = iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE,
SOC_DTS_OFFSET_PTPS, out);
if (status)
@@ -223,6 +226,7 @@ static int sys_get_curr_temp(struct thermal_zone_device *tzd,
u32 out;
struct intel_soc_dts_sensor_entry *dts;
struct intel_soc_dts_sensors *sensors;
+ unsigned long temp_raw;
dts = tzd->devdata;
sensors = dts->sensors;
@@ -231,7 +235,8 @@ static int sys_get_curr_temp(struct thermal_zone_device *tzd,
if (status)
return status;
- out = (out & dts->temp_mask) >> dts->temp_shift;
+ temp_raw = out;
+ out = bitmap_get_value8(&temp_raw, dts->id * 8);
out -= SOC_DTS_TJMAX_ENCODING;
*temp = sensors->tj_max - out * 1000;
@@ -281,10 +286,13 @@ static int add_dts_thermal_zone(int id, struct intel_soc_dts_sensor_entry *dts,
{
char name[10];
int trip_count = 0;
+ int writable_trip_count = 0;
int trip_mask = 0;
u32 store_ptps;
int ret;
- int i;
+ unsigned long i;
+ unsigned long trip;
+ unsigned long ptps;
/* Store status to restor on exit */
ret = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ,
@@ -293,11 +301,10 @@ static int add_dts_thermal_zone(int id, struct intel_soc_dts_sensor_entry *dts,
goto err_ret;
dts->id = id;
- dts->temp_mask = 0x00FF << (id * 8);
- dts->temp_shift = id * 8;
if (notification_support) {
trip_count = min(SOC_MAX_DTS_TRIPS, trip_cnt);
- trip_mask = BIT(trip_count - read_only_trip_cnt) - 1;
+ writable_trip_count = trip_count - read_only_trip_cnt;
+ trip_mask = GENMASK(writable_trip_count - 1, 0);
}
/* Check if the writable trip we provide is not used by BIOS */
@@ -306,11 +313,9 @@ static int add_dts_thermal_zone(int id, struct intel_soc_dts_sensor_entry *dts,
if (ret)
trip_mask = 0;
else {
- for (i = 0; i < trip_count; ++i) {
- if (trip_mask & BIT(i))
- if (store_ptps & (0xff << (i * 8)))
- trip_mask &= ~BIT(i);
- }
+ ptps = store_ptps;
+ for_each_set_clump8(i, trip, &ptps, writable_trip_count * 8)
+ trip_mask &= ~BIT(i / 8);
}
dts->trip_mask = trip_mask;
dts->trip_count = trip_count;
diff --git a/drivers/thermal/intel/intel_soc_dts_iosf.h b/drivers/thermal/intel/intel_soc_dts_iosf.h
index adfb09af33fc..c54945748200 100644
--- a/drivers/thermal/intel/intel_soc_dts_iosf.h
+++ b/drivers/thermal/intel/intel_soc_dts_iosf.h
@@ -24,8 +24,6 @@ struct intel_soc_dts_sensors;
struct intel_soc_dts_sensor_entry {
int id;
- u32 temp_mask;
- u32 temp_shift;
u32 store_status;
u32 trip_mask;
u32 trip_count;
--
2.23.0
next prev parent reply other threads:[~2019-10-06 15:12 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-06 15:10 [PATCH v16 00/14] Introduce the for_each_set_clump8 macro William Breathitt Gray
2019-10-06 15:10 ` [PATCH v16 01/14] bitops: " William Breathitt Gray
2019-10-07 8:21 ` Andy Shevchenko
2019-10-07 15:18 ` William Breathitt Gray
2019-10-06 15:10 ` [PATCH v16 02/14] lib/test_bitmap.c: Add for_each_set_clump8 test cases William Breathitt Gray
2019-10-06 15:11 ` [PATCH v16 03/14] gpio: 104-dio-48e: Utilize for_each_set_clump8 macro William Breathitt Gray
2019-10-06 15:11 ` [PATCH v16 04/14] gpio: 104-idi-48: " William Breathitt Gray
2019-10-06 15:11 ` [PATCH v16 05/14] gpio: gpio-mm: " William Breathitt Gray
2019-10-06 15:11 ` [PATCH v16 06/14] gpio: ws16c48: " William Breathitt Gray
2019-10-06 15:11 ` [PATCH v16 07/14] gpio: pci-idio-16: " William Breathitt Gray
2019-10-06 15:11 ` [PATCH v16 08/14] gpio: pcie-idio-24: " William Breathitt Gray
2019-10-06 15:11 ` [PATCH v16 09/14] gpio: uniphier: " William Breathitt Gray
2019-10-06 15:11 ` [PATCH v16 10/14] gpio: 74x164: Utilize the " William Breathitt Gray
2019-10-07 8:24 ` Andy Shevchenko
2019-10-06 15:11 ` William Breathitt Gray [this message]
2019-10-07 8:44 ` [PATCH v16 11/14] thermal: intel: intel_soc_dts_iosf: Utilize " Andy Shevchenko
2019-10-06 15:11 ` [PATCH v16 12/14] gpio: pisosr: Utilize the " William Breathitt Gray
2019-10-06 15:11 ` [PATCH v16 13/14] gpio: max3191x: " William Breathitt Gray
2019-10-06 15:11 ` [PATCH v16 14/14] gpio: pca953x: " William Breathitt Gray
2019-10-07 8:45 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8e85aa4ccead5c330d7abdbda292f32a0c48902e.1570374078.git.vilhelm.gray@gmail.com \
--to=vilhelm.gray@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=andriy.shevchenko@linux.intel.com \
--cc=bgolaszewski@baylibre.com \
--cc=geert@linux-m68k.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arch@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux@rasmusvillemoes.dk \
--cc=lukas@wunner.de \
--cc=morten.tiljeset@prevas.dk \
--cc=preid@electromag.com.au \
--cc=sean.nyekjaer@prevas.dk \
--cc=yamada.masahiro@socionext.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).