messages from 2025-11-02 10:23:03 to 2025-11-05 14:10:36 UTC [more...]
[PATCH v5 0/8] reset: rework reset-gpios handling
2025-11-05 14:10 UTC (12+ messages)
` [PATCH v5 1/8] software node: read the reference args via the fwnode API
` [PATCH v5 2/8] software node: increase the reference of the swnode by its fwnode
` [PATCH v5 3/8] software node: allow referencing firmware nodes
` [PATCH v5 4/8] gpio: swnode: allow referencing GPIO chips by "
` [PATCH v5 5/8] reset: order includes alphabetically in reset/core.c
` [PATCH v5 6/8] reset: make the provider of reset-gpios the parent of the reset device
` [PATCH v5 7/8] reset: gpio: convert the driver to using the auxiliary bus
` [PATCH v5 8/8] reset: gpio: use software nodes to setup the GPIO lookup
[PATCH v1 0/6] Add Bananapi R4 Pro support
2025-11-05 13:31 UTC (7+ messages)
` [PATCH v1 1/6] dt-bindings: pinctrl: mt7988: allow gpio-hogs
` [PATCH v1 4/6] arm64: dts: mt7988: Add devicetree for BananaPi R4 Pro
` (subset) [PATCH v1 0/6] Add Bananapi R4 Pro support
[PATCH v4 0/2] add gpio-line-mux
2025-11-05 13:28 UTC (8+ messages)
` [PATCH v4 1/2] dt-bindings: gpio: add gpio-line-mux controller
` [PATCH v4 2/2] gpio: add gpio-line-mux driver
[PATCH v7 0/2] clk: add support for TI CDCE6214
2025-11-05 12:33 UTC (2+ messages)
[PATCH v3 0/3] hwmon: Add support for the LTC4283 Hot Swap Controller
2025-11-05 12:12 UTC (6+ messages)
` [PATCH v3 1/3] dt-bindings: hwmon: Document the LTC4283 "
` [PATCH v3 2/3] hwmon: ltc4283: Add support for "
` [PATCH v3 3/3] gpio: gpio-ltc4283: "
[PATCH v1 00/10] pinctrl: intel: Consolidate struct intel_padgroup initialisers
2025-11-05 11:55 UTC (16+ messages)
` [PATCH v1 01/10] pinctrl: intel: Introduce INTEL_GPP() macro
` [PATCH v1 02/10] pinctrl: alderlake: Switch to "
` [PATCH v1 03/10] pinctrl: cannonlake: "
` [PATCH v1 04/10] pinctrl: icelake: "
` [PATCH v1 05/10] pinctrl: jasperlake: "
` [PATCH v1 06/10] pinctrl: lakefield: "
` [PATCH v1 07/10] pinctrl: meteorlake: "
` [PATCH v1 08/10] pinctrl: meteorpoint: "
` [PATCH v1 09/10] pinctrl: tigerlake: "
` [PATCH v1 10/10] pinctrl: sunrisepoint: "
[PATCH v3 00/16] Support ROHM BD72720 PMIC
2025-11-05 11:39 UTC (22+ messages)
` [PATCH v3 01/16] dt-bindings: regulator: ROHM BD72720
` [PATCH v3 02/16] dt-bindings: battery: Clarify trickle-charge
` [PATCH v3 03/16] dt-bindings: battery: Add trickle-charge upper limit
` [PATCH v3 04/16] dt-bindings: power: supply: BD72720 managed battery
` [PATCH v3 05/16] dt-bindings: mfd: ROHM BD72720
` [PATCH v3 06/16] dt-bindings: leds: bd72720: Add BD72720
` [PATCH v3 07/16] mfd: rohm-bd71828: Use regmap_reg_range()
` [PATCH v3 08/16] mfd: bd71828: Support ROHM BD72720
` [PATCH v3 09/16] regulator: bd71828: rename IC specific entities
` [PATCH v3 10/16] regulator: bd71828: Support ROHM BD72720
` [PATCH v3 11/16] gpio: Support ROHM BD72720 gpios
` [PATCH v3 12/16] clk: clk-bd718x7: Support BD72720 clk gate
` [PATCH v3 13/16] rtc: bd70528: Support BD72720 rtc
` [PATCH v3 14/16] power: supply: bd71828: Support wider register addresses
` [PATCH v3 15/16] power: supply: bd71828-power: Support ROHM BD72720
` [PATCH v3 16/16] MAINTAINERS: Add ROHM BD72720 PMIC
[PATCH 0/1] replace uses of system_wq with system_percpu_wq
2025-11-05 11:16 UTC (3+ messages)
[PATCH] pinctrl: stm32: handle semaphore acquisition when handling pinctrl/pinmux
2025-11-05 10:50 UTC
[PATCH] gpio: aggregator: restore the set_config operation
2025-11-05 10:39 UTC (5+ messages)
[PATCH v5 0/5] Enable Remote GPIO over RPMSG on i.MX Platform
2025-11-05 10:25 UTC (3+ messages)
[PATCH v3 0/2] add gpio-line-mux
2025-11-05 9:31 UTC (6+ messages)
` [PATCH v3 1/2] dt-bindings: gpio: add gpio-line-mux controller
` [PATCH v3 2/2] gpio: add gpio-line-mux driver
[PATCH] gpio: menz127: add support for 16Z034 and 16Z037 GPIO controllers
2025-11-05 8:36 UTC (2+ messages)
[PATCH 0/5] pinctrl: renesas: rcar-v4x: Remove removed signals
2025-11-05 8:34 UTC (12+ messages)
` [PATCH 1/5] pinctrl: renesas: r8a779g0: Remove AVB[01]_MII
` [PATCH 2/5] pinctrl: renesas: r8a779g0: Remove CC5_OSCOUT
` [PATCH 3/5] pinctrl: renesas: r8a779g0: Remove STPWT_EXTFXR
` [PATCH 4/5] pinctrl: renesas: r8a779h0: Remove CC5_OSCOUT
` [PATCH 5/5] pinctrl: renesas: r8a779h0: Remove STPWT_EXTFXR
[PATCH] Pinctrl: core: export pinctrl_provide_dummies() to fix build error
2025-11-05 1:50 UTC (5+ messages)
` 回复: "
[PATCH] pinctrl: cix: sky1: Provide pin control dummy states
2025-11-05 1:42 UTC (3+ messages)
` 回复: "
amd_gpio AMDI0030:00: iomux not supported
2025-11-04 18:45 UTC (2+ messages)
amd_gpio AMDI0030:00: failed to lookup the [default,sleep] state
2025-11-04 18:45 UTC (2+ messages)
[brgl:gpio/for-current] BUILD SUCCESS 2f6115ad8864cf3f48598f26c74c7c8e5c391919
2025-11-04 16:10 UTC
[PATCH v2 0/2] add gpio-line-mux
2025-11-04 14:57 UTC (4+ messages)
` [PATCH v2 2/2] gpio: add gpio-line-mux driver
[PATCH v3 00/20] Samsung S2MPG10 regulator and S2MPG11 PMIC drivers
2025-11-04 14:27 UTC (31+ messages)
` [PATCH v3 01/20] dt-bindings: firmware: google,gs101-acpm-ipc: convert regulators to lowercase
` [PATCH v3 02/20] dt-bindings: mfd: samsung,s2mps11: split s2mpg10 into separate file
` [PATCH v3 03/20] regulator: dt-bindings: add s2mpg10-pmic regulators
` [PATCH v3 04/20] regulator: dt-bindings: add s2mpg11-pmic regulators
` [PATCH v3 05/20] dt-bindings: mfd: samsung,s2mpg10: Link s2mpg10-pmic to its regulators
` [PATCH v3 06/20] dt-bindings: mfd: samsung,s2mpg10: Add s2mpg11-pmic
` [PATCH v3 07/20] dt-bindings: firmware: google,gs101-acpm-ipc: update PMIC examples
` [PATCH v3 08/20] mfd: sec-common: Instantiate s2mpg10 bucks and ldos separately
` [PATCH v3 09/20] mfd: sec: Add support for S2MPG11 PMIC via ACPM
` [PATCH v3 10/20] regulator: add REGULATOR_LINEAR_VRANGE macro
` [PATCH v3 11/20] regulator: s2mps11: drop two needless variable initialisations
` [PATCH v3 12/20] regulator: s2mps11: use dev_err_probe() where appropriate
` [PATCH v3 13/20] regulator: s2mps11: place constants on right side of comparison tests
` [PATCH v3 14/20] regulator: s2mps11: update node parsing (allow -supply properties)
` [PATCH v3 15/20] regulator: s2mps11: refactor handling of external rail control
` [PATCH v3 16/20] regulator: s2mps11: add S2MPG10 regulator
` [PATCH v3 17/20] regulator: s2mps11: refactor S2MPG10 ::set_voltage_time() for S2MPG11 reuse
` [PATCH v3 18/20] regulator: s2mps11: refactor S2MPG10 regulator macros "
` [PATCH v3 19/20] regulator: s2mps11: add S2MPG11 regulator
` [PATCH v3 20/20] regulator: s2mps11: more descriptive gpio consumer name
[PATCH v1 0/3] pinctrl: rockchip: Add RK3506 pinctrl support
2025-11-04 14:06 UTC (8+ messages)
` [PATCH v1 1/3] dt-bindings: pinctrl: Add rk3506 "
` [PATCH v1 2/3] pinctrl: rockchip: "
` [PATCH v1 3/3] pinctrl: rockchip: add rk3506 rmio support
[PATCH AUTOSEL 6.17-5.4] ASoC: pxa: add GPIOLIB_LEGACY dependency
2025-11-04 13:55 UTC (6+ messages)
` [PATCH AUTOSEL 6.17-5.15] media: em28xx: add special case for legacy gpiolib interface
[PATCH v1 0/4] pinctrl: intel: Unify error messages
2025-11-04 8:31 UTC (7+ messages)
` [PATCH v1 1/4] pinctrl: baytrail: Unify messages with help of dev_err_probe()
` [PATCH v1 2/4] pinctrl: cherryview: "
` [PATCH v1 3/4] pinctrl: intel: "
` [PATCH v1 4/4] pinctrl: tangier: "
[PATCH AUTOSEL 6.17-5.4] mfd: si476x: Add GPIOLIB_LEGACY dependency
2025-11-04 0:30 UTC (3+ messages)
[PATCH v2] gpiolib: fix invalid pointer access in debugfs
2025-11-03 15:11 UTC (3+ messages)
[PATCH v4 00/10] reset: rework reset-gpios handling
2025-11-03 14:14 UTC (23+ messages)
` [PATCH v4 01/10] software node: read the reference args via the fwnode API
` [PATCH v4 02/10] software node: increase the reference of the swnode by its fwnode
` [PATCH v4 03/10] software node: allow referencing firmware nodes
` [PATCH v4 04/10] gpio: swnode: don't use the swnode's name as the key for GPIO lookup
` [PATCH v4 05/10] gpio: swnode: allow referencing GPIO chips by firmware nodes
` [PATCH v4 06/10] gpio: swnode: update the property definitions
` [PATCH v4 07/10] reset: order includes alphabetically in reset/core.c
` [PATCH v4 08/10] reset: make the provider of reset-gpios the parent of the reset device
` [PATCH v4 09/10] reset: gpio: convert the driver to using the auxiliary bus
` [PATCH v4 10/10] reset: gpio: use software nodes to setup the GPIO lookup
` (subset) [PATCH v4 00/10] reset: rework reset-gpios handling
[PATCH v4 00/29] lan966x pci device: Add support for SFPs
2025-11-03 13:34 UTC (4+ messages)
` [PATCH v4 18/29] i2c: mux: Create missing devlink between mux and adapter physical device
[PATCH 0/2] gpio: Add support for ADG1712 quad SPST switch
2025-11-03 11:18 UTC (3+ messages)
` [PATCH 2/2] gpio: adg1712: add driver support
[PATCH v5] dt-bindings: gpio: ti,twl4030: Correct the schema $id path
2025-11-03 10:48 UTC (3+ messages)
[PATCH v5 00/23] Non-const bitfield helpers
2025-11-03 10:09 UTC (8+ messages)
` [PATCH v5 07/23] pinctrl: ma35: #undef field_{get,prep}() before local definition
` [PATCH -next v5 10/23] iio: imu: smi330: #undef field_{get,prep}() before definition
[PATCH] gpiolib: fix invalid pointer access in debugfs
2025-11-03 7:45 UTC (2+ messages)
[PATCH v7 0/3] arm64: dts: ti: introduce basic support for the AM62L
2025-11-03 7:39 UTC (5+ messages)
` [PATCH v7 2/3] arm64: dts: ti: k3-am62l: add initial infrastructure
` [PATCH v7 3/3] arm64: dts: ti: k3-am62l: add initial reference board file
[PATCH] power: supply: Add SC8541 charger drivers
2025-11-02 22:55 UTC (2+ messages)
[PATCH 1/2] gpio: fxl6408: Add optional reset gpio control
2025-11-02 22:35 UTC (3+ messages)
[PATCH v3 0/3] Add support for PM7550 PMIC
2025-11-02 17:36 UTC (5+ messages)
` [PATCH v3 1/3] dt-bindings: leds: qcom,spmi-flash-led: Add PM7550
` [PATCH v3 2/3] dt-bindings: mfd: qcom-spmi-pmic: Document PM7550 PMIC
[PATCH v3 0/2] Add support for PMIV0104 PMIC
2025-11-02 17:32 UTC (3+ messages)
` [PATCH v3 1/2] dt-bindings: mfd: qcom,spmi-pmic: Document PMIV0104
[PATCH 0/2] gpio: fxl6408: add optional reset and suspend/resume
2025-11-02 10:05 UTC (2+ messages)
` [PATCH 2/2] gpio: fxl6408: Add suspend/resume support
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).