messages from 2026-08-27 08:45:39 to 2026-08-31 11:36:04 UTC [more...]
[PATCH v7 00/21] Add basic pinctrl drivers for JHB100 SoC
2026-08-31 11:35 UTC (20+ messages)
` [PATCH v7 01/21] dt-bindings: pincfg-node: Add property 'input-debounce-ns'
` [PATCH v7 02/21] pinctrl: pinconf-generic: "
` [PATCH v7 03/21] dt-bindings: pinctrl: Add starfive,jhb100-sys0-pinctrl
` [PATCH v7 04/21] pinctrl: starfive: Add StarFive JHB100 sys0 controller driver
` [PATCH v7 05/21] dt-bindings: pinctrl: Add starfive,jhb100-sys0h-pinctrl
` [PATCH v7 06/21] pinctrl: starfive: Add StarFive JHB100 sys0h controller driver
` [PATCH v7 07/21] dt-bindings: pinctrl: Add starfive,jhb100-sys1-pinctrl
` [PATCH v7 08/21] pinctrl: starfive: Add StarFive JHB100 sys1 controller driver
` [PATCH v7 09/21] dt-bindings: pinctrl: Add starfive,jhb100-sys2-pinctrl
` [PATCH v7 10/21] pinctrl: starfive: Add StarFive JHB100 sys2 controller driver
` [PATCH v7 11/21] dt-bindings: pinctrl: Add starfive,jhb100-per0-pinctrl
` [PATCH v7 12/21] pinctrl: starfive: Add StarFive JHB100 per0 controller driver
` [PATCH v7 13/21] dt-bindings: pinctrl: Add starfive,jhb100-per1-pinctrl
` [PATCH v7 14/21] pinctrl: starfive: Add StarFive JHB100 per1 controller driver
` [PATCH v7 15/21] dt-bindings: pinctrl: Add starfive,jhb100-per2-pinctrl
` [PATCH v7 16/21] pinctrl: starfive: Add StarFive JHB100 per2 controller driver
` [PATCH v7 17/21] dt-bindings: pinctrl: Add starfive,jhb100-per2pok-pinctrl
` [PATCH v7 18/21] pinctrl: starfive: Add StarFive JHB100 per2pok controller driver
` [PATCH v7 19/21] dt-bindings: pinctrl: Add starfive,jhb100-per3-pinctrl
[PATCH v1 0/3] pinctrl: mpfs-mssio: three fixes
2026-08-31 10:50 UTC (4+ messages)
` [PATCH v1 1/3] pinctrl: mpfs-mssio: fix whitespace in debugfs output
` [PATCH v1 2/3] pinctrl: mpfs-mssio: fix width of unused bank voltage setting
` [PATCH v1 3/3] pinctrl: mpfs-mssio: use correct regmap function to set bank voltage
[PATCH 0/2] pinctrl: qcom: Add PMAU0102 GPIO support
2026-08-31 9:31 UTC (4+ messages)
` [PATCH 1/2] dt-bindings: pinctrl: qcom,pmic-gpio: Document "
` [PATCH 2/2] pinctrl: qcom: spmi-gpio: Add "
[PATCH v5 00/20] iio: adc: Add AD7768/AD7768-4 ADC driver support
2026-08-31 9:04 UTC (33+ messages)
` [PATCH v5 01/20] iio: adc: adi-axi-adc: Initialize state mutex
` [PATCH v5 02/20] dt-bindings: iio: adc: Add AD7768
` [PATCH v5 03/20] iio: backend: Add support for CRC
` [PATCH v5 04/20] iio: adc: adi-axi-adc: "
` [PATCH v5 05/20] iio: adc: Add AD7768 and AD7768-4 core support
` [PATCH v5 06/20] iio: adc: ad7768: Validate master clock rate
` [PATCH v5 07/20] iio: adc: ad7768: Add power mode helper
` [PATCH v5 08/20] iio: adc: ad7768: Derive output data rates
` [PATCH v5 09/20] iio: adc: ad7768: Configure channel sampling profiles
` [PATCH v5 10/20] iio: adc: ad7768: Add sampling frequency controls
` [PATCH v5 11/20] iio: adc: ad7768: Add per-channel filter controls
` [PATCH v5 12/20] iio: adc: ad7768: Wait for digital filters to settle
` [PATCH v5 13/20] iio: adc: ad7768: Add calibration controls
` [PATCH v5 14/20] iio: adc: ad7768: Add per-channel conversion delay
` [PATCH v5 15/20] iio: adc: ad7768: Add VCM regulator support
` [PATCH v5 16/20] iio: adc: ad7768: Register GPIO auxiliary device
` [PATCH v5 17/20] gpio: regmap: Use regmap_test_bits() for single bit reads
` [PATCH v5 18/20] gpio: regmap: Add optional runtime PM support
` [PATCH v5 19/20] gpio: ad7768: Add AD7768 GPIO auxiliary driver
` [PATCH v5 20/20] Documentation: iio: Add AD7768 Documentation
[PATCH v5 00/15] Add initial support for Qualcomm Kuno SoC
2026-08-31 7:20 UTC (18+ messages)
` [PATCH v5 01/15] soc: qcom: geni-se: allow selection on 32-bit ARM Qualcomm SoCs
` [PATCH v5 02/15] dt-bindings: power: rpmpd: Document Kuno RPMh power domains
` [PATCH v5 03/15] pmdomain: qcom: rpmhpd: Add power domains for Kuno
` [PATCH v5 04/15] dt-bindings: clock: qcom,rpmhcc: Add Kuno RPMh clock controller
` [PATCH v5 05/15] clk: qcom: clk-rpmh: Add support for Kuno RPMh clocks
` [PATCH v5 06/15] dt-bindings: interconnect: Add Qualcomm Kuno NoC
` [PATCH v5 07/15] interconnect: qcom: Add Kuno interconnect provider driver
` [PATCH v5 08/15] dt-bindings: pinctrl: qcom: Add Kuno TLMM
` [PATCH v5 09/15] pinctrl: qcom: Add Kuno pinctrl driver
` [PATCH v5 10/15] dt-bindings: clock: qcom: Add Kuno Global Clock Controller
` [PATCH v5 11/15] clk: qcom: Add Global Clock Controller driver for Kuno
` [PATCH v5 12/15] dt-bindings: interrupt-controller: qcom,pdc: Add Kuno compatible string
` [PATCH v5 13/15] dt-bindings: firmware: qcom,scm: Document SCM on Kuno SoC
` [PATCH v5 14/15] dt-bindings: arm: qcom: Document Kuno IDP board
` [PATCH v5 15/15] ARM: dts: qcom: Add initial device tree for Kuno SoC
[PATCH v3 0/9] iio: adc: Add TI ADS126X ADC family support
2026-08-31 2:10 UTC (9+ messages)
` [PATCH v3 7/9] iio: adc: ti-ads1262: support triggered buffer sampling
[PATCH v1 4/4] pinctrl: pistachio: Replace open coded fwnode_is_gpiochip()
2026-08-30 21:13 UTC (4+ messages)
[PATCH v5 0/6] Add Samsung Galaxy S4 support
2026-08-30 20:18 UTC (7+ messages)
` [PATCH v5 2/6] pinctrl: qcom: Register functions before enabling pinctrl
` [PATCH v5 4/6] mfd: qcom-pm8xxx: register PM8921 USB ID extcon
[PATCH] dt-bindings: fix typos in various bindings
2026-08-30 18:19 UTC (5+ messages)
` [PATCH v2] "
[PATCH v3] dt-bindings: pinctrl: ti,pinctrl-palmas: Convert to DT schema
2026-08-30 9:36 UTC (2+ messages)
[PATCH v6 00/21] Add basic pinctrl drivers for JHB100 SoC
2026-08-30 8:57 UTC (27+ messages)
` [PATCH v6 01/21] dt-bindings: pincfg-node: Add property 'input-debounce-ns'
` [PATCH v6 02/21] pinctrl: pinconf-generic: "
` [PATCH v6 03/21] dt-bindings: pinctrl: Add starfive,jhb100-sys0-pinctrl
` [PATCH v6 04/21] pinctrl: starfive: Add StarFive JHB100 sys0 controller driver
` [PATCH v6 05/21] dt-bindings: pinctrl: Add starfive,jhb100-sys0h-pinctrl
` [PATCH v6 06/21] pinctrl: starfive: Add StarFive JHB100 sys0h controller driver
` [PATCH v6 07/21] dt-bindings: pinctrl: Add starfive,jhb100-sys1-pinctrl
` [PATCH v6 08/21] pinctrl: starfive: Add StarFive JHB100 sys1 controller driver
` [PATCH v6 09/21] dt-bindings: pinctrl: Add starfive,jhb100-sys2-pinctrl
` [PATCH v6 10/21] pinctrl: starfive: Add StarFive JHB100 sys2 controller driver
` [PATCH v6 11/21] dt-bindings: pinctrl: Add starfive,jhb100-per0-pinctrl
` [PATCH v6 12/21] pinctrl: starfive: Add StarFive JHB100 per0 controller driver
` [PATCH v6 13/21] dt-bindings: pinctrl: Add starfive,jhb100-per1-pinctrl
` [PATCH v6 14/21] pinctrl: starfive: Add StarFive JHB100 per1 controller driver
` [PATCH v6 15/21] dt-bindings: pinctrl: Add starfive,jhb100-per2-pinctrl
` [PATCH v6 16/21] pinctrl: starfive: Add StarFive JHB100 per2 controller driver
` [PATCH v6 17/21] dt-bindings: pinctrl: Add starfive,jhb100-per2pok-pinctrl
` [PATCH v6 18/21] pinctrl: starfive: Add StarFive JHB100 per2pok controller driver
` [PATCH v6 19/21] dt-bindings: pinctrl: Add starfive,jhb100-per3-pinctrl
` [PATCH v6 20/21] pinctrl: starfive: Add StarFive JHB100 per3 controller driver
` [PATCH v6 21/21] riscv: dts: starfive: jhb100: Add pinctrl nodes
[PATCH v2] dt-bindings: pinctrl: fsl: Replace tabs with spaces
2026-08-30 8:41 UTC
[PATCH v2] pinctrl: qcom: nord: Split QUP1 SE2/SE3 into lane-pair functions
2026-08-30 3:02 UTC
[PATCH v5 00/21] Add basic pinctrl drivers for JHB100 SoC
2026-08-30 1:32 UTC (14+ messages)
` [PATCH v5 03/21] dt-bindings: pinctrl: Add starfive,jhb100-sys0-pinctrl
[PATCH] dt-bindings: pinctrl: fsl: Replace tabs with spaces
2026-08-29 19:42 UTC
[PATCH v7 0/6] rtc: s35390a: Allow use of output pin for interrupt signal 1 for wakealarm
2026-08-29 14:22 UTC (7+ messages)
` [PATCH v7 1/6] dt-bindings: rtc: Add pinctrl for S35390A
` [PATCH v7 3/6] rtc: s35390a: Fix alarm not disabling
` [PATCH v7 2/6] rtc: s35390a: Add missing newline to dev_err
` [PATCH v7 5/6] rtc: s35390a: Add pinctrl
` [PATCH v7 4/6] rtc: s35390a: Read 24-hour mode on access
` [PATCH v7 6/6] rtc: s35390a: Add synology quirk
[PATCH v2 0/3] pinctrl: airoha: add EcoNet EN7528 pin controller support
2026-08-29 11:47 UTC (6+ messages)
` [PATCH v2 1/3] pinctrl: airoha: limit GPIO interrupts to interrupt-capable pins
` [PATCH v2 2/3] dt-bindings: pinctrl: Add EcoNet EN7528 pin controller
` [PATCH v2 3/3] pinctrl: airoha: add support of en7528 SoC
[PATCH] pinctrl: stm32: fix the unit of the hwspinlock timeout
2026-08-29 11:20 UTC (3+ messages)
` [PATCH v2] "
[PATCH 0/2] gpio: tegra186: Add support for Tegra268
2026-08-28 16:22 UTC (4+ messages)
` [PATCH 1/2] dt-bindings: gpio: Add compatible string "
` [PATCH 2/2] gpio: tegra186: Add support "
[PATCH] pinctrl: generic: serialise pinctrl_generic_dt_node_to_map()
2026-08-28 15:58 UTC
[PATCH 0/3] pinctrl: airoha: add EcoNet EN7528 pin controller support
2026-08-28 14:33 UTC (4+ messages)
` [PATCH 2/3] dt-bindings: pinctrl: Add EcoNet EN7528 pin controller
[brgl:pwrseq/for-next] BUILD SUCCESS d51fc9d4cd6eb18ac82913d83ecf7bd8c85f71ee
2026-08-28 12:32 UTC
[brgl:gpio/for-next] BUILD SUCCESS 3d12d02dda0917f50fcc4cdf4b54bb417f609d78
2026-08-28 11:48 UTC
[brgl:gpio/for-current] BUILD SUCCESS 16b10f64c63f78220c3b4035f1ed6cd3bdcb0b02
2026-08-28 11:47 UTC
[PATCH] pinctrl: stm32: use a raw spinlock regmap to program the EXTI mux
2026-08-28 11:17 UTC (4+ messages)
` [PATCH v3] pinctrl: stm32: program the EXTI mux from .alloc instead of .activate
[brgl:pwrseq/for-next] BUILD SUCCESS d51fc9d4cd6eb18ac82913d83ecf7bd8c85f71ee
2026-08-28 8:09 UTC
[PATCH] pinctrl: qcom: nord: Split QUP1 SE2/SE3 into lane-pair functions
2026-08-28 7:26 UTC (2+ messages)
[PATCH 00/13] HID: ft260: add UART and GPIO support, plus I2C fixes
2026-08-27 22:25 UTC (6+ messages)
[PATCH 08/13] HID: ft260: uart: add modem pins control via ioctl
2026-08-27 22:08 UTC (2+ messages)
[PATCH 10/13] HID: ft260: uart: fix active-low RTS/CTS/DTR/DSR polarity
2026-08-27 21:08 UTC (2+ messages)
[PATCH 09/13] HID: ft260: gpio: group sysfs attrs per HID interface
2026-08-27 20:50 UTC (2+ messages)
[PATCH 03/13] HID: ft260: add GPIO support on top of UART
2026-08-27 20:39 UTC (2+ messages)
[PATCH] gpiolib: return quietly from gpiod_get_direction() without .get_direction()
2026-08-27 20:12 UTC (2+ messages)
[PATCH 01/13] HID: ft260: add serial driver
2026-08-27 19:16 UTC (2+ messages)
[PATCH] pinctrl: denverton: Fix probe of MFD-created platform device
2026-08-27 19:02 UTC (3+ messages)
[PATCH v3 00/15] Add initial support for Qualcomm Kuno SoC
2026-08-27 17:01 UTC (14+ messages)
` [PATCH v3 06/15] dt-bindings: interconnect: Add Qualcomm Kuno NoC
` [PATCH v3 07/15] interconnect: qcom: Add Kuno interconnect provider driver
` [PATCH v3 09/15] pinctrl: qcom: Add Kuno pinctrl driver
` [PATCH v3 10/15] dt-bindings: clock: qcom: Add Kuno Global Clock Controller
[PATCH v4 00/15] Add initial support for Qualcomm Kuno SoC
2026-08-27 16:38 UTC (16+ messages)
` [PATCH v4 01/15] soc: qcom: geni-se: allow selection on 32-bit ARM Qualcomm SoCs
` [PATCH v4 02/15] dt-bindings: power: rpmpd: Document Kuno RPMh power domains
` [PATCH v4 03/15] pmdomain: qcom: rpmhpd: Add power domains for Kuno
` [PATCH v4 04/15] dt-bindings: clock: qcom,rpmhcc: Add Kuno RPMh clock controller
` [PATCH v4 05/15] clk: qcom: clk-rpmh: Add support for Kuno RPMh clocks
` [PATCH v4 06/15] dt-bindings: interconnect: Add Qualcomm Kuno NoC
` [PATCH v4 07/15] interconnect: qcom: Add Kuno interconnect provider driver
` [PATCH v4 08/15] dt-bindings: pinctrl: qcom: Add Kuno TLMM
` [PATCH v4 09/15] pinctrl: qcom: Add Kuno pinctrl driver
` [PATCH v4 10/15] dt-bindings: clock: qcom: Add Kuno Global Clock Controller
` [PATCH v4 11/15] clk: qcom: Add Global Clock Controller driver for Kuno
` [PATCH v4 12/15] dt-bindings: interrupt-controller: qcom,pdc: Add Kuno compatible string
` [PATCH v4 13/15] dt-bindings: firmware: qcom,scm: Document SCM on Kuno SoC
` [PATCH v4 14/15] dt-bindings: arm: qcom: Document Kuno IDP board
` [PATCH v4 15/15] ARM: dts: qcom: Add initial device tree for Kuno SoC
[PATCH v15 0/5] Enable Remote GPIO over RPMSG on i.MX Platform
2026-08-27 15:36 UTC (5+ messages)
` [PATCH v15 2/5] dt-bindings: remoteproc: imx_rproc: Add "rpmsg" subnode support
[PATCH v4 0/2] gpio: realtek-otto: add pinctrl support
2026-08-27 14:29 UTC (3+ messages)
` [PATCH v4 1/2] dt-bindings: gpio: otto-gpio: Add gpio-ranges
` [PATCH v4 2/2] gpio: realtek-otto: add pinctrl support
[PATCH] dt-bindings: Drop redundant white-space around values in <>
2026-08-27 14:14 UTC (3+ messages)
[RFC PATCH 0/9] pinctrl: sunxi: Allwinner A733 support
2026-08-27 10:10 UTC (4+ messages)
[PATCH v3 0/2] gpio: realtek-otto: add pinctrl support
2026-08-27 9:54 UTC (3+ messages)
` [PATCH v3 1/2] dt-bindings: gpio: otto-gpio: Add gpio-ranges
[PATCH] pinctrl: meson: Fix typo in s4 group name
2026-08-27 8:53 UTC (2+ messages)
[PATCH v15 00/22] media: i2c: add Maxim GMSL2/3 serializer and deserializer drivers
2026-08-27 8:45 UTC (3+ messages)
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox