Linux GPIO subsystem development
 help / color / mirror / Atom feed
 messages from 2026-11-17 20:05:31 to 2026-11-17 21:32:32 UTC [more...]

[PATCH v7 0/6] lx2160a: change the pad muxes through the RCW override
 2026-11-17 21:32 UTC  (13+ messages)
` [PATCH v7 1/6] dt-bindings: pinctrl: add the NXP LX2160A RCW pad mux
` [PATCH v7 2/6] dt-bindings: soc: fsl: layerscape-dcfg: add the LX2160A pad-mux child
` [PATCH v7 3/6] soc: fsl: guts: add the RCW override of the pad muxes
` [PATCH v7 4/6] pinctrl: freescale: add the Layerscape RCW pad-mux driver
` [PATCH v7 5/6] arm64: dts: lx2160a: describe the pad muxes as the DCFG RCW override
` [PATCH v7 6/6] arm64: dts: lx2160a: drop the I2C bus recovery of i2c6 and i2c7

[PATCH 0/5] gpio: fix IRQ handling and probe error paths in five drivers
 2026-11-17 21:22 UTC  (3+ messages)
` [PATCH 4/5] gpio: brcmstb: don't turn platform_get_irq errors into -ENOENT

[PATCH 0/2] gpio: davinci: fix probe-time IRQ setup
 2026-11-17 21:20 UTC  (5+ messages)
` [PATCH 1/2] gpio: davinci: use controller-specific MMIO for BINTEN
` [PATCH 2/2] gpio: davinci: allocate bank IRQ data before installing handlers

[PATCH 0/2] pinctrl: mediatek: Add MT8163 support
 2026-11-17 21:00 UTC  (3+ messages)
` [PATCH 1/2] dt-bindings: pinctrl: mediatek: Add MT8163
` [PATCH 2/2] pinctrl: mediatek: Add support for MT8163 pinctrl

[PATCH v6 0/5] lx2160a: change the pad muxes through the RCW override
 2026-11-17 21:02 UTC  (5+ messages)
` [PATCH v6 4/5] pinctrl: freescale: add the Layerscape RCW pad-mux driver

[PATCH v4 00/16] HID: ft260: add UART and GPIO support, plus I2C fixes
 2026-11-17 20:50 UTC  (12+ messages)
` [PATCH v4 02/16] HID: ft260: uart: fix serial driver
` [PATCH v4 03/16] HID: ft260: add GPIO support
` [PATCH v4 11/16] HID: ft260: workaround for TN_189 errata endpoint STALL after enumeration
` [PATCH v4 12/16] HID: ft260: i2c: abort in-flight transfers with STOP before reset
` [PATCH v4 13/16] HID: ft260: i2c: reject an I2C clock outside the supported range
` [PATCH v4 14/16] HID: ft260: i2c: fix i2c_reset sysfs store return value
` [PATCH v4 15/16] HID: ft260: i2c: recover a bus held by a slave
` [PATCH v4 16/16] HID: ft260: use lock guards


This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox