Re: [PATCH v5 1/2] pinctrl: Add driver for Awinic AW9523/B I2C GPIO Expander

[Linus Walleij <linus.walleij@linaro.org>]

On Mon, Jan 25, 2021 at 7:22 PM AngeloGioacchino Del Regno
<angelogioacchino.delregno@somainline.org> wrote:

> The Awinic AW9523(B) is a multi-function I2C gpio expander in a
> TQFN-24L package, featuring PWM (max 37mA per pin, or total max
> power 3.2Watts) for LED driving capability.
>
> It has two ports with 8 pins per port (for a total of 16 pins),
> configurable as either PWM with 1/256 stepping or GPIO input/output,
> 1.8V logic input; each GPIO can be configured as input or output
> independently from each other.
>
> This IC also has an internal interrupt controller, which is capable
> of generating an interrupt for each GPIO, depending on the
> configuration, and will raise an interrupt on the INTN pin to
> advertise this to an external interrupt controller.
>
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
(...)
> +static int aw9523_gpio_irq_type(struct irq_data *d, unsigned int type)
> +{
> +       switch (type) {
> +       case IRQ_TYPE_NONE:
> +       case IRQ_TYPE_EDGE_BOTH:
> +               return 0;
> +       default:
> +               return -EINVAL;
> +       };
> +}

This looks better.

> +static int aw9523_init_irq(struct aw9523 *awi, int irq)
> +{
(...)
> +       gpioirq = &awi->gpio.irq;
> +       gpioirq->chip = irqchip;
> +       gpioirq->parent_handler = NULL;
> +       gpioirq->num_parents = 0;
> +       gpioirq->parents = NULL;
> +       gpioirq->default_type = IRQ_TYPE_LEVEL_MASK;

This looks wrong. IRQ_TYPE_EDGE_BOTH?

Yours,
Linus Walleij