linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH 01/10] dt-bindings: pinctrl: qcom: create common LPASS LPI schema
@ 2023-12-08 21:55 Krzysztof Kozlowski
  2023-12-08 21:55 ` [PATCH 02/10] dt-bindings: pinctrl: qcom,qdu1000-tlmm: restrict number of interrupts Krzysztof Kozlowski
                   ` (10 more replies)
  0 siblings, 11 replies; 21+ messages in thread
From: Krzysztof Kozlowski @ 2023-12-08 21:55 UTC (permalink / raw)
  To: Bjorn Andersson, Andy Gross, Konrad Dybcio, Linus Walleij,
	Rob Herring, Krzysztof Kozlowski, Conor Dooley,
	Srinivas Kandagatla, Stephan Gerhold, Shawn Guo, Melody Olvera,
	Bartosz Golaszewski, Richard Acayan, Vinod Koul, krishna Lanka,
	Rohit Agarwal, Iskren Chernev, Martin Botka, Danila Tikhonov,
	Abel Vesa, Rajendra Nayak, linux-arm-msm, linux-gpio, devicetree,
	linux-kernel
  Cc: Krzysztof Kozlowski

Just like regular TLMM pin controllers in Qualcomm SoCs, the Low Power
Audio SubSystem (LPASS) Low Power Island (LPI) TLMM blocks share a lot
of properties, so common part can be moved to separate schema to reduce
code duplication and make reviewing easier.

Except the move of common part, this introduces effective changes:
1. To all LPASS LPI bindings: Reference pinmux-node.yaml in each pin
   muxing and configuration node, to bring definition of "function" and
   "pins" properties.

2. qcom,sc7280-lpass-lpi-pinctrl: Reference pinctrl.yaml in top leve.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../pinctrl/qcom,lpass-lpi-common.yaml        | 75 +++++++++++++++++++
 .../qcom,sc7280-lpass-lpi-pinctrl.yaml        | 49 ++----------
 .../qcom,sc8280xp-lpass-lpi-pinctrl.yaml      | 49 +-----------
 .../qcom,sm6115-lpass-lpi-pinctrl.yaml        | 48 +-----------
 .../qcom,sm8250-lpass-lpi-pinctrl.yaml        | 49 +-----------
 .../qcom,sm8350-lpass-lpi-pinctrl.yaml        | 49 +-----------
 .../qcom,sm8450-lpass-lpi-pinctrl.yaml        | 49 +-----------
 .../qcom,sm8550-lpass-lpi-pinctrl.yaml        | 49 +-----------
 .../qcom,sm8650-lpass-lpi-pinctrl.yaml        | 49 +-----------
 9 files changed, 109 insertions(+), 357 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-common.yaml

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-common.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-common.yaml
new file mode 100644
index 000000000000..3b5045730471
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-common.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,lpass-lpi-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SoC LPASS LPI TLMM Common Properties
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  Common properties for the Top Level Mode Multiplexer pin controllers in the
+  Low Power Audio SubSystem (LPASS) Low Power Island (LPI) of Qualcomm SoCs.
+
+properties:
+  gpio-controller: true
+
+  "#gpio-cells":
+    description:
+      Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+required:
+  - gpio-controller
+  - "#gpio-cells"
+  - gpio-ranges
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+additionalProperties: true
+
+$defs:
+  qcom-tlmm-state:
+    properties:
+      drive-strength:
+        enum: [2, 4, 6, 8, 10, 12, 14, 16]
+        default: 2
+        description:
+          Selects the drive strength for the specified pins, in mA.
+
+      slew-rate:
+        enum: [0, 1, 2, 3]
+        default: 0
+        description: |
+          0: No adjustments
+          1: Higher Slew rate (faster edges)
+          2: Lower Slew rate (slower edges)
+          3: Reserved (No adjustments)
+
+      bias-bus-hold: true
+      bias-pull-down: true
+      bias-pull-up: true
+      bias-disable: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    allOf:
+      - $ref: pincfg-node.yaml#
+      - $ref: pinmux-node.yaml#
+
+    additionalProperties: true
+
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml
index 00c5a00e35fc..08801cc4e476 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml
@@ -20,16 +20,6 @@ properties:
   reg:
     maxItems: 2
 
-  gpio-controller: true
-
-  "#gpio-cells":
-    description: Specifying the pin number and flags, as defined in
-      include/dt-bindings/gpio/gpio.h
-    const: 2
-
-  gpio-ranges:
-    maxItems: 1
-
 patternProperties:
   "-state$":
     oneOf:
@@ -45,7 +35,8 @@ $defs:
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: /schemas/pinctrl/pincfg-node.yaml
+    $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -68,42 +59,14 @@ $defs:
           Specify the alternative function to be configured for the specified
           pins.
 
-      drive-strength:
-        enum: [2, 4, 6, 8, 10, 12, 14, 16]
-        default: 2
-        description:
-          Selects the drive strength for the specified pins, in mA.
-
-      slew-rate:
-        enum: [0, 1, 2, 3]
-        default: 0
-        description: |
-            0: No adjustments
-            1: Higher Slew rate (faster edges)
-            2: Lower Slew rate (slower edges)
-            3: Reserved (No adjustments)
-
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-bus-hold: true
-      bias-disable: true
-      output-high: true
-      output-low: true
-
-    required:
-      - pins
-      - function
-
-    additionalProperties: false
-
 required:
   - compatible
   - reg
-  - gpio-controller
-  - "#gpio-cells"
-  - gpio-ranges
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,lpass-lpi-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml
index a9167dac9ab5..240e6d45cc95 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml
@@ -32,16 +32,6 @@ properties:
       - const: core
       - const: audio
 
-  gpio-controller: true
-
-  "#gpio-cells":
-    description: Specifying the pin number and flags, as defined in
-      include/dt-bindings/gpio/gpio.h
-    const: 2
-
-  gpio-ranges:
-    maxItems: 1
-
 patternProperties:
   "-state$":
     oneOf:
@@ -57,7 +47,8 @@ $defs:
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: /schemas/pinctrl/pincfg-node.yaml
+    $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -79,48 +70,16 @@ $defs:
           Specify the alternative function to be configured for the specified
           pins.
 
-      drive-strength:
-        enum: [2, 4, 6, 8, 10, 12, 14, 16]
-        default: 2
-        description:
-          Selects the drive strength for the specified pins, in mA.
-
-      slew-rate:
-        enum: [0, 1, 2, 3]
-        default: 0
-        description: |
-          0: No adjustments
-          1: Higher Slew rate (faster edges)
-          2: Lower Slew rate (slower edges)
-          3: Reserved (No adjustments)
-
-      bias-bus-hold: true
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-disable: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
-    required:
-      - pins
-      - function
-
-    additionalProperties: false
-
 allOf:
-  - $ref: pinctrl.yaml#
+  - $ref: qcom,lpass-lpi-common.yaml#
 
 required:
   - compatible
   - reg
   - clocks
   - clock-names
-  - gpio-controller
-  - "#gpio-cells"
-  - gpio-ranges
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml
index abac3311fc55..f4cf2ce86fcd 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml
@@ -31,16 +31,6 @@ properties:
     items:
       - const: audio
 
-  gpio-controller: true
-
-  "#gpio-cells":
-    description: Specifying the pin number and flags, as defined in
-      include/dt-bindings/gpio/gpio.h
-    const: 2
-
-  gpio-ranges:
-    maxItems: 1
-
 patternProperties:
   "-state$":
     oneOf:
@@ -56,7 +46,8 @@ $defs:
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: /schemas/pinctrl/pincfg-node.yaml
+    $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -75,48 +66,17 @@ $defs:
           Specify the alternative function to be configured for the specified
           pins.
 
-      drive-strength:
-        enum: [2, 4, 6, 8, 10, 12, 14, 16]
-        default: 2
-        description:
-          Selects the drive strength for the specified pins, in mA.
-
-      slew-rate:
-        enum: [0, 1, 2, 3]
-        default: 0
-        description: |
-          0: No adjustments
-          1: Higher Slew rate (faster edges)
-          2: Lower Slew rate (slower edges)
-          3: Reserved (No adjustments)
-
-      bias-bus-hold: true
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-disable: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
-    required:
-      - pins
-      - function
-
-    additionalProperties: false
 
 allOf:
-  - $ref: pinctrl.yaml#
+  - $ref: qcom,lpass-lpi-common.yaml#
 
 required:
   - compatible
   - reg
   - clocks
   - clock-names
-  - gpio-controller
-  - "#gpio-cells"
-  - gpio-ranges
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml
index 4b4be7efc150..750c996c10a7 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml
@@ -30,16 +30,6 @@ properties:
       - const: core
       - const: audio
 
-  gpio-controller: true
-
-  "#gpio-cells":
-    description: Specifying the pin number and flags, as defined in
-      include/dt-bindings/gpio/gpio.h
-    const: 2
-
-  gpio-ranges:
-    maxItems: 1
-
 patternProperties:
   "-state$":
     oneOf:
@@ -55,7 +45,8 @@ $defs:
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: /schemas/pinctrl/pincfg-node.yaml
+    $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -78,48 +69,16 @@ $defs:
           Specify the alternative function to be configured for the specified
           pins.
 
-      drive-strength:
-        enum: [2, 4, 6, 8, 10, 12, 14, 16]
-        default: 2
-        description:
-          Selects the drive strength for the specified pins, in mA.
-
-      slew-rate:
-        enum: [0, 1, 2, 3]
-        default: 0
-        description: |
-            0: No adjustments
-            1: Higher Slew rate (faster edges)
-            2: Lower Slew rate (slower edges)
-            3: Reserved (No adjustments)
-
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-bus-hold: true
-      bias-disable: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
-    required:
-      - pins
-      - function
-
-    additionalProperties: false
-
 allOf:
-  - $ref: pinctrl.yaml#
+  - $ref: qcom,lpass-lpi-common.yaml#
 
 required:
   - compatible
   - reg
   - clocks
   - clock-names
-  - gpio-controller
-  - "#gpio-cells"
-  - gpio-ranges
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml
index 2e65ae08dd21..9d782f910b31 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml
@@ -33,16 +33,6 @@ properties:
       - const: core
       - const: audio
 
-  gpio-controller: true
-
-  "#gpio-cells":
-    description: Specifying the pin number and flags, as defined in
-      include/dt-bindings/gpio/gpio.h
-    const: 2
-
-  gpio-ranges:
-    maxItems: 1
-
 patternProperties:
   "-state$":
     oneOf:
@@ -58,7 +48,8 @@ $defs:
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: /schemas/pinctrl/pincfg-node.yaml
+    $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -81,48 +72,16 @@ $defs:
           Specify the alternative function to be configured for the specified
           pins.
 
-      drive-strength:
-        enum: [2, 4, 6, 8, 10, 12, 14, 16]
-        default: 2
-        description:
-          Selects the drive strength for the specified pins, in mA.
-
-      slew-rate:
-        enum: [0, 1, 2, 3]
-        default: 0
-        description: |
-          0: No adjustments
-          1: Higher Slew rate (faster edges)
-          2: Lower Slew rate (slower edges)
-          3: Reserved (No adjustments)
-
-      bias-bus-hold: true
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-disable: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
-    required:
-      - pins
-      - function
-
-    additionalProperties: false
-
 allOf:
-  - $ref: pinctrl.yaml#
+  - $ref: qcom,lpass-lpi-common.yaml#
 
 required:
   - compatible
   - reg
   - clocks
   - clock-names
-  - gpio-controller
-  - "#gpio-cells"
-  - gpio-ranges
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml
index 1eefa9aa6a86..e7565592da86 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml
@@ -32,16 +32,6 @@ properties:
       - const: core
       - const: audio
 
-  gpio-controller: true
-
-  "#gpio-cells":
-    description: Specifying the pin number and flags, as defined in
-      include/dt-bindings/gpio/gpio.h
-    const: 2
-
-  gpio-ranges:
-    maxItems: 1
-
 patternProperties:
   "-state$":
     oneOf:
@@ -57,7 +47,8 @@ $defs:
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: /schemas/pinctrl/pincfg-node.yaml
+    $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -81,48 +72,16 @@ $defs:
           Specify the alternative function to be configured for the specified
           pins.
 
-      drive-strength:
-        enum: [2, 4, 6, 8, 10, 12, 14, 16]
-        default: 2
-        description:
-          Selects the drive strength for the specified pins, in mA.
-
-      slew-rate:
-        enum: [0, 1, 2, 3]
-        default: 0
-        description: |
-          0: No adjustments
-          1: Higher Slew rate (faster edges)
-          2: Lower Slew rate (slower edges)
-          3: Reserved (No adjustments)
-
-      bias-bus-hold: true
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-disable: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
-    required:
-      - pins
-      - function
-
-    additionalProperties: false
-
 allOf:
-  - $ref: pinctrl.yaml#
+  - $ref: qcom,lpass-lpi-common.yaml#
 
 required:
   - compatible
   - reg
   - clocks
   - clock-names
-  - gpio-controller
-  - "#gpio-cells"
-  - gpio-ranges
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml
index ad5e32130fd7..bf4a72facae1 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml
@@ -37,16 +37,6 @@ properties:
       - const: core
       - const: audio
 
-  gpio-controller: true
-
-  "#gpio-cells":
-    description: Specifying the pin number and flags, as defined in
-      include/dt-bindings/gpio/gpio.h
-    const: 2
-
-  gpio-ranges:
-    maxItems: 1
-
 patternProperties:
   "-state$":
     oneOf:
@@ -62,7 +52,8 @@ $defs:
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: /schemas/pinctrl/pincfg-node.yaml
+    $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -85,48 +76,16 @@ $defs:
           Specify the alternative function to be configured for the specified
           pins.
 
-      drive-strength:
-        enum: [2, 4, 6, 8, 10, 12, 14, 16]
-        default: 2
-        description:
-          Selects the drive strength for the specified pins, in mA.
-
-      slew-rate:
-        enum: [0, 1, 2, 3]
-        default: 0
-        description: |
-          0: No adjustments
-          1: Higher Slew rate (faster edges)
-          2: Lower Slew rate (slower edges)
-          3: Reserved (No adjustments)
-
-      bias-bus-hold: true
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-disable: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
-    required:
-      - pins
-      - function
-
-    additionalProperties: false
-
 allOf:
-  - $ref: pinctrl.yaml#
+  - $ref: qcom,lpass-lpi-common.yaml#
 
 required:
   - compatible
   - reg
   - clocks
   - clock-names
-  - gpio-controller
-  - "#gpio-cells"
-  - gpio-ranges
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8650-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8650-lpass-lpi-pinctrl.yaml
index f5736ed140ee..db7214362301 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8650-lpass-lpi-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8650-lpass-lpi-pinctrl.yaml
@@ -32,16 +32,6 @@ properties:
       - const: core
       - const: audio
 
-  gpio-controller: true
-
-  "#gpio-cells":
-    description: Specifying the pin number and flags, as defined in
-      include/dt-bindings/gpio/gpio.h
-    const: 2
-
-  gpio-ranges:
-    maxItems: 1
-
 patternProperties:
   "-state$":
     oneOf:
@@ -57,7 +47,8 @@ $defs:
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: /schemas/pinctrl/pincfg-node.yaml
+    $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -80,48 +71,16 @@ $defs:
           Specify the alternative function to be configured for the specified
           pins.
 
-      drive-strength:
-        enum: [2, 4, 6, 8, 10, 12, 14, 16]
-        default: 2
-        description:
-          Selects the drive strength for the specified pins, in mA.
-
-      slew-rate:
-        enum: [0, 1, 2, 3]
-        default: 0
-        description: |
-          0: No adjustments
-          1: Higher Slew rate (faster edges)
-          2: Lower Slew rate (slower edges)
-          3: Reserved (No adjustments)
-
-      bias-bus-hold: true
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-disable: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
-    required:
-      - pins
-      - function
-
-    additionalProperties: false
-
 allOf:
-  - $ref: pinctrl.yaml#
+  - $ref: qcom,lpass-lpi-common.yaml#
 
 required:
   - compatible
   - reg
   - clocks
   - clock-names
-  - gpio-controller
-  - "#gpio-cells"
-  - gpio-ranges
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 21+ messages in thread
end of thread, other threads:[~2023-12-20 11:11 UTC | newest]

Thread overview: 21+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-12-08 21:55 [PATCH 01/10] dt-bindings: pinctrl: qcom: create common LPASS LPI schema Krzysztof Kozlowski
2023-12-08 21:55 ` [PATCH 02/10] dt-bindings: pinctrl: qcom,qdu1000-tlmm: restrict number of interrupts Krzysztof Kozlowski
2023-12-13 19:01   ` Rob Herring
2023-12-08 21:55 ` [PATCH 03/10] dt-bindings: pinctrl: qcom,sa8775p-tlmm: " Krzysztof Kozlowski
2023-12-13 18:40   ` Rob Herring
2023-12-08 21:55 ` [PATCH 04/10] dt-bindings: pinctrl: qcom,sdx75-tlmm: " Krzysztof Kozlowski
2023-12-13 18:40   ` Rob Herring
2023-12-08 21:55 ` [PATCH 05/10] dt-bindings: pinctrl: qcom,sm8550-tlmm: " Krzysztof Kozlowski
2023-12-13 18:40   ` Rob Herring
2023-12-08 21:55 ` [PATCH 06/10] dt-bindings: pinctrl: qcom,sm8650-tlmm: " Krzysztof Kozlowski
2023-12-13 18:40   ` Rob Herring
2023-12-08 21:55 ` [PATCH 07/10] dt-bindings: pinctrl: qcom,x1e80100-tlmm: " Krzysztof Kozlowski
2023-12-13 18:40   ` Rob Herring
2023-12-08 21:55 ` [PATCH 08/10] dt-bindings: pinctrl: qcom,ipq5018-tlmm: use common TLMM bindings Krzysztof Kozlowski
2023-12-13 18:41   ` Rob Herring
2023-12-08 21:55 ` [PATCH 09/10] dt-bindings: pinctrl: qcom: drop common properties Krzysztof Kozlowski
2023-12-11 23:22   ` Richard Acayan
2023-12-08 21:55 ` [PATCH 10/10] dt-bindings: pinctrl: qcom: drop common properties and allow wakeup-parent Krzysztof Kozlowski
2023-12-13 18:41   ` Rob Herring
2023-12-13 18:40 ` [PATCH 01/10] dt-bindings: pinctrl: qcom: create common LPASS LPI schema Rob Herring
2023-12-20 11:11 ` Linus Walleij

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).