[PATCH v3 0/2] Add pinctrl support for SDX65

linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed

* [PATCH v3 0/2] Add pinctrl support for SDX65
@ 2021-10-30  0:03 quic_vamslank
  2021-10-30  0:03 ` [PATCH v3 1/2] dt-bindings: pinctrl: qcom: Add SDX65 pinctrl bindings quic_vamslank
                   ` (2 more replies)
  0 siblings, 3 replies; 5+ messages in thread
From: quic_vamslank @ 2021-10-30  0:03 UTC (permalink / raw)
  To: agross, bjorn.andersson, linus.walleij
  Cc: linux-arm-msm, linux-gpio, linux-kernel, manivannan.sadhasivam,
	Vamsi Krishna Lanka

From: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>

Hello,

Changes from v2:
 - Addressed comments from Bjorn
 - Collected Reviewed-by for the patches 

Changes from v1:
 - Addressed all Bjorn's comments

This patch series adds pinctrl bindings and tlmm support for SDX65.

Thanks,
Vamsi

Vamsi Krishna Lanka (2):
  dt-bindings: pinctrl: qcom: Add SDX65 pinctrl bindings
  pinctrl: qcom: Add SDX65 pincontrol driver

 .../bindings/pinctrl/qcom,sdx65-pinctrl.yaml       | 195 +++++
 drivers/pinctrl/qcom/Kconfig                       |   9 +
 drivers/pinctrl/qcom/Makefile                      |   1 +
 drivers/pinctrl/qcom/pinctrl-sdx65.c               | 967 +++++++++++++++++++++
 4 files changed, 1172 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sdx65-pinctrl.yaml
 create mode 100644 drivers/pinctrl/qcom/pinctrl-sdx65.c

-- 
2.7.4


^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH v3 1/2] dt-bindings: pinctrl: qcom: Add SDX65 pinctrl bindings
  2021-10-30  0:03 [PATCH v3 0/2] Add pinctrl support for SDX65 quic_vamslank
@ 2021-10-30  0:03 ` quic_vamslank
  2021-11-09 15:49   ` Bjorn Andersson
  2021-10-30  0:03 ` [PATCH v3 2/2] pinctrl: qcom: Add SDX65 pincontrol driver quic_vamslank
  2021-11-09 10:56 ` [PATCH v3 0/2] Add pinctrl support for SDX65 Linus Walleij
  2 siblings, 1 reply; 5+ messages in thread
From: quic_vamslank @ 2021-10-30  0:03 UTC (permalink / raw)
  To: agross, bjorn.andersson, linus.walleij
  Cc: linux-arm-msm, linux-gpio, linux-kernel, manivannan.sadhasivam,
	Vamsi Krishna Lanka

From: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>

Add device tree binding Documentation details for Qualcomm SDX65
pinctrl driver.

Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
---
 .../bindings/pinctrl/qcom,sdx65-pinctrl.yaml       | 195 +++++++++++++++++++++
 1 file changed, 195 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sdx65-pinctrl.yaml

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-pinctrl.yaml
new file mode 100644
index 0000000..589ff2f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-pinctrl.yaml
@@ -0,0 +1,195 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sdx65-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SDX65 TLMM block
+
+maintainers:
+  - Vamsi krishna Lanka <quic_vamslank@quicinc.com>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer block found in the
+  SDX65 platform.
+
+properties:
+  compatible:
+    const: qcom,sdx65-tlmm
+
+  reg:
+    description: Specifies the base address and size of the TLMM register space
+    maxItems: 1
+
+  interrupts:
+    description: Specifies the TLMM summary IRQ
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description: Specifies the PIN numbers and Flags, as defined in
+      include/dt-bindings/interrupt-controller/irq.h
+    const: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description: Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  gpio-reserved-ranges:
+    maxItems: 1
+
+#PIN CONFIGURATION NODES
+patternProperties:
+'-state$':
+    oneOf:
+      - $ref: "#/$defs/qcom-sdx65-tlmm-state"
+      - patternProperties:
+	  ".*":
+	    $ref: "#/$defs/qcom-sdx65-tlmm-state"
+'$defs':
+  qcom-sdx65-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+
+    properties:
+      pins:
+	description:
+	  List of gpio pins affected by the properties specified in this subnode.
+	items:
+	  oneOf:
+	    - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9])$"
+	    - enum: [ ufs_reset, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data, sdc1_rclk ]
+	minItems: 1
+	maxItems: 150
+
+      function:
+	description:
+	  Specify the alternative function to be configured for the specified
+	  pins. Functions are only valid for gpio pins.
+	enum: [ blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens,
+	  bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8,
+	  qdss_cti_trig_out_b, bimc_dte0, dac_calib1, qdss_cti_trig_in_b,
+	  dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10,
+	  blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0, atest_usb12,
+	  mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11,
+	  atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio, atest_char,
+	  cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8, qdss_tracedata_b,
+	  pll_reset, qdss_stm6, qdss_stm5, qdss_stm4, atest_usb2, cci_i2c,
+	  qdss_stm3, dac_calib3, atest_usb23, atest_char3, dac_calib4,
+	  qdss_stm2, atest_usb22, atest_char2, qdss_stm1, dac_calib5,
+	  atest_usb21, atest_char1, dbg_out, qdss_stm0, dac_calib6,
+	  atest_usb20, atest_char0, dac_calib10, qdss_stm10,
+	  qdss_cti_trig_in_a, cci_timer4, blsp_spi6, blsp_uart6, blsp_uim6,
+	  blsp2_spi, qdss_stm9, qdss_cti_trig_out_a, dac_calib11,
+	  qdss_stm8, cci_timer0, qdss_stm13, dac_calib7, cci_timer1,
+	  qdss_stm12, dac_calib8, cci_timer2, blsp1_spi, qdss_stm11,
+	  dac_calib9, cci_timer3, cci_async, dac_calib12, blsp_i2c6,
+	  qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14,
+	  dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem,
+	  dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto,
+	  dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0,
+	  dac_calib22, dac_calib23, dac_calib24, tsif1_sync, dac_calib25,
+	  sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2,
+	  qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3,
+	  uim3, blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9,
+	  blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7,
+	  qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11, blsp_uart11,
+	  blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a, blsp_i2c11, cri_trng0,
+	  cri_trng1, cri_trng, qdss_stm18, pri_mi2s, qdss_stm17, blsp_spi4,
+	  blsp_uart4, blsp_uim4, qdss_stm16, qdss_stm15, blsp_i2c4,
+	  qdss_stm14, dac_calib26, spkr_i2s, audio_ref, lpass_slimbus,
+	  isense_dbg, tsense_pwm1, tsense_pwm2, btfm_slimbus, ter_mi2s,
+	  qdss_stm22, qdss_stm21, qdss_stm20, qdss_stm19, gcc_gp1_clk_b,
+	  sec_mi2s, blsp_spi5, blsp_uart5, blsp_uim5, gcc_gp2_clk_b,
+	  gcc_gp3_clk_b, blsp_i2c5, blsp_spi12, blsp_uart12, blsp_uim12,
+	  qdss_stm25, qdss_stm31, blsp_i2c12, qdss_stm30, qdss_stm29,
+	  tsif1_clk, qdss_stm28, tsif1_en, tsif1_data, sdc4_cmd, qdss_stm27,
+	  qdss_traceclk_b, tsif2_error, sdc43, vfr_1, qdss_stm26, tsif2_clk,
+	  sdc4_clk, qdss_stm24, tsif2_en, sdc42, qdss_stm23, qdss_tracectl_b,
+	  sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b,
+	  ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b, blsp11_uart_rx_b,
+	  blsp11_i2c_sda_b, prng_rosc, blsp11_i2c_scl_b, uim2, uim1, uim_batt,
+	  pci_e2, pa_indicator, adsp_ext, ddr_bist, qdss_tracedata_11,
+	  qdss_tracedata_12, modem_tsync, nav_dr, nav_pps, pci_e1, gsm_tx,
+	  qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3,
+	  gpio ]
+
+      drive-strength:
+	enum: [2, 4, 6, 8, 10, 12, 14, 16]
+	default: 2
+	description:
+	  Selects the drive strength for the specified pins, in mA.
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      bias-disable: true
+
+      output-high: true
+
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+	#include <dt-bindings/interrupt-controller/arm-gic.h>
+	tlmm: pinctrl@f100000 {
+		compatible = "qcom,sdx65-tlmm";
+		reg = <0x03000000 0xdc2000>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&tlmm 0 0 109>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+
+		serial-pins {
+			pins = "gpio8", "gpio9";
+			function = "blsp_uart3";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		uart-w-subnodes-state {
+			rx {
+				pins = "gpio4";
+				function = "blsp_uart1";
+				bias-pull-up;
+			};
+
+			tx {
+				pins = "gpio5";
+				function = "blsp_uart1";
+				bias-disable;
+			};
+		};
+	};
+...
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 5+ messages in thread

* Re: [PATCH v3 1/2] dt-bindings: pinctrl: qcom: Add SDX65 pinctrl bindings
  2021-10-30  0:03 ` [PATCH v3 1/2] dt-bindings: pinctrl: qcom: Add SDX65 pinctrl bindings quic_vamslank
@ 2021-11-09 15:49   ` Bjorn Andersson
  0 siblings, 0 replies; 5+ messages in thread
From: Bjorn Andersson @ 2021-11-09 15:49 UTC (permalink / raw)
  To: quic_vamslank
  Cc: agross, linus.walleij, linux-arm-msm, linux-gpio, linux-kernel,
	manivannan.sadhasivam

On Fri 29 Oct 17:03 PDT 2021, quic_vamslank@quicinc.com wrote:

> From: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
> 
> Add device tree binding Documentation details for Qualcomm SDX65
> pinctrl driver.
> 
> Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
> ---
>  .../bindings/pinctrl/qcom,sdx65-pinctrl.yaml       | 195 +++++++++++++++++++++
>  1 file changed, 195 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sdx65-pinctrl.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-pinctrl.yaml
> new file mode 100644
> index 0000000..589ff2f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-pinctrl.yaml
> @@ -0,0 +1,195 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/qcom,sdx65-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Technologies, Inc. SDX65 TLMM block
> +
> +maintainers:
> +  - Vamsi krishna Lanka <quic_vamslank@quicinc.com>
> +
> +description: |

Nit. The '|' here denotes that the formatting of the description should
be maintaied, there's no need for that so you can safely omit it.

> +  This binding describes the Top Level Mode Multiplexer block found in the
> +  SDX65 platform.
> +
> +properties:
> +  compatible:
> +    const: qcom,sdx65-tlmm
> +
> +  reg:
> +    description: Specifies the base address and size of the TLMM register space
> +    maxItems: 1
> +
> +  interrupts:
> +    description: Specifies the TLMM summary IRQ
> +    maxItems: 1
> +
> +  interrupt-controller: true
> +
> +  '#interrupt-cells':
> +    description: Specifies the PIN numbers and Flags, as defined in
> +      include/dt-bindings/interrupt-controller/irq.h
> +    const: 2
> +
> +  gpio-controller: true
> +
> +  '#gpio-cells':
> +    description: Specifying the pin number and flags, as defined in
> +      include/dt-bindings/gpio/gpio.h
> +    const: 2
> +
> +  gpio-ranges:
> +    maxItems: 1
> +
> +  gpio-reserved-ranges:
> +    maxItems: 1
> +
> +#PIN CONFIGURATION NODES
> +patternProperties:
> +'-state$':
> +    oneOf:
> +      - $ref: "#/$defs/qcom-sdx65-tlmm-state"
> +      - patternProperties:
> +	  ".*":
> +	    $ref: "#/$defs/qcom-sdx65-tlmm-state"
> +'$defs':
> +  qcom-sdx65-tlmm-state:
> +    type: object
> +    description:
> +      Pinctrl node's client devices use subnodes for desired pin configuration.
> +      Client device subnodes use below standard properties.
> +    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
> +
> +    properties:
> +      pins:
> +	description:
> +	  List of gpio pins affected by the properties specified in this subnode.
> +	items:
> +	  oneOf:
> +	    - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9])$"
> +	    - enum: [ ufs_reset, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data, sdc1_rclk ]
> +	minItems: 1
> +	maxItems: 150
> +
> +      function:
> +	description:
> +	  Specify the alternative function to be configured for the specified
> +	  pins. Functions are only valid for gpio pins.
> +	enum: [ blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens,
> +	  bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8,
> +	  qdss_cti_trig_out_b, bimc_dte0, dac_calib1, qdss_cti_trig_in_b,
> +	  dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10,
> +	  blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0, atest_usb12,
> +	  mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11,
> +	  atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio, atest_char,
> +	  cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8, qdss_tracedata_b,
> +	  pll_reset, qdss_stm6, qdss_stm5, qdss_stm4, atest_usb2, cci_i2c,
> +	  qdss_stm3, dac_calib3, atest_usb23, atest_char3, dac_calib4,
> +	  qdss_stm2, atest_usb22, atest_char2, qdss_stm1, dac_calib5,
> +	  atest_usb21, atest_char1, dbg_out, qdss_stm0, dac_calib6,
> +	  atest_usb20, atest_char0, dac_calib10, qdss_stm10,
> +	  qdss_cti_trig_in_a, cci_timer4, blsp_spi6, blsp_uart6, blsp_uim6,
> +	  blsp2_spi, qdss_stm9, qdss_cti_trig_out_a, dac_calib11,
> +	  qdss_stm8, cci_timer0, qdss_stm13, dac_calib7, cci_timer1,
> +	  qdss_stm12, dac_calib8, cci_timer2, blsp1_spi, qdss_stm11,
> +	  dac_calib9, cci_timer3, cci_async, dac_calib12, blsp_i2c6,
> +	  qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14,
> +	  dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem,
> +	  dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto,
> +	  dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0,
> +	  dac_calib22, dac_calib23, dac_calib24, tsif1_sync, dac_calib25,
> +	  sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2,
> +	  qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3,
> +	  uim3, blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9,
> +	  blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7,
> +	  qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11, blsp_uart11,
> +	  blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a, blsp_i2c11, cri_trng0,
> +	  cri_trng1, cri_trng, qdss_stm18, pri_mi2s, qdss_stm17, blsp_spi4,
> +	  blsp_uart4, blsp_uim4, qdss_stm16, qdss_stm15, blsp_i2c4,
> +	  qdss_stm14, dac_calib26, spkr_i2s, audio_ref, lpass_slimbus,
> +	  isense_dbg, tsense_pwm1, tsense_pwm2, btfm_slimbus, ter_mi2s,
> +	  qdss_stm22, qdss_stm21, qdss_stm20, qdss_stm19, gcc_gp1_clk_b,
> +	  sec_mi2s, blsp_spi5, blsp_uart5, blsp_uim5, gcc_gp2_clk_b,
> +	  gcc_gp3_clk_b, blsp_i2c5, blsp_spi12, blsp_uart12, blsp_uim12,
> +	  qdss_stm25, qdss_stm31, blsp_i2c12, qdss_stm30, qdss_stm29,
> +	  tsif1_clk, qdss_stm28, tsif1_en, tsif1_data, sdc4_cmd, qdss_stm27,
> +	  qdss_traceclk_b, tsif2_error, sdc43, vfr_1, qdss_stm26, tsif2_clk,
> +	  sdc4_clk, qdss_stm24, tsif2_en, sdc42, qdss_stm23, qdss_tracectl_b,
> +	  sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b,
> +	  ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b, blsp11_uart_rx_b,
> +	  blsp11_i2c_sda_b, prng_rosc, blsp11_i2c_scl_b, uim2, uim1, uim_batt,
> +	  pci_e2, pa_indicator, adsp_ext, ddr_bist, qdss_tracedata_11,
> +	  qdss_tracedata_12, modem_tsync, nav_dr, nav_pps, pci_e1, gsm_tx,
> +	  qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3,
> +	  gpio ]
> +
> +      drive-strength:
> +	enum: [2, 4, 6, 8, 10, 12, 14, 16]
> +	default: 2
> +	description:
> +	  Selects the drive strength for the specified pins, in mA.
> +
> +      bias-pull-down: true
> +
> +      bias-pull-up: true
> +
> +      bias-disable: true
> +
> +      output-high: true
> +
> +      output-low: true
> +
> +    required:
> +      - pins
> +      - function
> +
> +    additionalProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - interrupt-controller
> +  - '#interrupt-cells'
> +  - gpio-controller
> +  - '#gpio-cells'
> +  - gpio-ranges
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +	#include <dt-bindings/interrupt-controller/arm-gic.h>
> +	tlmm: pinctrl@f100000 {
> +		compatible = "qcom,sdx65-tlmm";
> +		reg = <0x03000000 0xdc2000>;
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		gpio-ranges = <&tlmm 0 0 109>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +		interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
> +
> +		serial-pins {

You define the child nodes as:

patternProperties:
'-state$':

Hence this pinctrl state needs to end with the string "-state".

With that fixed, please rebase on v5.16-rc1 and add my

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> +			pins = "gpio8", "gpio9";
> +			function = "blsp_uart3";
> +			drive-strength = <2>;
> +			bias-disable;
> +		};
> +
> +		uart-w-subnodes-state {
> +			rx {
> +				pins = "gpio4";
> +				function = "blsp_uart1";
> +				bias-pull-up;
> +			};
> +
> +			tx {
> +				pins = "gpio5";
> +				function = "blsp_uart1";
> +				bias-disable;
> +			};
> +		};
> +	};
> +...
> -- 
> 2.7.4
> 

^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH v3 2/2] pinctrl: qcom: Add SDX65 pincontrol driver
  2021-10-30  0:03 [PATCH v3 0/2] Add pinctrl support for SDX65 quic_vamslank
  2021-10-30  0:03 ` [PATCH v3 1/2] dt-bindings: pinctrl: qcom: Add SDX65 pinctrl bindings quic_vamslank
@ 2021-10-30  0:03 ` quic_vamslank
  2021-11-09 10:56 ` [PATCH v3 0/2] Add pinctrl support for SDX65 Linus Walleij
  2 siblings, 0 replies; 5+ messages in thread
From: quic_vamslank @ 2021-10-30  0:03 UTC (permalink / raw)
  To: agross, bjorn.andersson, linus.walleij
  Cc: linux-arm-msm, linux-gpio, linux-kernel, manivannan.sadhasivam,
	Vamsi Krishna Lanka

From: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>

Add initial Qualcomm SDX65 pinctrl driver to support pin configuration
with pinctrl framework for SDX65 SoC.

Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 drivers/pinctrl/qcom/Kconfig         |   9 +
 drivers/pinctrl/qcom/Makefile        |   1 +
 drivers/pinctrl/qcom/pinctrl-sdx65.c | 967 +++++++++++++++++++++++++++++++++++
 3 files changed, 977 insertions(+)
 create mode 100644 drivers/pinctrl/qcom/pinctrl-sdx65.c

diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
index 5ff4207..4e7a87b 100644
--- a/drivers/pinctrl/qcom/Kconfig
+++ b/drivers/pinctrl/qcom/Kconfig
@@ -283,6 +283,15 @@ config PINCTRL_SM6125
 	 Qualcomm Technologies Inc TLMM block found on the Qualcomm
 	 Technologies Inc SM6125 platform.
 
+config PINCTRL_SDX65
+	tristate "Qualcomm Technologies Inc SDX65 pin controller driver"
+	depends on GPIOLIB && OF
+	depends on PINCTRL_MSM
+	help
+	 This is the pinctrl, pinmux, pinconf and gpiolib driver for the
+	 Qualcomm Technologies Inc TLMM block found on the Qualcomm
+	 Technologies Inc SDX65 platform.
+
 config PINCTRL_SM8150
 	tristate "Qualcomm Technologies Inc SM8150 pin controller driver"
 	depends on OF
diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile
index 7a12e8c..833511e 100644
--- a/drivers/pinctrl/qcom/Makefile
+++ b/drivers/pinctrl/qcom/Makefile
@@ -33,6 +33,7 @@ obj-$(CONFIG_PINCTRL_SDM845) += pinctrl-sdm845.o
 obj-$(CONFIG_PINCTRL_SDX55) += pinctrl-sdx55.o
 obj-$(CONFIG_PINCTRL_SM6115) += pinctrl-sm6115.o
 obj-$(CONFIG_PINCTRL_SM6125) += pinctrl-sm6125.o
+obj-$(CONFIG_PINCTRL_SDX65) += pinctrl-sdx65.o
 obj-$(CONFIG_PINCTRL_SM8150) += pinctrl-sm8150.o
 obj-$(CONFIG_PINCTRL_SM8250) += pinctrl-sm8250.o
 obj-$(CONFIG_PINCTRL_SM8350) += pinctrl-sm8350.o
diff --git a/drivers/pinctrl/qcom/pinctrl-sdx65.c b/drivers/pinctrl/qcom/pinctrl-sdx65.c
new file mode 100644
index 0000000..e793ea7
--- /dev/null
+++ b/drivers/pinctrl/qcom/pinctrl-sdx65.c
@@ -0,0 +1,967 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-msm.h"
+
+#define FUNCTION(fname)			                \
+	[msm_mux_##fname] = {		                \
+		.name = #fname,				\
+		.groups = fname##_groups,               \
+		.ngroups = ARRAY_SIZE(fname##_groups),	\
+	}
+
+#define REG_BASE 0x0
+#define REG_SIZE 0x1000
+#define PINGROUP(id, f1, f2, f3, f4, f5, f6, f7, f8, f9)	\
+	{					        \
+		.name = "gpio" #id,			\
+		.pins = gpio##id##_pins,		\
+		.npins = (unsigned int)ARRAY_SIZE(gpio##id##_pins),	\
+		.funcs = (int[]){			\
+			msm_mux_gpio, /* gpio mode */	\
+			msm_mux_##f1,			\
+			msm_mux_##f2,			\
+			msm_mux_##f3,			\
+			msm_mux_##f4,			\
+			msm_mux_##f5,			\
+			msm_mux_##f6,			\
+			msm_mux_##f7,			\
+			msm_mux_##f8,			\
+			msm_mux_##f9			\
+		},				        \
+		.nfuncs = 10,				\
+		.ctl_reg = REG_BASE + REG_SIZE * id,			\
+		.io_reg = REG_BASE + 0x4 + REG_SIZE * id,		\
+		.intr_cfg_reg = REG_BASE + 0x8 + REG_SIZE * id,		\
+		.intr_status_reg = REG_BASE + 0xc + REG_SIZE * id,	\
+		.intr_target_reg = REG_BASE + 0x8 + REG_SIZE * id,	\
+		.mux_bit = 2,			\
+		.pull_bit = 0,			\
+		.drv_bit = 6,			\
+		.oe_bit = 9,			\
+		.in_bit = 0,			\
+		.out_bit = 1,			\
+		.intr_enable_bit = 0,		\
+		.intr_status_bit = 0,		\
+		.intr_target_bit = 5,		\
+		.intr_target_kpss_val = 3,	\
+		.intr_raw_status_bit = 4,	\
+		.intr_polarity_bit = 1,		\
+		.intr_detection_bit = 2,	\
+		.intr_detection_width = 2,	\
+	}
+
+#define SDC_QDSD_PINGROUP(pg_name, ctl, pull, drv)	\
+	{					        \
+		.name = #pg_name,			\
+		.pins = pg_name##_pins,			\
+		.npins = (unsigned int)ARRAY_SIZE(pg_name##_pins),	\
+		.ctl_reg = ctl,				\
+		.io_reg = 0,				\
+		.intr_cfg_reg = 0,			\
+		.intr_status_reg = 0,			\
+		.intr_target_reg = 0,			\
+		.mux_bit = -1,				\
+		.pull_bit = pull,			\
+		.drv_bit = drv,				\
+		.oe_bit = -1,				\
+		.in_bit = -1,				\
+		.out_bit = -1,				\
+		.intr_enable_bit = -1,			\
+		.intr_status_bit = -1,			\
+		.intr_target_bit = -1,			\
+		.intr_raw_status_bit = -1,		\
+		.intr_polarity_bit = -1,		\
+		.intr_detection_bit = -1,		\
+		.intr_detection_width = -1,		\
+	}
+
+#define UFS_RESET(pg_name, offset)				\
+	{					        \
+		.name = #pg_name,			\
+		.pins = pg_name##_pins,			\
+		.npins = (unsigned int)ARRAY_SIZE(pg_name##_pins),	\
+		.ctl_reg = offset,			\
+		.io_reg = offset + 0x4,			\
+		.intr_cfg_reg = 0,			\
+		.intr_status_reg = 0,			\
+		.intr_target_reg = 0,			\
+		.mux_bit = -1,				\
+		.pull_bit = 3,				\
+		.drv_bit = 0,				\
+		.oe_bit = -1,				\
+		.in_bit = -1,				\
+		.out_bit = 0,				\
+		.intr_enable_bit = -1,			\
+		.intr_status_bit = -1,			\
+		.intr_target_bit = -1,			\
+		.intr_raw_status_bit = -1,		\
+		.intr_polarity_bit = -1,		\
+		.intr_detection_bit = -1,		\
+		.intr_detection_width = -1,		\
+	}
+
+static const struct pinctrl_pin_desc sdx65_pins[] = {
+	PINCTRL_PIN(0, "GPIO_0"),
+	PINCTRL_PIN(1, "GPIO_1"),
+	PINCTRL_PIN(2, "GPIO_2"),
+	PINCTRL_PIN(3, "GPIO_3"),
+	PINCTRL_PIN(4, "GPIO_4"),
+	PINCTRL_PIN(5, "GPIO_5"),
+	PINCTRL_PIN(6, "GPIO_6"),
+	PINCTRL_PIN(7, "GPIO_7"),
+	PINCTRL_PIN(8, "GPIO_8"),
+	PINCTRL_PIN(9, "GPIO_9"),
+	PINCTRL_PIN(10, "GPIO_10"),
+	PINCTRL_PIN(11, "GPIO_11"),
+	PINCTRL_PIN(12, "GPIO_12"),
+	PINCTRL_PIN(13, "GPIO_13"),
+	PINCTRL_PIN(14, "GPIO_14"),
+	PINCTRL_PIN(15, "GPIO_15"),
+	PINCTRL_PIN(16, "GPIO_16"),
+	PINCTRL_PIN(17, "GPIO_17"),
+	PINCTRL_PIN(18, "GPIO_18"),
+	PINCTRL_PIN(19, "GPIO_19"),
+	PINCTRL_PIN(20, "GPIO_20"),
+	PINCTRL_PIN(21, "GPIO_21"),
+	PINCTRL_PIN(22, "GPIO_22"),
+	PINCTRL_PIN(23, "GPIO_23"),
+	PINCTRL_PIN(24, "GPIO_24"),
+	PINCTRL_PIN(25, "GPIO_25"),
+	PINCTRL_PIN(26, "GPIO_26"),
+	PINCTRL_PIN(27, "GPIO_27"),
+	PINCTRL_PIN(28, "GPIO_28"),
+	PINCTRL_PIN(29, "GPIO_29"),
+	PINCTRL_PIN(30, "GPIO_30"),
+	PINCTRL_PIN(31, "GPIO_31"),
+	PINCTRL_PIN(32, "GPIO_32"),
+	PINCTRL_PIN(33, "GPIO_33"),
+	PINCTRL_PIN(34, "GPIO_34"),
+	PINCTRL_PIN(35, "GPIO_35"),
+	PINCTRL_PIN(36, "GPIO_36"),
+	PINCTRL_PIN(37, "GPIO_37"),
+	PINCTRL_PIN(38, "GPIO_38"),
+	PINCTRL_PIN(39, "GPIO_39"),
+	PINCTRL_PIN(40, "GPIO_40"),
+	PINCTRL_PIN(41, "GPIO_41"),
+	PINCTRL_PIN(42, "GPIO_42"),
+	PINCTRL_PIN(43, "GPIO_43"),
+	PINCTRL_PIN(44, "GPIO_44"),
+	PINCTRL_PIN(45, "GPIO_45"),
+	PINCTRL_PIN(46, "GPIO_46"),
+	PINCTRL_PIN(47, "GPIO_47"),
+	PINCTRL_PIN(48, "GPIO_48"),
+	PINCTRL_PIN(49, "GPIO_49"),
+	PINCTRL_PIN(50, "GPIO_50"),
+	PINCTRL_PIN(51, "GPIO_51"),
+	PINCTRL_PIN(52, "GPIO_52"),
+	PINCTRL_PIN(53, "GPIO_53"),
+	PINCTRL_PIN(54, "GPIO_54"),
+	PINCTRL_PIN(55, "GPIO_55"),
+	PINCTRL_PIN(56, "GPIO_56"),
+	PINCTRL_PIN(57, "GPIO_57"),
+	PINCTRL_PIN(58, "GPIO_58"),
+	PINCTRL_PIN(59, "GPIO_59"),
+	PINCTRL_PIN(60, "GPIO_60"),
+	PINCTRL_PIN(61, "GPIO_61"),
+	PINCTRL_PIN(62, "GPIO_62"),
+	PINCTRL_PIN(63, "GPIO_63"),
+	PINCTRL_PIN(64, "GPIO_64"),
+	PINCTRL_PIN(65, "GPIO_65"),
+	PINCTRL_PIN(66, "GPIO_66"),
+	PINCTRL_PIN(67, "GPIO_67"),
+	PINCTRL_PIN(68, "GPIO_68"),
+	PINCTRL_PIN(69, "GPIO_69"),
+	PINCTRL_PIN(70, "GPIO_70"),
+	PINCTRL_PIN(71, "GPIO_71"),
+	PINCTRL_PIN(72, "GPIO_72"),
+	PINCTRL_PIN(73, "GPIO_73"),
+	PINCTRL_PIN(74, "GPIO_74"),
+	PINCTRL_PIN(75, "GPIO_75"),
+	PINCTRL_PIN(76, "GPIO_76"),
+	PINCTRL_PIN(77, "GPIO_77"),
+	PINCTRL_PIN(78, "GPIO_78"),
+	PINCTRL_PIN(79, "GPIO_79"),
+	PINCTRL_PIN(80, "GPIO_80"),
+	PINCTRL_PIN(81, "GPIO_81"),
+	PINCTRL_PIN(82, "GPIO_82"),
+	PINCTRL_PIN(83, "GPIO_83"),
+	PINCTRL_PIN(84, "GPIO_84"),
+	PINCTRL_PIN(85, "GPIO_85"),
+	PINCTRL_PIN(86, "GPIO_86"),
+	PINCTRL_PIN(87, "GPIO_87"),
+	PINCTRL_PIN(88, "GPIO_88"),
+	PINCTRL_PIN(89, "GPIO_89"),
+	PINCTRL_PIN(90, "GPIO_90"),
+	PINCTRL_PIN(91, "GPIO_91"),
+	PINCTRL_PIN(92, "GPIO_92"),
+	PINCTRL_PIN(93, "GPIO_93"),
+	PINCTRL_PIN(94, "GPIO_94"),
+	PINCTRL_PIN(95, "GPIO_95"),
+	PINCTRL_PIN(96, "GPIO_96"),
+	PINCTRL_PIN(97, "GPIO_97"),
+	PINCTRL_PIN(98, "GPIO_98"),
+	PINCTRL_PIN(99, "GPIO_99"),
+	PINCTRL_PIN(100, "GPIO_100"),
+	PINCTRL_PIN(101, "GPIO_101"),
+	PINCTRL_PIN(102, "GPIO_102"),
+	PINCTRL_PIN(103, "GPIO_103"),
+	PINCTRL_PIN(104, "GPIO_104"),
+	PINCTRL_PIN(105, "GPIO_105"),
+	PINCTRL_PIN(106, "GPIO_106"),
+	PINCTRL_PIN(107, "GPIO_107"),
+	PINCTRL_PIN(108, "UFS_RESET"),
+	PINCTRL_PIN(109, "SDC1_RCLK"),
+	PINCTRL_PIN(110, "SDC1_CLK"),
+	PINCTRL_PIN(111, "SDC1_CMD"),
+	PINCTRL_PIN(112, "SDC1_DATA"),
+};
+
+#define DECLARE_MSM_GPIO_PINS(pin) \
+	static const unsigned int gpio##pin##_pins[] = { pin }
+DECLARE_MSM_GPIO_PINS(0);
+DECLARE_MSM_GPIO_PINS(1);
+DECLARE_MSM_GPIO_PINS(2);
+DECLARE_MSM_GPIO_PINS(3);
+DECLARE_MSM_GPIO_PINS(4);
+DECLARE_MSM_GPIO_PINS(5);
+DECLARE_MSM_GPIO_PINS(6);
+DECLARE_MSM_GPIO_PINS(7);
+DECLARE_MSM_GPIO_PINS(8);
+DECLARE_MSM_GPIO_PINS(9);
+DECLARE_MSM_GPIO_PINS(10);
+DECLARE_MSM_GPIO_PINS(11);
+DECLARE_MSM_GPIO_PINS(12);
+DECLARE_MSM_GPIO_PINS(13);
+DECLARE_MSM_GPIO_PINS(14);
+DECLARE_MSM_GPIO_PINS(15);
+DECLARE_MSM_GPIO_PINS(16);
+DECLARE_MSM_GPIO_PINS(17);
+DECLARE_MSM_GPIO_PINS(18);
+DECLARE_MSM_GPIO_PINS(19);
+DECLARE_MSM_GPIO_PINS(20);
+DECLARE_MSM_GPIO_PINS(21);
+DECLARE_MSM_GPIO_PINS(22);
+DECLARE_MSM_GPIO_PINS(23);
+DECLARE_MSM_GPIO_PINS(24);
+DECLARE_MSM_GPIO_PINS(25);
+DECLARE_MSM_GPIO_PINS(26);
+DECLARE_MSM_GPIO_PINS(27);
+DECLARE_MSM_GPIO_PINS(28);
+DECLARE_MSM_GPIO_PINS(29);
+DECLARE_MSM_GPIO_PINS(30);
+DECLARE_MSM_GPIO_PINS(31);
+DECLARE_MSM_GPIO_PINS(32);
+DECLARE_MSM_GPIO_PINS(33);
+DECLARE_MSM_GPIO_PINS(34);
+DECLARE_MSM_GPIO_PINS(35);
+DECLARE_MSM_GPIO_PINS(36);
+DECLARE_MSM_GPIO_PINS(37);
+DECLARE_MSM_GPIO_PINS(38);
+DECLARE_MSM_GPIO_PINS(39);
+DECLARE_MSM_GPIO_PINS(40);
+DECLARE_MSM_GPIO_PINS(41);
+DECLARE_MSM_GPIO_PINS(42);
+DECLARE_MSM_GPIO_PINS(43);
+DECLARE_MSM_GPIO_PINS(44);
+DECLARE_MSM_GPIO_PINS(45);
+DECLARE_MSM_GPIO_PINS(46);
+DECLARE_MSM_GPIO_PINS(47);
+DECLARE_MSM_GPIO_PINS(48);
+DECLARE_MSM_GPIO_PINS(49);
+DECLARE_MSM_GPIO_PINS(50);
+DECLARE_MSM_GPIO_PINS(51);
+DECLARE_MSM_GPIO_PINS(52);
+DECLARE_MSM_GPIO_PINS(53);
+DECLARE_MSM_GPIO_PINS(54);
+DECLARE_MSM_GPIO_PINS(55);
+DECLARE_MSM_GPIO_PINS(56);
+DECLARE_MSM_GPIO_PINS(57);
+DECLARE_MSM_GPIO_PINS(58);
+DECLARE_MSM_GPIO_PINS(59);
+DECLARE_MSM_GPIO_PINS(60);
+DECLARE_MSM_GPIO_PINS(61);
+DECLARE_MSM_GPIO_PINS(62);
+DECLARE_MSM_GPIO_PINS(63);
+DECLARE_MSM_GPIO_PINS(64);
+DECLARE_MSM_GPIO_PINS(65);
+DECLARE_MSM_GPIO_PINS(66);
+DECLARE_MSM_GPIO_PINS(67);
+DECLARE_MSM_GPIO_PINS(68);
+DECLARE_MSM_GPIO_PINS(69);
+DECLARE_MSM_GPIO_PINS(70);
+DECLARE_MSM_GPIO_PINS(71);
+DECLARE_MSM_GPIO_PINS(72);
+DECLARE_MSM_GPIO_PINS(73);
+DECLARE_MSM_GPIO_PINS(74);
+DECLARE_MSM_GPIO_PINS(75);
+DECLARE_MSM_GPIO_PINS(76);
+DECLARE_MSM_GPIO_PINS(77);
+DECLARE_MSM_GPIO_PINS(78);
+DECLARE_MSM_GPIO_PINS(79);
+DECLARE_MSM_GPIO_PINS(80);
+DECLARE_MSM_GPIO_PINS(81);
+DECLARE_MSM_GPIO_PINS(82);
+DECLARE_MSM_GPIO_PINS(83);
+DECLARE_MSM_GPIO_PINS(84);
+DECLARE_MSM_GPIO_PINS(85);
+DECLARE_MSM_GPIO_PINS(86);
+DECLARE_MSM_GPIO_PINS(87);
+DECLARE_MSM_GPIO_PINS(88);
+DECLARE_MSM_GPIO_PINS(89);
+DECLARE_MSM_GPIO_PINS(90);
+DECLARE_MSM_GPIO_PINS(91);
+DECLARE_MSM_GPIO_PINS(92);
+DECLARE_MSM_GPIO_PINS(93);
+DECLARE_MSM_GPIO_PINS(94);
+DECLARE_MSM_GPIO_PINS(95);
+DECLARE_MSM_GPIO_PINS(96);
+DECLARE_MSM_GPIO_PINS(97);
+DECLARE_MSM_GPIO_PINS(98);
+DECLARE_MSM_GPIO_PINS(99);
+DECLARE_MSM_GPIO_PINS(100);
+DECLARE_MSM_GPIO_PINS(101);
+DECLARE_MSM_GPIO_PINS(102);
+DECLARE_MSM_GPIO_PINS(103);
+DECLARE_MSM_GPIO_PINS(104);
+DECLARE_MSM_GPIO_PINS(105);
+DECLARE_MSM_GPIO_PINS(106);
+DECLARE_MSM_GPIO_PINS(107);
+
+static const unsigned int ufs_reset_pins[] = { 108 };
+static const unsigned int sdc1_rclk_pins[] = { 109 };
+static const unsigned int sdc1_clk_pins[] = { 110 };
+static const unsigned int sdc1_cmd_pins[] = { 111 };
+static const unsigned int sdc1_data_pins[] = { 112 };
+
+enum sdx65_functions {
+	msm_mux_qlink0_wmss,
+	msm_mux_adsp_ext,
+	msm_mux_atest_char,
+	msm_mux_atest_char0,
+	msm_mux_atest_char1,
+	msm_mux_atest_char2,
+	msm_mux_atest_char3,
+	msm_mux_audio_ref,
+	msm_mux_bimc_dte0,
+	msm_mux_bimc_dte1,
+	msm_mux_blsp_i2c1,
+	msm_mux_blsp_i2c2,
+	msm_mux_blsp_i2c3,
+	msm_mux_blsp_i2c4,
+	msm_mux_blsp_spi1,
+	msm_mux_blsp_spi2,
+	msm_mux_blsp_spi3,
+	msm_mux_blsp_spi4,
+	msm_mux_blsp_uart1,
+	msm_mux_blsp_uart2,
+	msm_mux_blsp_uart3,
+	msm_mux_blsp_uart4,
+	msm_mux_char_exec,
+	msm_mux_coex_uart,
+	msm_mux_coex_uart2,
+	msm_mux_cri_trng,
+	msm_mux_cri_trng0,
+	msm_mux_cri_trng1,
+	msm_mux_dbg_out,
+	msm_mux_ddr_bist,
+	msm_mux_ddr_pxi0,
+	msm_mux_ebi0_wrcdc,
+	msm_mux_ebi2_a,
+	msm_mux_ebi2_lcd,
+	msm_mux_ext_dbg,
+	msm_mux_gcc_gp1,
+	msm_mux_gcc_gp2,
+	msm_mux_gcc_gp3,
+	msm_mux_gcc_plltest,
+	msm_mux_gpio,
+	msm_mux_i2s_mclk,
+	msm_mux_jitter_bist,
+	msm_mux_ldo_en,
+	msm_mux_ldo_update,
+	msm_mux_m_voc,
+	msm_mux_mgpi_clk,
+	msm_mux_native_char,
+	msm_mux_native_tsens,
+	msm_mux_native_tsense,
+	msm_mux_nav_gpio,
+	msm_mux_pa_indicator,
+	msm_mux_pci_e,
+	msm_mux_pcie_clkreq,
+	msm_mux_pll_bist,
+	msm_mux_pll_ref,
+	msm_mux_pri_mi2s,
+	msm_mux_pri_mi2s_ws,
+	msm_mux_prng_rosc,
+	msm_mux_qdss_cti,
+	msm_mux_qdss_gpio,
+	msm_mux_qlink0_en,
+	msm_mux_qlink0_req,
+	msm_mux_qlink1_en,
+	msm_mux_qlink1_req,
+	msm_mux_qlink1_wmss,
+	msm_mux_qlink2_en,
+	msm_mux_qlink2_req,
+	msm_mux_qlink2_wmss,
+	msm_mux_sdc1_tb,
+	msm_mux_sec_mi2s,
+	msm_mux_spmi_coex,
+	msm_mux_spmi_vgi,
+	msm_mux_tgu_ch0,
+	msm_mux_uim1_clk,
+	msm_mux_uim1_data,
+	msm_mux_uim1_present,
+	msm_mux_uim1_reset,
+	msm_mux_uim2_clk,
+	msm_mux_uim2_data,
+	msm_mux_uim2_present,
+	msm_mux_uim2_reset,
+	msm_mux_usb2phy_ac,
+	msm_mux_vsense_trigger,
+	msm_mux__,
+};
+
+static const char * const gpio_groups[] = {
+	"gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7",
+	"gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14",
+	"gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21",
+	"gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28",
+	"gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35",
+	"gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42",
+	"gpio43", "gpio44", "gpio45", "gpio46", "gpio47", "gpio48", "gpio49",
+	"gpio50", "gpio51", "gpio52", "gpio53", "gpio54", "gpio55", "gpio56",
+	"gpio57", "gpio58", "gpio59", "gpio60", "gpio61", "gpio62", "gpio63",
+	"gpio64", "gpio65", "gpio66", "gpio67", "gpio68", "gpio69", "gpio70",
+	"gpio71", "gpio72", "gpio73", "gpio74", "gpio75", "gpio76", "gpio77",
+	"gpio78", "gpio79", "gpio80", "gpio81", "gpio82", "gpio83", "gpio84",
+	"gpio85", "gpio86", "gpio87", "gpio88", "gpio89", "gpio90", "gpio91",
+	"gpio92", "gpio93", "gpio94", "gpio95", "gpio96", "gpio97", "gpio98",
+	"gpio99", "gpio100", "gpio101", "gpio102", "gpio103", "gpio104",
+	"gpio105", "gpio106", "gpio107",
+};
+static const char * const uim2_data_groups[] = {
+	"gpio0",
+};
+static const char * const blsp_uart1_groups[] = {
+	"gpio0", "gpio1", "gpio2", "gpio3", "gpio48", "gpio49", "gpio80",
+	"gpio81",
+};
+static const char * const ebi0_wrcdc_groups[] = {
+	"gpio0", "gpio2",
+};
+static const char * const uim2_present_groups[] = {
+	"gpio1",
+};
+static const char * const uim2_reset_groups[] = {
+	"gpio2",
+};
+static const char * const blsp_i2c1_groups[] = {
+	"gpio2", "gpio3", "gpio82", "gpio83",
+};
+static const char * const uim2_clk_groups[] = {
+	"gpio3",
+};
+static const char * const blsp_spi2_groups[] = {
+	"gpio4", "gpio5", "gpio6", "gpio7", "gpio23", "gpio47", "gpio62",
+};
+static const char * const blsp_uart2_groups[] = {
+	"gpio4", "gpio5", "gpio6", "gpio7", "gpio63", "gpio64", "gpio65",
+	"gpio66",
+};
+static const char * const blsp_i2c2_groups[] = {
+	"gpio6", "gpio7", "gpio65", "gpio66",
+};
+static const char * const char_exec_groups[] = {
+	"gpio6", "gpio7",
+};
+static const char * const qdss_gpio_groups[] = {
+	"gpio4", "gpio5", "gpio6", "gpio7", "gpio12", "gpio13",
+	"gpio14", "gpio15", "gpio16", "gpio17", "gpio18", "gpio19",
+	"gpio33", "gpio42", "gpio63", "gpio64", "gpio65", "gpio66",
+};
+static const char * const blsp_spi3_groups[] = {
+	"gpio8", "gpio9", "gpio10", "gpio11", "gpio23", "gpio47", "gpio62",
+};
+static const char * const blsp_uart3_groups[] = {
+	"gpio8", "gpio9", "gpio10", "gpio11",
+};
+static const char * const ext_dbg_groups[] = {
+	"gpio8", "gpio9", "gpio10", "gpio11",
+};
+static const char * const ldo_en_groups[] = {
+	"gpio8",
+};
+static const char * const blsp_i2c3_groups[] = {
+	"gpio10", "gpio11",
+};
+static const char * const gcc_gp3_groups[] = {
+	"gpio11",
+};
+static const char * const pri_mi2s_ws_groups[] = {
+	"gpio12",
+};
+static const char * const pri_mi2s_groups[] = {
+	"gpio13", "gpio14", "gpio15",
+};
+static const char * const vsense_trigger_groups[] = {
+	"gpio13",
+};
+static const char * const native_tsens_groups[] = {
+	"gpio14",
+};
+static const char * const bimc_dte0_groups[] = {
+	"gpio14", "gpio59",
+};
+static const char * const bimc_dte1_groups[] = {
+	"gpio15", "gpio61",
+};
+static const char * const sec_mi2s_groups[] = {
+	"gpio16", "gpio17", "gpio18", "gpio19",
+};
+static const char * const blsp_spi4_groups[] = {
+	"gpio16", "gpio17", "gpio18", "gpio19", "gpio23", "gpio47", "gpio62",
+};
+static const char * const blsp_uart4_groups[] = {
+	"gpio16", "gpio17", "gpio18", "gpio19", "gpio22", "gpio23", "gpio48",
+	"gpio49",
+};
+static const char * const qdss_cti_groups[] = {
+	"gpio16", "gpio16", "gpio17", "gpio17", "gpio54", "gpio54", "gpio55",
+	"gpio55", "gpio59", "gpio60", "gpio65", "gpio65", "gpio66", "gpio66",
+	"gpio94", "gpio94", "gpio95", "gpio95",
+};
+static const char * const blsp_i2c4_groups[] = {
+	"gpio18", "gpio19", "gpio84", "gpio85",
+};
+static const char * const gcc_gp1_groups[] = {
+	"gpio18",
+};
+static const char * const jitter_bist_groups[] = {
+	"gpio19",
+};
+static const char * const gcc_gp2_groups[] = {
+	"gpio19",
+};
+static const char * const pll_bist_groups[] = {
+	"gpio22",
+};
+static const char * const blsp_spi1_groups[] = {
+	"gpio23", "gpio47", "gpio62", "gpio80", "gpio81", "gpio82", "gpio83",
+};
+static const char * const adsp_ext_groups[] = {
+	"gpio24", "gpio25",
+};
+static const char * const qlink0_wmss_groups[] = {
+	"gpio28",
+};
+static const char * const native_tsense_groups[] = {
+	"gpio29", "gpio72",
+};
+static const char * const nav_gpio_groups[] = {
+	"gpio31", "gpio32",
+};
+static const char * const pll_ref_groups[] = {
+	"gpio32",
+};
+static const char * const pa_indicator_groups[] = {
+	"gpio33",
+};
+static const char * const qlink0_en_groups[] = {
+	"gpio34",
+};
+static const char * const qlink0_req_groups[] = {
+	"gpio35",
+};
+static const char * const dbg_out_groups[] = {
+	"gpio35",
+};
+static const char * const cri_trng_groups[] = {
+	"gpio36",
+};
+static const char * const prng_rosc_groups[] = {
+	"gpio38",
+};
+static const char * const cri_trng0_groups[] = {
+	"gpio40",
+};
+static const char * const cri_trng1_groups[] = {
+	"gpio41",
+};
+static const char * const coex_uart_groups[] = {
+	"gpio44", "gpio45",
+};
+static const char * const ddr_pxi0_groups[] = {
+	"gpio45", "gpio46",
+};
+static const char * const m_voc_groups[] = {
+	"gpio46", "gpio48", "gpio49", "gpio59", "gpio60",
+};
+static const char * const ddr_bist_groups[] = {
+	"gpio46", "gpio47", "gpio48", "gpio49",
+};
+static const char * const pci_e_groups[] = {
+	"gpio53",
+};
+static const char * const tgu_ch0_groups[] = {
+	"gpio55",
+};
+static const char * const pcie_clkreq_groups[] = {
+	"gpio56",
+};
+static const char * const native_char_groups[] = {
+	"gpio26", "gpio29", "gpio33", "gpio42", "gpio57",
+};
+static const char * const mgpi_clk_groups[] = {
+	"gpio61", "gpio71",
+};
+static const char * const qlink2_wmss_groups[] = {
+	"gpio61",
+};
+static const char * const i2s_mclk_groups[] = {
+	"gpio62",
+};
+static const char * const audio_ref_groups[] = {
+	"gpio62",
+};
+static const char * const ldo_update_groups[] = {
+	"gpio62",
+};
+static const char * const atest_char_groups[] = {
+	"gpio63",
+};
+static const char * const atest_char3_groups[] = {
+	"gpio64",
+};
+static const char * const atest_char2_groups[] = {
+	"gpio65",
+};
+static const char * const atest_char1_groups[] = {
+	"gpio66",
+};
+static const char * const uim1_data_groups[] = {
+	"gpio67",
+};
+static const char * const atest_char0_groups[] = {
+	"gpio67",
+};
+static const char * const uim1_present_groups[] = {
+	"gpio68",
+};
+static const char * const uim1_reset_groups[] = {
+	"gpio69",
+};
+static const char * const uim1_clk_groups[] = {
+	"gpio70",
+};
+static const char * const qlink2_en_groups[] = {
+	"gpio71",
+};
+static const char * const qlink1_en_groups[] = {
+	"gpio72",
+};
+static const char * const qlink1_req_groups[] = {
+	"gpio73",
+};
+static const char * const qlink1_wmss_groups[] = {
+	"gpio74",
+};
+static const char * const coex_uart2_groups[] = {
+	"gpio75", "gpio76", "gpio102", "gpio103",
+};
+static const char * const spmi_coex_groups[] = {
+	"gpio75", "gpio76",
+};
+static const char * const qlink2_req_groups[] = {
+	"gpio77",
+};
+static const char * const spmi_vgi_groups[] = {
+	"gpio78", "gpio79",
+};
+static const char * const gcc_plltest_groups[] = {
+	"gpio81", "gpio82",
+};
+static const char * const ebi2_lcd_groups[] = {
+	"gpio84", "gpio85", "gpio90",
+};
+static const char * const ebi2_a_groups[] = {
+	"gpio89",
+};
+static const char * const usb2phy_ac_groups[] = {
+	"gpio93",
+};
+static const char * const sdc1_tb_groups[] = {
+	"gpio106",
+};
+
+static const struct msm_function sdx65_functions[] = {
+	FUNCTION(qlink0_wmss),
+	FUNCTION(adsp_ext),
+	FUNCTION(atest_char),
+	FUNCTION(atest_char0),
+	FUNCTION(atest_char1),
+	FUNCTION(atest_char2),
+	FUNCTION(atest_char3),
+	FUNCTION(audio_ref),
+	FUNCTION(bimc_dte0),
+	FUNCTION(bimc_dte1),
+	FUNCTION(blsp_i2c1),
+	FUNCTION(blsp_i2c2),
+	FUNCTION(blsp_i2c3),
+	FUNCTION(blsp_i2c4),
+	FUNCTION(blsp_spi1),
+	FUNCTION(blsp_spi2),
+	FUNCTION(blsp_spi3),
+	FUNCTION(blsp_spi4),
+	FUNCTION(blsp_uart1),
+	FUNCTION(blsp_uart2),
+	FUNCTION(blsp_uart3),
+	FUNCTION(blsp_uart4),
+	FUNCTION(char_exec),
+	FUNCTION(coex_uart),
+	FUNCTION(coex_uart2),
+	FUNCTION(cri_trng),
+	FUNCTION(cri_trng0),
+	FUNCTION(cri_trng1),
+	FUNCTION(dbg_out),
+	FUNCTION(ddr_bist),
+	FUNCTION(ddr_pxi0),
+	FUNCTION(ebi0_wrcdc),
+	FUNCTION(ebi2_a),
+	FUNCTION(ebi2_lcd),
+	FUNCTION(ext_dbg),
+	FUNCTION(gcc_gp1),
+	FUNCTION(gcc_gp2),
+	FUNCTION(gcc_gp3),
+	FUNCTION(gcc_plltest),
+	FUNCTION(gpio),
+	FUNCTION(i2s_mclk),
+	FUNCTION(jitter_bist),
+	FUNCTION(ldo_en),
+	FUNCTION(ldo_update),
+	FUNCTION(m_voc),
+	FUNCTION(mgpi_clk),
+	FUNCTION(native_char),
+	FUNCTION(native_tsens),
+	FUNCTION(native_tsense),
+	FUNCTION(nav_gpio),
+	FUNCTION(pa_indicator),
+	FUNCTION(pci_e),
+	FUNCTION(pcie_clkreq),
+	FUNCTION(pll_bist),
+	FUNCTION(pll_ref),
+	FUNCTION(pri_mi2s),
+	FUNCTION(pri_mi2s_ws),
+	FUNCTION(prng_rosc),
+	FUNCTION(qdss_cti),
+	FUNCTION(qdss_gpio),
+	FUNCTION(qlink0_en),
+	FUNCTION(qlink0_req),
+	FUNCTION(qlink1_en),
+	FUNCTION(qlink1_req),
+	FUNCTION(qlink1_wmss),
+	FUNCTION(qlink2_en),
+	FUNCTION(qlink2_req),
+	FUNCTION(qlink2_wmss),
+	FUNCTION(sdc1_tb),
+	FUNCTION(sec_mi2s),
+	FUNCTION(spmi_coex),
+	FUNCTION(spmi_vgi),
+	FUNCTION(tgu_ch0),
+	FUNCTION(uim1_clk),
+	FUNCTION(uim1_data),
+	FUNCTION(uim1_present),
+	FUNCTION(uim1_reset),
+	FUNCTION(uim2_clk),
+	FUNCTION(uim2_data),
+	FUNCTION(uim2_present),
+	FUNCTION(uim2_reset),
+	FUNCTION(usb2phy_ac),
+	FUNCTION(vsense_trigger),
+};
+
+/* Every pin is maintained as a single group, and missing or non-existing pin
+ * would be maintained as dummy group to synchronize pin group index with
+ * pin descriptor registered with pinctrl core.
+ * Clients would not be able to request these dummy pin groups.
+ */
+static const struct msm_pingroup sdx65_groups[] = {
+	[0] = PINGROUP(0, uim2_data, blsp_uart1, ebi0_wrcdc, _, _, _, _, _, _),
+	[1] = PINGROUP(1, uim2_present, blsp_uart1, _, _, _, _, _, _, _),
+	[2] = PINGROUP(2, uim2_reset, blsp_uart1, blsp_i2c1, ebi0_wrcdc, _, _, _, _, _),
+	[3] = PINGROUP(3, uim2_clk, blsp_uart1, blsp_i2c1, _, _, _, _, _, _),
+	[4] = PINGROUP(4, blsp_spi2, blsp_uart2, _, qdss_gpio, _, _, _, _, _),
+	[5] = PINGROUP(5, blsp_spi2, blsp_uart2, _, qdss_gpio, _, _, _, _, _),
+	[6] = PINGROUP(6, blsp_spi2, blsp_uart2, blsp_i2c2, char_exec, _, qdss_gpio, _, _, _),
+	[7] = PINGROUP(7, blsp_spi2, blsp_uart2, blsp_i2c2, char_exec, _, qdss_gpio, _, _, _),
+	[8] = PINGROUP(8, blsp_spi3, blsp_uart3, ext_dbg, ldo_en, _, _, _, _, _),
+	[9] = PINGROUP(9, blsp_spi3, blsp_uart3, ext_dbg, _, _, _, _, _, _),
+	[10] = PINGROUP(10, blsp_spi3, blsp_uart3, blsp_i2c3, ext_dbg, _, _, _, _, _),
+	[11] = PINGROUP(11, blsp_spi3, blsp_uart3, blsp_i2c3, ext_dbg, gcc_gp3, _, _, _, _),
+	[12] = PINGROUP(12, pri_mi2s_ws, _, qdss_gpio, _, _, _, _, _, _),
+	[13] = PINGROUP(13, pri_mi2s, _, qdss_gpio, vsense_trigger, _, _, _, _, _),
+	[14] = PINGROUP(14, pri_mi2s, _, _, qdss_gpio, native_tsens, bimc_dte0, _, _, _),
+	[15] = PINGROUP(15, pri_mi2s, _, _, qdss_gpio, bimc_dte1, _, _, _, _),
+	[16] = PINGROUP(16, sec_mi2s, blsp_spi4, blsp_uart4, qdss_cti, qdss_cti, _, _, qdss_gpio, _),
+	[17] = PINGROUP(17, sec_mi2s, blsp_spi4, blsp_uart4, qdss_cti, qdss_cti, _, qdss_gpio, _, _),
+	[18] = PINGROUP(18, sec_mi2s, blsp_spi4, blsp_uart4, blsp_i2c4, gcc_gp1, qdss_gpio, _, _, _),
+	[19] = PINGROUP(19, sec_mi2s, blsp_spi4, blsp_uart4, blsp_i2c4, jitter_bist, gcc_gp2, _, qdss_gpio, _),
+	[20] = PINGROUP(20, _, _, _, _, _, _, _, _, _),
+	[21] = PINGROUP(21, _, _, _, _, _, _, _, _, _),
+	[22] = PINGROUP(22, blsp_uart4, pll_bist, _, _, _, _, _, _, _),
+	[23] = PINGROUP(23, blsp_uart4, blsp_spi2, blsp_spi1, blsp_spi3, blsp_spi4, _, _, _, _),
+	[24] = PINGROUP(24, adsp_ext, _, _, _, _, _, _, _, _),
+	[25] = PINGROUP(25, adsp_ext, _, _, _, _, _, _, _, _),
+	[26] = PINGROUP(26, _, _, _, native_char, _, _, _, _, _),
+	[27] = PINGROUP(27, _, _, _, _, _, _, _, _, _),
+	[28] = PINGROUP(28, qlink0_wmss, _, _, _, _, _, _, _, _),
+	[29] = PINGROUP(29, _, _, _, native_tsense, native_char, _, _, _, _),
+	[30] = PINGROUP(30, _, _, _, _, _, _, _, _, _),
+	[31] = PINGROUP(31, nav_gpio, _, _, _, _, _, _, _, _),
+	[32] = PINGROUP(32, nav_gpio, pll_ref, _, _, _, _, _, _, _),
+	[33] = PINGROUP(33, _, pa_indicator, qdss_gpio, native_char, _, _, _, _, _),
+	[34] = PINGROUP(34, qlink0_en, _, _, _, _, _, _, _, _),
+	[35] = PINGROUP(35, qlink0_req, dbg_out, _, _, _, _, _, _, _),
+	[36] = PINGROUP(36, _, _, cri_trng, _, _, _, _, _, _),
+	[37] = PINGROUP(37, _, _, _, _, _, _, _, _, _),
+	[38] = PINGROUP(38, _, _, prng_rosc, _, _, _, _, _, _),
+	[39] = PINGROUP(39, _, _, _, _, _, _, _, _, _),
+	[40] = PINGROUP(40, _, _, cri_trng0, _, _, _, _, _, _),
+	[41] = PINGROUP(41, _, _, cri_trng1, _, _, _, _, _, _),
+	[42] = PINGROUP(42, _, qdss_gpio, native_char, _, _, _, _, _, _),
+	[43] = PINGROUP(43, _, _, _, _, _, _, _, _, _),
+	[44] = PINGROUP(44, coex_uart, _, _, _, _, _, _, _, _),
+	[45] = PINGROUP(45, coex_uart, ddr_pxi0, _, _, _, _, _, _, _),
+	[46] = PINGROUP(46, m_voc, ddr_bist, ddr_pxi0, _, _, _, _, _, _),
+	[47] = PINGROUP(47, ddr_bist, blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi4, _, _, _, _),
+	[48] = PINGROUP(48, m_voc, blsp_uart1, blsp_uart4, ddr_bist, _, _, _, _, _),
+	[49] = PINGROUP(49, m_voc, blsp_uart1, blsp_uart4, ddr_bist, _, _, _, _, _),
+	[50] = PINGROUP(50, _, _, _, _, _, _, _, _, _),
+	[51] = PINGROUP(51, _, _, _, _, _, _, _, _, _),
+	[52] = PINGROUP(52, _, _, _, _, _, _, _, _, _),
+	[53] = PINGROUP(53, pci_e, _, _, _, _, _, _, _, _),
+	[54] = PINGROUP(54, qdss_cti, qdss_cti, _, _, _, _, _, _, _),
+	[55] = PINGROUP(55, qdss_cti, qdss_cti, tgu_ch0, _, _, _, _, _,	_),
+	[56] = PINGROUP(56, pcie_clkreq, _, _, _, _, _, _, _, _),
+	[57] = PINGROUP(57, _, native_char, _, _, _, _, _, _, _),
+	[58] = PINGROUP(58, _, _, _, _, _, _, _, _, _),
+	[59] = PINGROUP(59, qdss_cti, m_voc, bimc_dte0, _, _, _, _, _, _),
+	[60] = PINGROUP(60, qdss_cti, _, m_voc, _, _, _, _, _, _),
+	[61] = PINGROUP(61, mgpi_clk, qlink2_wmss, bimc_dte1, _, _, _, _, _, _),
+	[62] = PINGROUP(62, i2s_mclk, audio_ref, blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi4, ldo_update, _, _),
+	[63] = PINGROUP(63, blsp_uart2, _, qdss_gpio, atest_char, _, _, _, _, _),
+	[64] = PINGROUP(64, blsp_uart2, qdss_gpio, atest_char3, _, _, _, _, _, _),
+	[65] = PINGROUP(65, blsp_uart2, blsp_i2c2, qdss_cti, qdss_cti, _, qdss_gpio, atest_char2, _, _),
+	[66] = PINGROUP(66, blsp_uart2, blsp_i2c2, qdss_cti, qdss_cti, qdss_gpio, atest_char1, _, _, _),
+	[67] = PINGROUP(67, uim1_data, atest_char0, _, _, _, _, _, _, _),
+	[68] = PINGROUP(68, uim1_present, _, _, _, _, _, _, _, _),
+	[69] = PINGROUP(69, uim1_reset, _, _, _, _, _, _, _, _),
+	[70] = PINGROUP(70, uim1_clk, _, _, _, _, _, _, _, _),
+	[71] = PINGROUP(71, mgpi_clk, qlink2_en, _, _, _, _, _, _, _),
+	[72] = PINGROUP(72, qlink1_en, _, native_tsense, _, _, _, _, _, _),
+	[73] = PINGROUP(73, qlink1_req, _, _, _, _, _, _, _, _),
+	[74] = PINGROUP(74, qlink1_wmss, _, _, _, _, _, _, _, _),
+	[75] = PINGROUP(75, coex_uart2, spmi_coex, _, _, _, _, _, _, _),
+	[76] = PINGROUP(76, coex_uart2, spmi_coex, _, _, _, _, _, _, _),
+	[77] = PINGROUP(77, _, qlink2_req, _, _, _, _, _, _, _),
+	[78] = PINGROUP(78, spmi_vgi, _, _, _, _, _, _, _, _),
+	[79] = PINGROUP(79, spmi_vgi, _, _, _, _, _, _, _, _),
+	[80] = PINGROUP(80, _, blsp_spi1, _, blsp_uart1, _, _, _, _, _),
+	[81] = PINGROUP(81, _, blsp_spi1, _, blsp_uart1, gcc_plltest, _, _, _, _),
+	[82] = PINGROUP(82, _, blsp_spi1, _, blsp_i2c1, gcc_plltest, _, _, _, _),
+	[83] = PINGROUP(83, _, blsp_spi1, _, blsp_i2c1, _, _, _, _, _),
+	[84] = PINGROUP(84, _, ebi2_lcd, _, blsp_i2c4, _, _, _, _, _),
+	[85] = PINGROUP(85, _, ebi2_lcd, _, blsp_i2c4, _, _, _, _, _),
+	[86] = PINGROUP(86, _, _, _, _, _, _, _, _, _),
+	[87] = PINGROUP(87, _, _, _, _, _, _, _, _, _),
+	[88] = PINGROUP(88, _, _, _, _, _, _, _, _, _),
+	[89] = PINGROUP(89, _, _, _, _, ebi2_a, _, _, _, _),
+	[90] = PINGROUP(90, _, _, _, _, ebi2_lcd, _, _, _, _),
+	[91] = PINGROUP(91, _, _, _, _, _, _, _, _, _),
+	[92] = PINGROUP(92, _, _, _, _, _, _, _, _, _),
+	[93] = PINGROUP(93, _, _, usb2phy_ac, _, _, _, _, _, _),
+	[94] = PINGROUP(94, qdss_cti, qdss_cti, _, _, _, _, _, _, _),
+	[95] = PINGROUP(95, qdss_cti, qdss_cti, _, _, _, _, _, _, _),
+	[96] = PINGROUP(96, _, _, _, _, _, _, _, _, _),
+	[97] = PINGROUP(97, _, _, _, _, _, _, _, _, _),
+	[98] = PINGROUP(98, _, _, _, _, _, _, _, _, _),
+	[99] = PINGROUP(99, _, _, _, _, _, _, _, _, _),
+	[100] = PINGROUP(100, _, _, _, _, _, _, _, _, _),
+	[101] = PINGROUP(101, _, _, _, _, _, _, _, _, _),
+	[102] = PINGROUP(102, _, _, coex_uart2, _, _, _, _, _, _),
+	[103] = PINGROUP(103, _, _, coex_uart2, _, _, _, _, _, _),
+	[104] = PINGROUP(104, _, _, _, _, _, _, _, _, _),
+	[105] = PINGROUP(105, _, _, _, _, _, _, _, _, _),
+	[106] = PINGROUP(106, sdc1_tb, _, _, _, _, _, _, _, _),
+	[107] = PINGROUP(107, _, _, _, _, _, _, _, _, _),
+	[108] = UFS_RESET(ufs_reset, 0x0),
+	[109] = SDC_QDSD_PINGROUP(sdc1_rclk, 0x9a000, 15, 0),
+	[110] = SDC_QDSD_PINGROUP(sdc1_clk, 0x9a000, 13, 6),
+	[111] = SDC_QDSD_PINGROUP(sdc1_cmd, 0x9a000, 11, 3),
+	[112] = SDC_QDSD_PINGROUP(sdc1_data, 0x9a000, 9, 0),
+};
+
+static const struct msm_gpio_wakeirq_map sdx65_pdc_map[] = {
+	{1, 20}, {2, 21}, {5, 22}, {6, 23}, {9, 24}, {10, 25},
+	{11, 26}, {12, 27}, {13, 28}, {14, 29}, {15, 30}, {16, 31},
+	{17, 32}, {18, 33}, {19, 34}, {21, 35}, {22, 36}, {23, 70},
+	{24, 37}, {25, 38}, {35, 40}, {43, 41}, {46, 44}, {48, 45},
+	{49, 57}, {50, 46}, {52, 47}, {54, 49}, {55, 50}, {60, 53},
+	{61, 54}, {64, 55}, {65, 81}, {68, 56}, {71, 58}, {73, 59},
+	{77, 77}, {81, 65}, {83, 63}, {84, 64}, {86, 66}, {88, 67},
+	{89, 68}, {90, 69}, {93, 71}, {94, 72}, {95, 73}, {96, 74},
+	{99, 75}, {103, 78}, {104, 79}
+};
+
+static const struct msm_pinctrl_soc_data sdx65_pinctrl = {
+	.pins = sdx65_pins,
+	.npins = ARRAY_SIZE(sdx65_pins),
+	.functions = sdx65_functions,
+	.nfunctions = ARRAY_SIZE(sdx65_functions),
+	.groups = sdx65_groups,
+	.ngroups = ARRAY_SIZE(sdx65_groups),
+	.ngpios = 109,
+	.wakeirq_map = sdx65_pdc_map,
+	.nwakeirq_map = ARRAY_SIZE(sdx65_pdc_map),
+};
+
+static int sdx65_pinctrl_probe(struct platform_device *pdev)
+{
+	return msm_pinctrl_probe(pdev, &sdx65_pinctrl);
+}
+
+static const struct of_device_id sdx65_pinctrl_of_match[] = {
+	{ .compatible = "qcom,sdx65-tlmm", },
+	{ },
+};
+
+static struct platform_driver sdx65_pinctrl_driver = {
+	.driver = {
+		.name = "sdx65-tlmm",
+		.of_match_table = sdx65_pinctrl_of_match,
+	},
+	.probe = sdx65_pinctrl_probe,
+	.remove = msm_pinctrl_remove,
+};
+
+static int __init sdx65_pinctrl_init(void)
+{
+	return platform_driver_register(&sdx65_pinctrl_driver);
+}
+arch_initcall(sdx65_pinctrl_init);
+
+static void __exit sdx65_pinctrl_exit(void)
+{
+	platform_driver_unregister(&sdx65_pinctrl_driver);
+}
+module_exit(sdx65_pinctrl_exit);
+
+MODULE_DESCRIPTION("QTI sdx65 pinctrl driver");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, sdx65_pinctrl_of_match);
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 5+ messages in thread

* Re: [PATCH v3 0/2] Add pinctrl support for SDX65
  2021-10-30  0:03 [PATCH v3 0/2] Add pinctrl support for SDX65 quic_vamslank
  2021-10-30  0:03 ` [PATCH v3 1/2] dt-bindings: pinctrl: qcom: Add SDX65 pinctrl bindings quic_vamslank
  2021-10-30  0:03 ` [PATCH v3 2/2] pinctrl: qcom: Add SDX65 pincontrol driver quic_vamslank
@ 2021-11-09 10:56 ` Linus Walleij
  2 siblings, 0 replies; 5+ messages in thread
From: Linus Walleij @ 2021-11-09 10:56 UTC (permalink / raw)
  To: quic_vamslank
  Cc: agross, bjorn.andersson, linux-arm-msm, linux-gpio, linux-kernel,
	manivannan.sadhasivam

On Sat, Oct 30, 2021 at 2:03 AM <quic_vamslank@quicinc.com> wrote:

> Changes from v2:
>  - Addressed comments from Bjorn
>  - Collected Reviewed-by for the patches

v2 looks good to me and I think there is timeout if anyone wants to
look at the DT bindings so I want to merge this, but it does not
apply to Torvalds master.

Can you please rebase the series on v5.16-rc1 when it is out
(should be monday) and resend?

Yours,
Linus Walleij

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2021-11-09 15:48 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2021-10-30  0:03 [PATCH v3 0/2] Add pinctrl support for SDX65 quic_vamslank
2021-10-30  0:03 ` [PATCH v3 1/2] dt-bindings: pinctrl: qcom: Add SDX65 pinctrl bindings quic_vamslank
2021-11-09 15:49   ` Bjorn Andersson
2021-10-30  0:03 ` [PATCH v3 2/2] pinctrl: qcom: Add SDX65 pincontrol driver quic_vamslank
2021-11-09 10:56 ` [PATCH v3 0/2] Add pinctrl support for SDX65 Linus Walleij

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).