From: Andy Shevchenko <andy.shevchenko@gmail.com>
To: kernel test robot <lkp@intel.com>
Cc: Syed Nayyar Waris <syednwaris@gmail.com>,
kbuild-all@lists.01.org,
"open list:GPIO SUBSYSTEM" <linux-gpio@vger.kernel.org>,
Linus Walleij <linus.walleij@linaro.org>
Subject: Re: [gpio:ib-for-each-clump 4/4] include/linux/bitmap.h:639:45: sparse: sparse: shift too big (64) for type unsigned long
Date: Fri, 17 Jul 2020 00:25:07 +0300 [thread overview]
Message-ID: <CAHp75VezG1ZnC-1UWea2Q-q-=c_32HOcBTXrd7cy4HzB-uW8JA@mail.gmail.com> (raw)
In-Reply-To: <202007170339.nHjeGJBw%lkp@intel.com>
On Thu, Jul 16, 2020 at 11:13 PM kernel test robot <lkp@intel.com> wrote:
>
> tree: https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio.git ib-for-each-clump
> head: 3358c938236d6a1be51124fbbb2698e50689d382
> commit: 3358c938236d6a1be51124fbbb2698e50689d382 [4/4] gpio: xilinx: Utilize generic bitmap_get_value and _set_value.
> config: alpha-randconfig-s031-20200716 (attached as .config)
> compiler: alpha-linux-gcc (GCC) 9.3.0
> reproduce:
> wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
> chmod +x ~/bin/make.cross
> # apt-get install sparse
> # sparse version: v0.6.2-49-g707c5017-dirty
> git checkout 3358c938236d6a1be51124fbbb2698e50689d382
> # save the attached .config to linux build tree
> COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__' ARCH=alpha
>
> If you fix the issue, kindly add following tag as appropriate
> Reported-by: kernel test robot <lkp@intel.com>
>
>
> sparse warnings: (new ones prefixed by >>)
>
> >> include/linux/bitmap.h:639:45: sparse: sparse: shift too big (64) for type unsigned long
> >> include/linux/bitmap.h:639:45: sparse: sparse: shift too big (64) for type unsigned long
> include/linux/bitmap.h:594:63: sparse: sparse: shift too big (64) for type unsigned long
> >> include/linux/bitmap.h:639:45: sparse: sparse: shift too big (64) for type unsigned long
> >> include/linux/bitmap.h:638:17: sparse: sparse: invalid access past the end of 'old' (8 8)
>
> vim +639 include/linux/bitmap.h
>
> 169c474fb22d8a5 William Breathitt Gray 2019-12-04 613
> e77c9b6f35c4bdf Syed Nayyar Waris 2020-06-27 614 /**
> e77c9b6f35c4bdf Syed Nayyar Waris 2020-06-27 615 * bitmap_set_value - set n-bit value within a memory region
> e77c9b6f35c4bdf Syed Nayyar Waris 2020-06-27 616 * @map: address to the bitmap memory region
> e77c9b6f35c4bdf Syed Nayyar Waris 2020-06-27 617 * @value: value of nbits
> e77c9b6f35c4bdf Syed Nayyar Waris 2020-06-27 618 * @start: bit offset of the n-bit value
> e77c9b6f35c4bdf Syed Nayyar Waris 2020-06-27 619 * @nbits: size of value in bits
> e77c9b6f35c4bdf Syed Nayyar Waris 2020-06-27 620 */
> e77c9b6f35c4bdf Syed Nayyar Waris 2020-06-27 621 static inline void bitmap_set_value(unsigned long *map,
> e77c9b6f35c4bdf Syed Nayyar Waris 2020-06-27 622 unsigned long value,
> e77c9b6f35c4bdf Syed Nayyar Waris 2020-06-27 623 unsigned long start, unsigned long nbits)
> e77c9b6f35c4bdf Syed Nayyar Waris 2020-06-27 624 {
> e77c9b6f35c4bdf Syed Nayyar Waris 2020-06-27 625 const size_t index = BIT_WORD(start);
> e77c9b6f35c4bdf Syed Nayyar Waris 2020-06-27 626 const unsigned long offset = start % BITS_PER_LONG;
> e77c9b6f35c4bdf Syed Nayyar Waris 2020-06-27 627 const unsigned long ceiling = roundup(start + 1, BITS_PER_LONG);
> e77c9b6f35c4bdf Syed Nayyar Waris 2020-06-27 628 const unsigned long space = ceiling - start;
If start == 0:
index = 0, offset = 0, ceiling = 64, space = 64
> e77c9b6f35c4bdf Syed Nayyar Waris 2020-06-27 629
> e77c9b6f35c4bdf Syed Nayyar Waris 2020-06-27 630 value &= GENMASK(nbits - 1, 0);
> e77c9b6f35c4bdf Syed Nayyar Waris 2020-06-27 631
> e77c9b6f35c4bdf Syed Nayyar Waris 2020-06-27 632 if (space >= nbits) {
> e77c9b6f35c4bdf Syed Nayyar Waris 2020-06-27 633 map[index] &= ~(GENMASK(nbits + offset - 1, offset));
> e77c9b6f35c4bdf Syed Nayyar Waris 2020-06-27 634 map[index] |= value << offset;
if nbits > space...
> e77c9b6f35c4bdf Syed Nayyar Waris 2020-06-27 635 } else {
> e77c9b6f35c4bdf Syed Nayyar Waris 2020-06-27 636 map[index] &= ~BITMAP_FIRST_WORD_MASK(start);
> e77c9b6f35c4bdf Syed Nayyar Waris 2020-06-27 637 map[index] |= value << offset;
> e77c9b6f35c4bdf Syed Nayyar Waris 2020-06-27 @638 map[index + 1] &= ~BITMAP_LAST_WORD_MASK(start + nbits);
> e77c9b6f35c4bdf Syed Nayyar Waris 2020-06-27 @639 map[index + 1] |= (value >> space);
space = 64...
> e77c9b6f35c4bdf Syed Nayyar Waris 2020-06-27 640 }
> e77c9b6f35c4bdf Syed Nayyar Waris 2020-06-27 641 }
I don't see the test case for this. Can you provide one?
--
With Best Regards,
Andy Shevchenko
next prev parent reply other threads:[~2020-07-16 21:25 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-16 19:48 [gpio:ib-for-each-clump 4/4] include/linux/bitmap.h:639:45: sparse: sparse: shift too big (64) for type unsigned long kernel test robot
2020-07-16 21:25 ` Andy Shevchenko [this message]
2020-07-17 4:49 ` Syed Nayyar Waris
2020-07-17 7:14 ` [kbuild-all] " Rong Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAHp75VezG1ZnC-1UWea2Q-q-=c_32HOcBTXrd7cy4HzB-uW8JA@mail.gmail.com' \
--to=andy.shevchenko@gmail.com \
--cc=kbuild-all@lists.01.org \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=lkp@intel.com \
--cc=syednwaris@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).