Re: [PATCH 2/3] ASoC: codec: wcd938x: Convert to GPIO descriptors

[Steev Klimaszewski <steev@kali.org>]

Hi Peng Fan,

On Sun, Mar 23, 2025 at 9:28 PM Peng Fan (OSS) <peng.fan@oss.nxp.com> wrote:
>
> From: Peng Fan <peng.fan@nxp.com>
>
> of_gpio.h is deprecated, update the driver to use GPIO descriptors.
>  - Use dev_gpiod_get to get GPIO descriptor.
>  - Use gpiod_set_value to configure output value.
>
> With legacy of_gpio API, the driver set gpio value 0 to assert reset,
> and 1 to deassert reset. And the reset-gpios use GPIO_ACTIVE_LOW flag in
> DTS, so set GPIOD_ASIS when get GPIO descriptors, and set value 1 means
> output low, set value 0 means output high with gpiod API.
>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
>  sound/soc/codecs/wcd938x.c | 13 ++++++-------
>  1 file changed, 6 insertions(+), 7 deletions(-)
>
> diff --git a/sound/soc/codecs/wcd938x.c b/sound/soc/codecs/wcd938x.c
> index 1ae498c323912ed799dcc033e7777936d90c9284..c70da29406f36883e4926eca40ab5ba5df02c383 100644
> --- a/sound/soc/codecs/wcd938x.c
> +++ b/sound/soc/codecs/wcd938x.c
> @@ -11,7 +11,6 @@
>  #include <linux/pm_runtime.h>
>  #include <linux/component.h>
>  #include <sound/tlv.h>
> -#include <linux/of_gpio.h>
>  #include <linux/of.h>
>  #include <sound/jack.h>
>  #include <sound/pcm.h>
> @@ -171,7 +170,7 @@ struct wcd938x_priv {
>         int flyback_cur_det_disable;
>         int ear_rx_path;
>         int variant;
> -       int reset_gpio;
> +       struct gpio_desc *reset_gpio;
>         struct gpio_desc *us_euro_gpio;
>         u32 micb1_mv;
>         u32 micb2_mv;
> @@ -3251,9 +3250,9 @@ static int wcd938x_populate_dt_data(struct wcd938x_priv *wcd938x, struct device
>         struct wcd_mbhc_config *cfg = &wcd938x->mbhc_cfg;
>         int ret;
>
> -       wcd938x->reset_gpio = of_get_named_gpio(dev->of_node, "reset-gpios", 0);
> -       if (wcd938x->reset_gpio < 0)
> -               return dev_err_probe(dev, wcd938x->reset_gpio,
> +       wcd938x->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_ASIS);
> +       if (IS_ERR(wcd938x->reset_gpio))
> +               return dev_err_probe(dev, PTR_ERR(wcd938x->reset_gpio),
>                                      "Failed to get reset gpio\n");
>
>         wcd938x->us_euro_gpio = devm_gpiod_get_optional(dev, "us-euro",
> @@ -3297,10 +3296,10 @@ static int wcd938x_populate_dt_data(struct wcd938x_priv *wcd938x, struct device
>
>  static int wcd938x_reset(struct wcd938x_priv *wcd938x)
>  {
> -       gpio_direction_output(wcd938x->reset_gpio, 0);
> +       gpiod_set_value(wcd938x->reset_gpio, 1);
>         /* 20us sleep required after pulling the reset gpio to LOW */
>         usleep_range(20, 30);
> -       gpio_set_value(wcd938x->reset_gpio, 1);
> +       gpiod_set_value(wcd938x->reset_gpio, 0);
>         /* 20us sleep required after pulling the reset gpio to HIGH */
>         usleep_range(20, 30);
>
>
> --
> 2.37.1
>
>

With this patchset applied, the wcd938x codec used in the Thinkpad
X13s stops working:

wcd938x_codec audio-codec: soundwire device init timeout
wcd938x_codec audio-codec: ASoC: error at snd_soc_component_probe on
audio-codec: -110
snd-sc8280xp sound: ASoC: failed to instantiate card -110
snd-sc8280xp sound: probe with driver snd-sc8280xp failed with error -110

-- steev