[PATCH 0/9] pinctrl: sh-pfc: r8a7795: Fix pin assignment definitions

[PATCH 0/9] pinctrl: sh-pfc: r8a7795: Fix pin assignment definitions

[Yoshihiro Kaneko]

This series fixes pin assignment definitions for R8A7795 SoC.
This series is based on the for-next branch of linux-pinctrl tree.

Takeshi Kihara (9):
  pinctrl: sh-pfc: r8a7795: Fix MOD_SEL1 bit[25:24] to 0x3 when using
    STP_ISEN_1_D
  pinctrl: sh-pfc: r8a7795: Fix MOD_SEL2 bit26 to 0x0 when using SCK5_A
  pinctrl: sh-pfc: r8a7795: Fix SCIF_CLK_{A,B} pin's MOD_SEL assignment
    to MOD_SEL1 bit10
  pinctrl: sh-pfc: r8a7795: Fix FMCLK{_C,_D} and FMIN{_C,_D} pin
    function definitions
  pinctrl: sh-pfc: r8a7795: Fix NFDATA{0..13} and NF{ALE,CLE,WE_N,RE_N}
    pin function definitions
  pinctrl: sh-pfc: r8a7795: Fix MOD_SEL register pin assignment for
    TCLK{1,2}_{A,B} pins group
  pinctrl: sh-pfc: r8a7795: Fix to delete FSCLKST pin and IPSR7
    bit[15:12] register definitions
  pinctrl: sh-pfc: r8a7795: Rename CS1# pin function definitions
  pinctrl: sh-pfc: r8a7795: Fix to reserved MOD_SEL2 bit22

 drivers/pinctrl/sh-pfc/pfc-r8a7795.c | 93 +++++++++++++++++-------------------
 1 file changed, 45 insertions(+), 48 deletions(-)

-- 
1.9.1

[PATCH 1/9] pinctrl: sh-pfc: r8a7795: Fix MOD_SEL1 bit[25:24] to 0x3 when using STP_ISEN_1_D

[Yoshihiro Kaneko]

From: Takeshi Kihara <takeshi.kihara.df@renesas.com>

This patch fixes the implementation incorrect of MOD_SEL1 bit[25:24]
value when STP_ISEN_1_D pin function is selected for IPSR17 bit[27:24].

This is a correction to the incorrect implementation of MOD_SEL register
pin assignment for R8A7795 SoC specification of R-Car Gen3 Hardware
User's Manual Rev.0.51E or later.

Fixes: 0b0ffc96dbe3 ("pinctrl: sh-pfc: Initial R8A7795 PFC support)
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
---
 drivers/pinctrl/sh-pfc/pfc-r8a7795.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7795.c b/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
index 1656295..73507bf 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
@@ -1460,7 +1460,7 @@ enum {
 	PINMUX_IPSR_GPSR(IP17_27_24,	AUDIO_CLKOUT_B),
 	PINMUX_IPSR_MSEL(IP17_27_24,	SSI_SCK2_B,		SEL_SSI_1),
 	PINMUX_IPSR_MSEL(IP17_27_24,	TS_SDEN1_D,		SEL_TSIF1_3),
-	PINMUX_IPSR_MSEL(IP17_27_24,	STP_ISEN_1_D,		SEL_SSP1_1_2),
+	PINMUX_IPSR_MSEL(IP17_27_24,	STP_ISEN_1_D,		SEL_SSP1_1_3),
 	PINMUX_IPSR_MSEL(IP17_27_24,	STP_OPWM_0_E,		SEL_SSP1_0_4),
 	PINMUX_IPSR_MSEL(IP17_27_24,	RIF3_D0_B,		SEL_DRIF3_1),
 	PINMUX_IPSR_MSEL(IP17_27_24,	TCLK2_B,		SEL_TIMER_TMU_1),
-- 
1.9.1

[PATCH 2/9] pinctrl: sh-pfc: r8a7795: Fix MOD_SEL2 bit26 to 0x0 when using SCK5_A

[Yoshihiro Kaneko]

From: Takeshi Kihara <takeshi.kihara.df@renesas.com>

This patch fixes the implementation incorrect of MOD_SEL2 bit26 value
when SCK5_A pin function is selected for IPSR16 bit[31:28].

This is a correction to the incorrect implementation of MOD_SEL register
pin assignment for R8A7795 ES2.0 SoC specification of R-Car Gen3 Hardware
User's Manual Rev.0.51E or later.

Fixes: 12f5d9a1dc7f ("pinctrl: sh-pfc: r8a7795: Replace for Renesas R8A7795 ES2.0 SoC")
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
---
 drivers/pinctrl/sh-pfc/pfc-r8a7795.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7795.c b/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
index 73507bf..cd433fb 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
@@ -1409,7 +1409,7 @@ enum {
 	PINMUX_IPSR_MSEL(IP16_31_28,	SSI_WS1_B,		SEL_SSI_1),
 	PINMUX_IPSR_GPSR(IP16_31_28,	SCK1),
 	PINMUX_IPSR_MSEL(IP16_31_28,	STP_IVCXO27_1_A,	SEL_SSP1_1_0),
-	PINMUX_IPSR_GPSR(IP16_31_28,	SCK5_A),
+	PINMUX_IPSR_MSEL(IP16_31_28,	SCK5_A,			SEL_SCIF5_0),
 
 	/* IPSR17 */
 	PINMUX_IPSR_MSEL(IP17_3_0,	AUDIO_CLKA_A,		SEL_ADG_A_0),
-- 
1.9.1

[PATCH 3/9] pinctrl: sh-pfc: r8a7795: Fix SCIF_CLK_{A,B} pin's MOD_SEL assignment to MOD_SEL1 bit10

[Yoshihiro Kaneko]

From: Takeshi Kihara <takeshi.kihara.df@renesas.com>

This patch fixes SCIF_CLK_{A,B} pin's MOD_SEL assignment from MOD_SEL1
bit11 to MOD_SEL1 bit10.

This is a correction to the incorrect implementation of IPSR register
pin assignment for R8A7795 ES2.0 SoC specification of R-Car Gen3 Hardware
User's Manual Rev.0.53E or later.

Fixes: 12f5d9a1dc7f ("pinctrl: sh-pfc: r8a7795: Replace for Renesas R8A7795 ES2.0 SoC")
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
---
 drivers/pinctrl/sh-pfc/pfc-r8a7795.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7795.c b/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
index cd433fb..37b96b9 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
@@ -480,7 +480,7 @@
 #define MOD_SEL1_13		FM(SEL_SCIF3_0)		FM(SEL_SCIF3_1)
 #define MOD_SEL1_12		FM(SEL_SCIF2_0)		FM(SEL_SCIF2_1)
 #define MOD_SEL1_11		FM(SEL_SCIF1_0)		FM(SEL_SCIF1_1)
-#define MOD_SEL1_10		FM(SEL_SATA_0)		FM(SEL_SATA_1)
+#define MOD_SEL1_10		FM(SEL_SCIF_0)		FM(SEL_SCIF_1)
 #define MOD_SEL1_9		FM(SEL_REMOCON_0)	FM(SEL_REMOCON_1)
 #define MOD_SEL1_6		FM(SEL_RCAN0_0)		FM(SEL_RCAN0_1)
 #define MOD_SEL1_5		FM(SEL_PWM6_0)		FM(SEL_PWM6_1)
@@ -1201,7 +1201,7 @@ enum {
 	PINMUX_IPSR_GPSR(IP12_27_24,	ADICHS0),
 
 	PINMUX_IPSR_GPSR(IP12_31_28,	SCK2),
-	PINMUX_IPSR_MSEL(IP12_31_28,	SCIF_CLK_B,		SEL_SCIF1_1),
+	PINMUX_IPSR_MSEL(IP12_31_28,	SCIF_CLK_B,		SEL_SCIF_1),
 	PINMUX_IPSR_MSEL(IP12_31_28,	MSIOF1_SCK_B,		SEL_MSIOF1_1),
 	PINMUX_IPSR_MSEL(IP12_31_28,	TS_SCK1_C,		SEL_TSIF1_2),
 	PINMUX_IPSR_MSEL(IP12_31_28,	STP_ISCLK_1_C,		SEL_SSP1_1_2),
@@ -1416,7 +1416,7 @@ enum {
 	PINMUX_IPSR_GPSR(IP17_3_0,	CC5_OSCOUT),
 
 	PINMUX_IPSR_MSEL(IP17_7_4,	AUDIO_CLKB_B,		SEL_ADG_B_1),
-	PINMUX_IPSR_MSEL(IP17_7_4,	SCIF_CLK_A,		SEL_SCIF1_0),
+	PINMUX_IPSR_MSEL(IP17_7_4,	SCIF_CLK_A,		SEL_SCIF_0),
 	PINMUX_IPSR_MSEL(IP17_7_4,	STP_IVCXO27_1_D,	SEL_SSP1_1_3),
 	PINMUX_IPSR_MSEL(IP17_7_4,	REMOCON_A,		SEL_REMOCON_0),
 	PINMUX_IPSR_MSEL(IP17_7_4,	TCLK1_A,		SEL_TIMER_TMU_0),
-- 
1.9.1

[PATCH 4/9] pinctrl: sh-pfc: r8a7795: Fix FMCLK{_C,_D} and FMIN{_C,_D} pin function definitions

[Yoshihiro Kaneko]

From: Takeshi Kihara <takeshi.kihara.df@renesas.com>

This patch fixes the implementation incorrect of IPSR register value
definitions for FMCLK{_C,_D} and FMIN{_C,_D} pins function.

This is a correction to the incorrect implementation of IPSR register pin
assignment of the specifications updated for R8A7795 ES2.0 SoC in R-Car
Gen3 Hardware User's Manual Rev.0.53E.

Fixes: 12f5d9a1dc7f ("pinctrl: sh-pfc: r8a7795: Replace for Renesas R8A7795 ES2.0 SoC")
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
---
 drivers/pinctrl/sh-pfc/pfc-r8a7795.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7795.c b/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
index 37b96b9..3272713 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
@@ -361,8 +361,8 @@
 #define IP17_23_20	FM(USB1_OVC)		F_(0, 0)	FM(MSIOF1_SS2_C)	F_(0, 0)			FM(SSI_WS1_A)	FM(TS_SDAT0_E)	FM(STP_ISD_0_E)		FM(FMIN_B)	FM(RIF2_SYNC_B)		F_(0, 0)	FM(REMOCON_B)	F_(0, 0)	F_(0, 0) FM(HCTS2_N_C) F_(0, 0) F_(0, 0)
 #define IP17_27_24	FM(USB30_PWEN)		F_(0, 0)	F_(0, 0)		FM(AUDIO_CLKOUT_B)		FM(SSI_SCK2_B)	FM(TS_SDEN1_D)	FM(STP_ISEN_1_D)	FM(STP_OPWM_0_E)FM(RIF3_D0_B)		F_(0, 0)	FM(TCLK2_B)	FM(TPU0TO0)	FM(BPFCLK_C) FM(HRTS2_N_C) F_(0, 0) F_(0, 0)
 #define IP17_31_28	FM(USB30_OVC)		F_(0, 0)	F_(0, 0)		FM(AUDIO_CLKOUT1_B)		FM(SSI_WS2_B)	FM(TS_SPSYNC1_D)FM(STP_ISSYNC_1_D)	FM(STP_IVCXO27_0_E)FM(RIF3_D1_B)	F_(0, 0)	FM(FSO_TOE_N)	FM(TPU0TO1)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP18_3_0	FM(USB3_PWEN)		F_(0, 0)	F_(0, 0)		FM(AUDIO_CLKOUT2_B)		FM(SSI_SCK9_B)	FM(TS_SDEN0_E)	FM(STP_ISEN_0_E)	F_(0, 0)	FM(RIF2_D0_B)		F_(0, 0)	F_(0, 0)	FM(TPU0TO2)	F_(0, 0) FM(FMCLK_C) FM(FMCLK_D) F_(0, 0)
-#define IP18_7_4	FM(USB3_OVC)		F_(0, 0)	F_(0, 0)		FM(AUDIO_CLKOUT3_B)		FM(SSI_WS9_B)	FM(TS_SPSYNC0_E)FM(STP_ISSYNC_0_E)	F_(0, 0)	FM(RIF2_D1_B)		F_(0, 0)	F_(0, 0)	FM(TPU0TO3)	F_(0, 0) FM(FMIN_C) FM(FMIN_D) F_(0, 0)
+#define IP18_3_0	FM(USB3_PWEN)		F_(0, 0)	F_(0, 0)		FM(AUDIO_CLKOUT2_B)		FM(SSI_SCK9_B)	FM(TS_SDEN0_E)	FM(STP_ISEN_0_E)	F_(0, 0)	FM(RIF2_D0_B)		F_(0, 0)	F_(0, 0)	FM(TPU0TO2)	FM(FMCLK_C) FM(FMCLK_D) F_(0, 0) F_(0, 0)
+#define IP18_7_4	FM(USB3_OVC)		F_(0, 0)	F_(0, 0)		FM(AUDIO_CLKOUT3_B)		FM(SSI_WS9_B)	FM(TS_SPSYNC0_E)FM(STP_ISSYNC_0_E)	F_(0, 0)	FM(RIF2_D1_B)		F_(0, 0)	F_(0, 0)	FM(TPU0TO3)	FM(FMIN_C) FM(FMIN_D) F_(0, 0) F_(0, 0)
 
 #define PINMUX_GPSR	\
 \
-- 
1.9.1

[PATCH 5/9] pinctrl: sh-pfc: r8a7795: Fix NFDATA{0..13} and NF{ALE,CLE,WE_N,RE_N} pin function definitions

[Yoshihiro Kaneko]

From: Takeshi Kihara <takeshi.kihara.df@renesas.com>

This patch fixes the implementation incorrect of IPSR register value
definitions for NFDATA{0..13} and NF{ALE,CLE,WE_N,RE_N} pins function.

This is a correction to the incorrect implementation of IPSR register pin
assignment of the specifications updated for R8A7795 ES2.0 SoC in R-Car
Gen3 Hardware User's Manual Rev.0.53E.

Fixes: 12f5d9a1dc7f ("pinctrl: sh-pfc: r8a7795: Replace for Renesas R8A7795 ES2.0 SoC")
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
---
 drivers/pinctrl/sh-pfc/pfc-r8a7795.c | 36 ++++++++++++++++++------------------
 1 file changed, 18 insertions(+), 18 deletions(-)

diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7795.c b/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
index 3272713..945d123 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
@@ -285,24 +285,24 @@
 #define IP8_23_20	FM(SD1_DAT1)		FM(SD2_DAT5)	FM(MSIOF1_TXD_G)	FM(NFDATA14_B)			F_(0, 0)	FM(TS_SPSYNC1_B)FM(STP_ISSYNC_1_B)	F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
 #define IP8_27_24	FM(SD1_DAT2)		FM(SD2_DAT6)	FM(MSIOF1_SS1_G)	FM(NFDATA15_B)			F_(0, 0)	FM(TS_SDAT1_B)	FM(STP_ISD_1_B)		F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
 #define IP8_31_28	FM(SD1_DAT3)		FM(SD2_DAT7)	FM(MSIOF1_SS2_G)	FM(NFRB_N_B)			F_(0, 0)	FM(TS_SDEN1_B)	FM(STP_ISEN_1_B)	F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP9_3_0		FM(SD2_CLK)		F_(0, 0)	F_(0, 0)		FM(NFDATA8)			F_(0, 0)	F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP9_7_4		FM(SD2_CMD)		F_(0, 0)	F_(0, 0)		FM(NFDATA9)			F_(0, 0)	F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP9_11_8	FM(SD2_DAT0)		F_(0, 0)	F_(0, 0)		FM(NFDATA10)			F_(0, 0)	F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP9_15_12	FM(SD2_DAT1)		F_(0, 0)	F_(0, 0)		FM(NFDATA11)			F_(0, 0)	F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP9_19_16	FM(SD2_DAT2)		F_(0, 0)	F_(0, 0)		FM(NFDATA12)			F_(0, 0)	F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP9_23_20	FM(SD2_DAT3)		F_(0, 0)	F_(0, 0)		FM(NFDATA13)			F_(0, 0)	F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP9_27_24	FM(SD2_DS)		F_(0, 0)	F_(0, 0)		FM(NFALE)			F_(0, 0)	F_(0, 0)	F_(0, 0)		F_(0, 0)	FM(SATA_DEVSLP_B)	F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP9_31_28	FM(SD3_CLK)		F_(0, 0)	F_(0, 0)		FM(NFWE_N)			F_(0, 0)	F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP10_3_0	FM(SD3_CMD)		F_(0, 0)	F_(0, 0)		FM(NFRE_N)			F_(0, 0)	F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP10_7_4	FM(SD3_DAT0)		F_(0, 0)	F_(0, 0)		FM(NFDATA0)			F_(0, 0)	F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP10_11_8	FM(SD3_DAT1)		F_(0, 0)	F_(0, 0)		FM(NFDATA1)			F_(0, 0)	F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP10_15_12	FM(SD3_DAT2)		F_(0, 0)	F_(0, 0)		FM(NFDATA2)			F_(0, 0)	F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP10_19_16	FM(SD3_DAT3)		F_(0, 0)	F_(0, 0)		FM(NFDATA3)			F_(0, 0)	F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP10_23_20	FM(SD3_DAT4)		FM(SD2_CD_A)	F_(0, 0)		FM(NFDATA4)			F_(0, 0)	F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP10_27_24	FM(SD3_DAT5)		FM(SD2_WP_A)	F_(0, 0)		FM(NFDATA5)			F_(0, 0)	F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP10_31_28	FM(SD3_DAT6)		FM(SD3_CD)	F_(0, 0)		FM(NFDATA6)			F_(0, 0)	F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP11_3_0	FM(SD3_DAT7)		FM(SD3_WP)	F_(0, 0)		FM(NFDATA7)			F_(0, 0)	F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP11_7_4	FM(SD3_DS)		F_(0, 0)	F_(0, 0)		FM(NFCLE)			F_(0, 0)	F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP9_3_0		FM(SD2_CLK)		F_(0, 0)	FM(NFDATA8)		F_(0, 0)			F_(0, 0)	F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP9_7_4		FM(SD2_CMD)		F_(0, 0)	FM(NFDATA9)		F_(0, 0)			F_(0, 0)	F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP9_11_8	FM(SD2_DAT0)		F_(0, 0)	FM(NFDATA10)		F_(0, 0)			F_(0, 0)	F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP9_15_12	FM(SD2_DAT1)		F_(0, 0)	FM(NFDATA11)		F_(0, 0)			F_(0, 0)	F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP9_19_16	FM(SD2_DAT2)		F_(0, 0)	FM(NFDATA12)		F_(0, 0)			F_(0, 0)	F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP9_23_20	FM(SD2_DAT3)		F_(0, 0)	FM(NFDATA13)		F_(0, 0)			F_(0, 0)	F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP9_27_24	FM(SD2_DS)		F_(0, 0)	FM(NFALE)		F_(0, 0)			F_(0, 0)	F_(0, 0)	F_(0, 0)		F_(0, 0)	FM(SATA_DEVSLP_B)	F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP9_31_28	FM(SD3_CLK)		F_(0, 0)	FM(NFWE_N)		F_(0, 0)			F_(0, 0)	F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP10_3_0	FM(SD3_CMD)		F_(0, 0)	FM(NFRE_N)		F_(0, 0)			F_(0, 0)	F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP10_7_4	FM(SD3_DAT0)		F_(0, 0)	FM(NFDATA0)		F_(0, 0)			F_(0, 0)	F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP10_11_8	FM(SD3_DAT1)		F_(0, 0)	FM(NFDATA1)		F_(0, 0)			F_(0, 0)	F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP10_15_12	FM(SD3_DAT2)		F_(0, 0)	FM(NFDATA2)		F_(0, 0)			F_(0, 0)	F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP10_19_16	FM(SD3_DAT3)		F_(0, 0)	FM(NFDATA3)		F_(0, 0)			F_(0, 0)	F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP10_23_20	FM(SD3_DAT4)		FM(SD2_CD_A)	FM(NFDATA4)		F_(0, 0)			F_(0, 0)	F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP10_27_24	FM(SD3_DAT5)		FM(SD2_WP_A)	FM(NFDATA5)		F_(0, 0)			F_(0, 0)	F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP10_31_28	FM(SD3_DAT6)		FM(SD3_CD)	FM(NFDATA6)		F_(0, 0)			F_(0, 0)	F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP11_3_0	FM(SD3_DAT7)		FM(SD3_WP)	FM(NFDATA7)		F_(0, 0)			F_(0, 0)	F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP11_7_4	FM(SD3_DS)		F_(0, 0)	FM(NFCLE)		F_(0, 0)			F_(0, 0)	F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
 #define IP11_11_8	FM(SD0_CD)		F_(0, 0)	FM(NFDATA14_A)		F_(0, 0)			FM(SCL2_B)	FM(SIM0_RST_A)	F_(0, 0)		F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
 
 /* IPSRx */		/* 0 */			/* 1 */		/* 2 */			/* 3 */				/* 4 */		/* 5 */		/* 6 */			/* 7 */		/* 8 */			/* 9 */		/* A */		/* B */		/* C - F */
-- 
1.9.1

[PATCH 6/9] pinctrl: sh-pfc: r8a7795: Fix MOD_SEL register pin assignment for TCLK{1,2}_{A,B} pins group

[Yoshihiro Kaneko]

From: Takeshi Kihara <takeshi.kihara.df@renesas.com>

This patch fixes to set MOD_SEL2 bit19 when using TCLK2_A pin function is
selected for IPSR16 bit[23:20] or using TCLK2_B pin function is selected
for IPSR17 bit[27:24]. And renames MOD_SEL2 bit26 value definition name
to SEL_TIMER_TMU1.

This is a correction because MOD_SEL register specification for R8A7795
ES2.0 SoC was changed in R-Car Gen3 Hardware User's Manual Rev.0.53E.

Fixes: 12f5d9a1dc7f ("pinctrl: sh-pfc: r8a7795: Replace for Renesas R8A7795 ES2.0 SoC")
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
---
 drivers/pinctrl/sh-pfc/pfc-r8a7795.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7795.c b/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
index 945d123..18fea79 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
@@ -469,7 +469,7 @@
 /* MOD_SEL1 */			/* 0 */			/* 1 */			/* 2 */			/* 3 */			/* 4 */			/* 5 */			/* 6 */			/* 7 */
 #define MOD_SEL1_31_30		FM(SEL_TSIF1_0)		FM(SEL_TSIF1_1)		FM(SEL_TSIF1_2)		FM(SEL_TSIF1_3)
 #define MOD_SEL1_29_28_27	FM(SEL_TSIF0_0)		FM(SEL_TSIF0_1)		FM(SEL_TSIF0_2)		FM(SEL_TSIF0_3)		FM(SEL_TSIF0_4)		F_(0, 0)		F_(0, 0)		F_(0, 0)
-#define MOD_SEL1_26		FM(SEL_TIMER_TMU_0)	FM(SEL_TIMER_TMU_1)
+#define MOD_SEL1_26		FM(SEL_TIMER_TMU1_0)	FM(SEL_TIMER_TMU1_1)
 #define MOD_SEL1_25_24		FM(SEL_SSP1_1_0)	FM(SEL_SSP1_1_1)	FM(SEL_SSP1_1_2)	FM(SEL_SSP1_1_3)
 #define MOD_SEL1_23_22_21	FM(SEL_SSP1_0_0)	FM(SEL_SSP1_0_1)	FM(SEL_SSP1_0_2)	FM(SEL_SSP1_0_3)	FM(SEL_SSP1_0_4)	F_(0, 0)		F_(0, 0)		F_(0, 0)
 #define MOD_SEL1_20		FM(SEL_SSI_0)		FM(SEL_SSI_1)
@@ -1276,7 +1276,7 @@ enum {
 	PINMUX_IPSR_MSEL(IP14_3_0,	SSI_SCK2_A,		SEL_SSI_0),
 	PINMUX_IPSR_MSEL(IP14_3_0,	STP_IVCXO27_0_C,	SEL_SSP1_0_2),
 	PINMUX_IPSR_GPSR(IP14_3_0,	AUDIO_CLKOUT3_A),
-	PINMUX_IPSR_MSEL(IP14_3_0,	TCLK1_B,		SEL_TIMER_TMU_1),
+	PINMUX_IPSR_MSEL(IP14_3_0,	TCLK1_B,		SEL_TIMER_TMU1_1),
 
 	PINMUX_IPSR_GPSR(IP14_7_4,	MSIOF0_SS2),
 	PINMUX_IPSR_MSEL(IP14_7_4,	TX5_A,			SEL_SCIF5_0),
@@ -1392,7 +1392,7 @@ enum {
 	PINMUX_IPSR_MSEL(IP16_23_20,	STP_ISEN_1_A,		SEL_SSP1_1_0),
 	PINMUX_IPSR_MSEL(IP16_23_20,	RIF1_D0_A,		SEL_DRIF1_0),
 	PINMUX_IPSR_MSEL(IP16_23_20,	RIF3_D0_A,		SEL_DRIF3_0),
-	PINMUX_IPSR_MSEL(IP16_23_20,	TCLK2_A,		SEL_TIMER_TMU_0),
+	PINMUX_IPSR_MSEL(IP16_23_20,	TCLK2_A,		SEL_TIMER_TMU2_0),
 
 	PINMUX_IPSR_GPSR(IP16_27_24,	SSI_SDATA8),
 	PINMUX_IPSR_MSEL(IP16_27_24,	HRTS2_N_B,		SEL_HSCIF2_1),
@@ -1419,7 +1419,7 @@ enum {
 	PINMUX_IPSR_MSEL(IP17_7_4,	SCIF_CLK_A,		SEL_SCIF_0),
 	PINMUX_IPSR_MSEL(IP17_7_4,	STP_IVCXO27_1_D,	SEL_SSP1_1_3),
 	PINMUX_IPSR_MSEL(IP17_7_4,	REMOCON_A,		SEL_REMOCON_0),
-	PINMUX_IPSR_MSEL(IP17_7_4,	TCLK1_A,		SEL_TIMER_TMU_0),
+	PINMUX_IPSR_MSEL(IP17_7_4,	TCLK1_A,		SEL_TIMER_TMU1_0),
 
 	PINMUX_IPSR_GPSR(IP17_11_8,	USB0_PWEN),
 	PINMUX_IPSR_MSEL(IP17_11_8,	SIM0_RST_C,		SEL_SIMCARD_2),
@@ -1463,7 +1463,7 @@ enum {
 	PINMUX_IPSR_MSEL(IP17_27_24,	STP_ISEN_1_D,		SEL_SSP1_1_3),
 	PINMUX_IPSR_MSEL(IP17_27_24,	STP_OPWM_0_E,		SEL_SSP1_0_4),
 	PINMUX_IPSR_MSEL(IP17_27_24,	RIF3_D0_B,		SEL_DRIF3_1),
-	PINMUX_IPSR_MSEL(IP17_27_24,	TCLK2_B,		SEL_TIMER_TMU_1),
+	PINMUX_IPSR_MSEL(IP17_27_24,	TCLK2_B,		SEL_TIMER_TMU2_1),
 	PINMUX_IPSR_GPSR(IP17_27_24,	TPU0TO0),
 	PINMUX_IPSR_MSEL(IP17_27_24,	BPFCLK_C,		SEL_FM_2),
 	PINMUX_IPSR_MSEL(IP17_27_24,	HRTS2_N_C,		SEL_HSCIF2_2),
-- 
1.9.1

[PATCH 7/9] pinctrl: sh-pfc: r8a7795: Fix to delete FSCLKST pin and IPSR7 bit[15:12] register definitions

[Yoshihiro Kaneko]

From: Takeshi Kihara <takeshi.kihara.df@renesas.com>

This patch fixes the macro definitions of FSCLKST pins function and IPSR7
bit[15:12] register deleted.

This is a correction because IPSR register specification for R8A7795
ES2.0 SoC was changed in R-Car Gen3 Hardware User's Manual Rev.0.53E or
later.

Fixes: 12f5d9a1dc7f ("pinctrl: sh-pfc: r8a7795: Replace for Renesas R8A7795 ES2.0 SoC")
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
---
 drivers/pinctrl/sh-pfc/pfc-r8a7795.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7795.c b/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
index 18fea79..605fb3c 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
@@ -270,7 +270,6 @@
 #define IP7_3_0		FM(D13)			FM(LCDOUT5)	FM(MSIOF2_SS2_D)	FM(TX4_C)			FM(VI4_DATA5_A)	F_(0, 0)	FM(DU_DR5)		F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
 #define IP7_7_4		FM(D14)			FM(LCDOUT6)	FM(MSIOF3_SS1_A)	FM(HRX3_C)			FM(VI4_DATA6_A)	F_(0, 0)	FM(DU_DR6)		FM(SCL6_C)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
 #define IP7_11_8	FM(D15)			FM(LCDOUT7)	FM(MSIOF3_SS2_A)	FM(HTX3_C)			FM(VI4_DATA7_A)	F_(0, 0)	FM(DU_DR7)		FM(SDA6_C)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP7_15_12	FM(FSCLKST)		F_(0, 0)	F_(0, 0)		F_(0, 0)			F_(0, 0)	F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
 #define IP7_19_16	FM(SD0_CLK)		F_(0, 0)	FM(MSIOF1_SCK_E)	F_(0, 0)			F_(0, 0)	F_(0, 0)	FM(STP_OPWM_0_B)	F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
 
 /* IPSRx */		/* 0 */			/* 1 */		/* 2 */			/* 3 */				/* 4 */		/* 5 */		/* 6 */			/* 7 */		/* 8 */			/* 9 */		/* A */		/* B */		/* C - F */
@@ -413,7 +412,7 @@
 FM(IP4_3_0)	IP4_3_0		FM(IP5_3_0)	IP5_3_0		FM(IP6_3_0)	IP6_3_0		FM(IP7_3_0)	IP7_3_0 \
 FM(IP4_7_4)	IP4_7_4		FM(IP5_7_4)	IP5_7_4		FM(IP6_7_4)	IP6_7_4		FM(IP7_7_4)	IP7_7_4 \
 FM(IP4_11_8)	IP4_11_8	FM(IP5_11_8)	IP5_11_8	FM(IP6_11_8)	IP6_11_8	FM(IP7_11_8)	IP7_11_8 \
-FM(IP4_15_12)	IP4_15_12	FM(IP5_15_12)	IP5_15_12	FM(IP6_15_12)	IP6_15_12	FM(IP7_15_12)	IP7_15_12 \
+FM(IP4_15_12)	IP4_15_12	FM(IP5_15_12)	IP5_15_12	FM(IP6_15_12)	IP6_15_12 \
 FM(IP4_19_16)	IP4_19_16	FM(IP5_19_16)	IP5_19_16	FM(IP6_19_16)	IP6_19_16	FM(IP7_19_16)	IP7_19_16 \
 FM(IP4_23_20)	IP4_23_20	FM(IP5_23_20)	IP5_23_20	FM(IP6_23_20)	IP6_23_20	FM(IP7_23_20)	IP7_23_20 \
 FM(IP4_27_24)	IP4_27_24	FM(IP5_27_24)	IP5_27_24	FM(IP6_27_24)	IP6_27_24	FM(IP7_27_24)	IP7_27_24 \
@@ -986,8 +985,6 @@ enum {
 	PINMUX_IPSR_GPSR(IP7_11_8,	DU_DR7),
 	PINMUX_IPSR_MSEL(IP7_11_8,	SDA6_C,			SEL_I2C6_2),
 
-	PINMUX_IPSR_GPSR(IP7_15_12,	FSCLKST),
-
 	PINMUX_IPSR_GPSR(IP7_19_16,	SD0_CLK),
 	PINMUX_IPSR_MSEL(IP7_19_16,	MSIOF1_SCK_E,		SEL_MSIOF1_4),
 	PINMUX_IPSR_MSEL(IP7_19_16,	STP_OPWM_0_B,		SEL_SSP1_0_1),
@@ -2601,7 +2598,7 @@ enum {
 		IP7_27_24
 		IP7_23_20
 		IP7_19_16
-		IP7_15_12
+		/* IP7_15_12 */ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
 		IP7_11_8
 		IP7_7_4
 		IP7_3_0 }
-- 
1.9.1

[PATCH 8/9] pinctrl: sh-pfc: r8a7795: Rename CS1# pin function definitions

[Yoshihiro Kaneko]

From: Takeshi Kihara <takeshi.kihara.df@renesas.com>

This patch renames the pin function macro definitions of the GPSR1 and
IPSR4 registers value for the CS1# pin.

This is a correction because GPSR and IPSR register specification for
R8A7795 ES2.0 SoC was changed in R-Car Gen3 Hardware User's Manual
Rev.0.54E.

Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
---
 drivers/pinctrl/sh-pfc/pfc-r8a7795.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7795.c b/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
index 605fb3c..44beb7c 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
@@ -61,7 +61,7 @@
 #define GPSR1_24	F_(RD_WR_N,		IP4_31_28)
 #define GPSR1_23	F_(RD_N,		IP4_27_24)
 #define GPSR1_22	F_(BS_N,		IP4_23_20)
-#define GPSR1_21	F_(CS1_N_A26,		IP4_19_16)
+#define GPSR1_21	F_(CS1_N,		IP4_19_16)
 #define GPSR1_20	F_(CS0_N,		IP4_15_12)
 #define GPSR1_19	F_(A19,			IP4_11_8)
 #define GPSR1_18	F_(A18,			IP4_7_4)
@@ -247,7 +247,7 @@
 #define IP4_7_4		FM(A18)			FM(LCDOUT10)	F_(0, 0)		F_(0, 0)			FM(VI4_HSYNC_N)	F_(0, 0)	FM(DU_DG2)		F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
 #define IP4_11_8	FM(A19)			FM(LCDOUT11)	F_(0, 0)		F_(0, 0)			FM(VI4_CLKENB)	F_(0, 0)	FM(DU_DG3)		F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
 #define IP4_15_12	FM(CS0_N)		F_(0, 0)	F_(0, 0)		F_(0, 0)			F_(0, 0)	FM(VI5_CLKENB)	F_(0, 0)		F_(0, 0)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP4_19_16	FM(CS1_N_A26)		F_(0, 0)	F_(0, 0)		F_(0, 0)			F_(0, 0)	FM(VI5_CLK)	F_(0, 0)		FM(EX_WAIT0_B)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP4_19_16	FM(CS1_N)		F_(0, 0)	F_(0, 0)		F_(0, 0)			F_(0, 0)	FM(VI5_CLK)	F_(0, 0)		FM(EX_WAIT0_B)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
 #define IP4_23_20	FM(BS_N)		FM(QSTVA_QVS)	FM(MSIOF3_SCK_D)	FM(SCK3)			FM(HSCK3)	F_(0, 0)	F_(0, 0)		F_(0, 0)	FM(CAN1_TX)		FM(CANFD1_TX)	FM(IETX_A)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
 #define IP4_27_24	FM(RD_N)		F_(0, 0)	FM(MSIOF3_SYNC_D)	FM(RX3_A)			FM(HRX3_A)	F_(0, 0)	F_(0, 0)		F_(0, 0)	FM(CAN0_TX_A)		FM(CANFD0_TX_A)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
 #define IP4_31_28	FM(RD_WR_N)		F_(0, 0)	FM(MSIOF3_RXD_D)	FM(TX3_A)			FM(HTX3_A)	F_(0, 0)	F_(0, 0)		F_(0, 0)	FM(CAN0_RX_A)		FM(CANFD0_RX_A)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
@@ -832,7 +832,7 @@ enum {
 	PINMUX_IPSR_GPSR(IP4_15_12,	CS0_N),
 	PINMUX_IPSR_GPSR(IP4_15_12,	VI5_CLKENB),
 
-	PINMUX_IPSR_GPSR(IP4_19_16,	CS1_N_A26),
+	PINMUX_IPSR_GPSR(IP4_19_16,	CS1_N),
 	PINMUX_IPSR_GPSR(IP4_19_16,	VI5_CLK),
 	PINMUX_IPSR_MSEL(IP4_19_16,	EX_WAIT0_B,		SEL_LBSC_1),
 
@@ -3174,7 +3174,7 @@ static int r8a7795_pin_to_pocctrl(struct sh_pfc *pfc, unsigned int pin, u32 *poc
 	{ RCAR_GP_PIN(1, 24),    PU2,  5 },	/* RD_WR_N */
 	{ RCAR_GP_PIN(1, 23),    PU2,  4 },	/* RD_N */
 	{ RCAR_GP_PIN(1, 22),    PU2,  3 },	/* BS_N */
-	{ RCAR_GP_PIN(1, 21),    PU2,  2 },	/* CS1_N_A26 */
+	{ RCAR_GP_PIN(1, 21),    PU2,  2 },	/* CS1_N */
 	{ RCAR_GP_PIN(1, 20),    PU2,  1 },	/* CS0_N */
 	{ PIN_NUMBER('F', 1),    PU2,  0 },	/* CLKOUT */
 
-- 
1.9.1

[PATCH 9/9] pinctrl: sh-pfc: r8a7795: Fix to reserved MOD_SEL2 bit22

[Yoshihiro Kaneko]

From: Takeshi Kihara <takeshi.kihara.df@renesas.com>

This is a correction because MOD_SEL register specification for R8A7795
ES2.0 SoC was changed in R-Car Gen3 Hardware User's Manual Rev.0.54E.

Fixes: 12f5d9a1dc7f ("pinctrl: sh-pfc: r8a7795: Replace for Renesas R8A7795 ES2.0 SoC")
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
---
 drivers/pinctrl/sh-pfc/pfc-r8a7795.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7795.c b/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
index 44beb7c..bbed0d6 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
@@ -496,7 +496,6 @@
 #define MOD_SEL2_28_27		FM(SEL_FM_0)		FM(SEL_FM_1)		FM(SEL_FM_2)		FM(SEL_FM_3)
 #define MOD_SEL2_26		FM(SEL_SCIF5_0)		FM(SEL_SCIF5_1)
 #define MOD_SEL2_25_24_23	FM(SEL_I2C6_0)		FM(SEL_I2C6_1)		FM(SEL_I2C6_2)		F_(0, 0)		F_(0, 0)		F_(0, 0)		F_(0, 0)		F_(0, 0)
-#define MOD_SEL2_22		FM(SEL_NDF_0)		FM(SEL_NDF_1)
 #define MOD_SEL2_21		FM(SEL_SSI2_0)		FM(SEL_SSI2_1)
 #define MOD_SEL2_20		FM(SEL_SSI9_0)		FM(SEL_SSI9_1)
 #define MOD_SEL2_19		FM(SEL_TIMER_TMU2_0)	FM(SEL_TIMER_TMU2_1)
@@ -513,7 +512,7 @@
 MOD_SEL0_26_25_24	MOD_SEL1_26		MOD_SEL2_26 \
 			MOD_SEL1_25_24		MOD_SEL2_25_24_23 \
 MOD_SEL0_23		MOD_SEL1_23_22_21 \
-MOD_SEL0_22					MOD_SEL2_22 \
+MOD_SEL0_22 \
 MOD_SEL0_21					MOD_SEL2_21 \
 MOD_SEL0_20		MOD_SEL1_20		MOD_SEL2_20 \
 MOD_SEL0_19		MOD_SEL1_19		MOD_SEL2_19 \
@@ -1020,35 +1019,35 @@ enum {
 
 	PINMUX_IPSR_GPSR(IP8_15_12,	SD1_CMD),
 	PINMUX_IPSR_MSEL(IP8_15_12,	MSIOF1_SYNC_G,		SEL_MSIOF1_6),
-	PINMUX_IPSR_MSEL(IP8_15_12,	NFCE_N_B,		SEL_NDF_1),
+	PINMUX_IPSR_GPSR(IP8_15_12,	NFCE_N_B),
 	PINMUX_IPSR_MSEL(IP8_15_12,	SIM0_D_A,		SEL_SIMCARD_0),
 	PINMUX_IPSR_MSEL(IP8_15_12,	STP_IVCXO27_1_B,	SEL_SSP1_1_1),
 
 	PINMUX_IPSR_GPSR(IP8_19_16,	SD1_DAT0),
 	PINMUX_IPSR_GPSR(IP8_19_16,	SD2_DAT4),
 	PINMUX_IPSR_MSEL(IP8_19_16,	MSIOF1_RXD_G,		SEL_MSIOF1_6),
-	PINMUX_IPSR_MSEL(IP8_19_16,	NFWP_N_B,		SEL_NDF_1),
+	PINMUX_IPSR_GPSR(IP8_19_16,	NFWP_N_B),
 	PINMUX_IPSR_MSEL(IP8_19_16,	TS_SCK1_B,		SEL_TSIF1_1),
 	PINMUX_IPSR_MSEL(IP8_19_16,	STP_ISCLK_1_B,		SEL_SSP1_1_1),
 
 	PINMUX_IPSR_GPSR(IP8_23_20,	SD1_DAT1),
 	PINMUX_IPSR_GPSR(IP8_23_20,	SD2_DAT5),
 	PINMUX_IPSR_MSEL(IP8_23_20,	MSIOF1_TXD_G,		SEL_MSIOF1_6),
-	PINMUX_IPSR_MSEL(IP8_23_20,	NFDATA14_B,		SEL_NDF_1),
+	PINMUX_IPSR_GPSR(IP8_23_20,	NFDATA14_B),
 	PINMUX_IPSR_MSEL(IP8_23_20,	TS_SPSYNC1_B,		SEL_TSIF1_1),
 	PINMUX_IPSR_MSEL(IP8_23_20,	STP_ISSYNC_1_B,		SEL_SSP1_1_1),
 
 	PINMUX_IPSR_GPSR(IP8_27_24,	SD1_DAT2),
 	PINMUX_IPSR_GPSR(IP8_27_24,	SD2_DAT6),
 	PINMUX_IPSR_MSEL(IP8_27_24,	MSIOF1_SS1_G,		SEL_MSIOF1_6),
-	PINMUX_IPSR_MSEL(IP8_27_24,	NFDATA15_B,		SEL_NDF_1),
+	PINMUX_IPSR_GPSR(IP8_27_24,	NFDATA15_B),
 	PINMUX_IPSR_MSEL(IP8_27_24,	TS_SDAT1_B,		SEL_TSIF1_1),
 	PINMUX_IPSR_MSEL(IP8_27_24,	STP_ISD_1_B,		SEL_SSP1_1_1),
 
 	PINMUX_IPSR_GPSR(IP8_31_28,	SD1_DAT3),
 	PINMUX_IPSR_GPSR(IP8_31_28,	SD2_DAT7),
 	PINMUX_IPSR_MSEL(IP8_31_28,	MSIOF1_SS2_G,		SEL_MSIOF1_6),
-	PINMUX_IPSR_MSEL(IP8_31_28,	NFRB_N_B,		SEL_NDF_1),
+	PINMUX_IPSR_GPSR(IP8_31_28,	NFRB_N_B),
 	PINMUX_IPSR_MSEL(IP8_31_28,	TS_SDEN1_B,		SEL_TSIF1_1),
 	PINMUX_IPSR_MSEL(IP8_31_28,	STP_ISEN_1_B,		SEL_SSP1_1_1),
 
@@ -1268,7 +1267,7 @@ enum {
 	/* IPSR14 */
 	PINMUX_IPSR_GPSR(IP14_3_0,	MSIOF0_SS1),
 	PINMUX_IPSR_MSEL(IP14_3_0,	RX5_A,			SEL_SCIF5_0),
-	PINMUX_IPSR_MSEL(IP14_3_0,	NFWP_N_A,		SEL_NDF_0),
+	PINMUX_IPSR_GPSR(IP14_3_0,	NFWP_N_A),
 	PINMUX_IPSR_MSEL(IP14_3_0,	AUDIO_CLKA_C,		SEL_ADG_A_2),
 	PINMUX_IPSR_MSEL(IP14_3_0,	SSI_SCK2_A,		SEL_SSI_0),
 	PINMUX_IPSR_MSEL(IP14_3_0,	STP_IVCXO27_0_C,	SEL_SSP1_0_2),
@@ -2779,7 +2778,8 @@ enum {
 		MOD_SEL2_28_27
 		MOD_SEL2_26
 		MOD_SEL2_25_24_23
-		MOD_SEL2_22
+		/* RESERVED 22 */
+		0, 0,
 		MOD_SEL2_21
 		MOD_SEL2_20
 		MOD_SEL2_19
-- 
1.9.1

Re: [PATCH 1/9] pinctrl: sh-pfc: r8a7795: Fix MOD_SEL1 bit[25:24] to 0x3 when using STP_ISEN_1_D

[Geert Uytterhoeven]

On Fri, Jul 28, 2017 at 1:41 PM, Yoshihiro Kaneko <ykaneko0929@gmail.com> wrote:
> From: Takeshi Kihara <takeshi.kihara.df@renesas.com>
>
> This patch fixes the implementation incorrect of MOD_SEL1 bit[25:24]
> value when STP_ISEN_1_D pin function is selected for IPSR17 bit[27:24].
>
> This is a correction to the incorrect implementation of MOD_SEL register
> pin assignment for R8A7795 SoC specification of R-Car Gen3 Hardware
> User's Manual Rev.0.51E or later.
>
> Fixes: 0b0ffc96dbe3 ("pinctrl: sh-pfc: Initial R8A7795 PFC support)
> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

i.e. will queue in sh-pfc-for-v4.14.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 2/9] pinctrl: sh-pfc: r8a7795: Fix MOD_SEL2 bit26 to 0x0 when using SCK5_A

[Geert Uytterhoeven]

On Fri, Jul 28, 2017 at 1:41 PM, Yoshihiro Kaneko <ykaneko0929@gmail.com> wrote:
> From: Takeshi Kihara <takeshi.kihara.df@renesas.com>
>
> This patch fixes the implementation incorrect of MOD_SEL2 bit26 value
> when SCK5_A pin function is selected for IPSR16 bit[31:28].
>
> This is a correction to the incorrect implementation of MOD_SEL register
> pin assignment for R8A7795 ES2.0 SoC specification of R-Car Gen3 Hardware
> User's Manual Rev.0.51E or later.
>
> Fixes: 12f5d9a1dc7f ("pinctrl: sh-pfc: r8a7795: Replace for Renesas R8A7795 ES2.0 SoC")

That commit is not in upstream. The proper one is:
Fixes: b205914c8f822ef2 ("pinctrl: sh-pfc: r8a7795: Add support for
R-Car H3 ES2.0")

> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

i.e. will queue in sh-pfc-for-v4.14 with the above fixed.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 3/9] pinctrl: sh-pfc: r8a7795: Fix SCIF_CLK_{A,B} pin's MOD_SEL assignment to MOD_SEL1 bit10

[Geert Uytterhoeven]

On Fri, Jul 28, 2017 at 1:41 PM, Yoshihiro Kaneko <ykaneko0929@gmail.com> wrote:
> From: Takeshi Kihara <takeshi.kihara.df@renesas.com>
>
> This patch fixes SCIF_CLK_{A,B} pin's MOD_SEL assignment from MOD_SEL1
> bit11 to MOD_SEL1 bit10.
>
> This is a correction to the incorrect implementation of IPSR register
> pin assignment for R8A7795 ES2.0 SoC specification of R-Car Gen3 Hardware
> User's Manual Rev.0.53E or later.
>
> Fixes: 12f5d9a1dc7f ("pinctrl: sh-pfc: r8a7795: Replace for Renesas R8A7795 ES2.0 SoC")

Wrong reference.

> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

i.e. will queue in sh-pfc-for-v4.14 with reference corrected.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 4/9] pinctrl: sh-pfc: r8a7795: Fix FMCLK{_C,_D} and FMIN{_C,_D} pin function definitions

[Geert Uytterhoeven]

On Fri, Jul 28, 2017 at 1:41 PM, Yoshihiro Kaneko <ykaneko0929@gmail.com> wrote:
> From: Takeshi Kihara <takeshi.kihara.df@renesas.com>
>
> This patch fixes the implementation incorrect of IPSR register value
> definitions for FMCLK{_C,_D} and FMIN{_C,_D} pins function.
>
> This is a correction to the incorrect implementation of IPSR register pin
> assignment of the specifications updated for R8A7795 ES2.0 SoC in R-Car
> Gen3 Hardware User's Manual Rev.0.53E.
>
> Fixes: 12f5d9a1dc7f ("pinctrl: sh-pfc: r8a7795: Replace for Renesas R8A7795 ES2.0 SoC")
> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

i.e. will queue in sh-pfc-for-v4.14 with reference corrected.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 5/9] pinctrl: sh-pfc: r8a7795: Fix NFDATA{0..13} and NF{ALE,CLE,WE_N,RE_N} pin function definitions

[Geert Uytterhoeven]

On Fri, Jul 28, 2017 at 1:41 PM, Yoshihiro Kaneko <ykaneko0929@gmail.com> wrote:
> From: Takeshi Kihara <takeshi.kihara.df@renesas.com>
>
> This patch fixes the implementation incorrect of IPSR register value
> definitions for NFDATA{0..13} and NF{ALE,CLE,WE_N,RE_N} pins function.
>
> This is a correction to the incorrect implementation of IPSR register pin
> assignment of the specifications updated for R8A7795 ES2.0 SoC in R-Car
> Gen3 Hardware User's Manual Rev.0.53E.
>
> Fixes: 12f5d9a1dc7f ("pinctrl: sh-pfc: r8a7795: Replace for Renesas R8A7795 ES2.0 SoC")
> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

i.e. will queue in sh-pfc-for-v4.14 with reference corrected.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 6/9] pinctrl: sh-pfc: r8a7795: Fix MOD_SEL register pin assignment for TCLK{1,2}_{A,B} pins group

[Geert Uytterhoeven]

On Fri, Jul 28, 2017 at 1:41 PM, Yoshihiro Kaneko <ykaneko0929@gmail.com> wrote:
> From: Takeshi Kihara <takeshi.kihara.df@renesas.com>
>
> This patch fixes to set MOD_SEL2 bit19 when using TCLK2_A pin function is
> selected for IPSR16 bit[23:20] or using TCLK2_B pin function is selected
> for IPSR17 bit[27:24]. And renames MOD_SEL2 bit26 value definition name
> to SEL_TIMER_TMU1.
>
> This is a correction because MOD_SEL register specification for R8A7795
> ES2.0 SoC was changed in R-Car Gen3 Hardware User's Manual Rev.0.53E.
>
> Fixes: 12f5d9a1dc7f ("pinctrl: sh-pfc: r8a7795: Replace for Renesas R8A7795 ES2.0 SoC")
> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

i.e. will queue in sh-pfc-for-v4.14 with reference corrected.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 7/9] pinctrl: sh-pfc: r8a7795: Fix to delete FSCLKST pin and IPSR7 bit[15:12] register definitions

[Geert Uytterhoeven]

On Fri, Jul 28, 2017 at 1:41 PM, Yoshihiro Kaneko <ykaneko0929@gmail.com> wrote:
> From: Takeshi Kihara <takeshi.kihara.df@renesas.com>
>
> This patch fixes the macro definitions of FSCLKST pins function and IPSR7
> bit[15:12] register deleted.
>
> This is a correction because IPSR register specification for R8A7795
> ES2.0 SoC was changed in R-Car Gen3 Hardware User's Manual Rev.0.53E or
> later.
>
> Fixes: 12f5d9a1dc7f ("pinctrl: sh-pfc: r8a7795: Replace for Renesas R8A7795 ES2.0 SoC")
> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

i.e. will queue in sh-pfc-for-v4.14 with reference corrected.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 8/9] pinctrl: sh-pfc: r8a7795: Rename CS1# pin function definitions

[Geert Uytterhoeven]

On Fri, Jul 28, 2017 at 1:41 PM, Yoshihiro Kaneko <ykaneko0929@gmail.com> wrote:
> From: Takeshi Kihara <takeshi.kihara.df@renesas.com>
>
> This patch renames the pin function macro definitions of the GPSR1 and
> IPSR4 registers value for the CS1# pin.
>
> This is a correction because GPSR and IPSR register specification for
> R8A7795 ES2.0 SoC was changed in R-Car Gen3 Hardware User's Manual
> Rev.0.54E.
>
> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

i.e. will queue in sh-pfc-for-v4.14.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 9/9] pinctrl: sh-pfc: r8a7795: Fix to reserved MOD_SEL2 bit22

[Geert Uytterhoeven]

On Fri, Jul 28, 2017 at 1:41 PM, Yoshihiro Kaneko <ykaneko0929@gmail.com> wrote:
> From: Takeshi Kihara <takeshi.kihara.df@renesas.com>
>
> This is a correction because MOD_SEL register specification for R8A7795
> ES2.0 SoC was changed in R-Car Gen3 Hardware User's Manual Rev.0.54E.
>
> Fixes: 12f5d9a1dc7f ("pinctrl: sh-pfc: r8a7795: Replace for Renesas R8A7795 ES2.0 SoC")
> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

i.e. will queue in sh-pfc-for-v4.14 with reference corrected.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds