Re: [PATCH v3 2/5] irqchip: Add RZ/G2L IA55 Interrupt Controller driver

[Geert Uytterhoeven <geert@linux-m68k.org>]

Hi Marc,

On Thu, May 12, 2022 at 9:23 AM Marc Zyngier <maz@kernel.org> wrote:
> On Wed, 11 May 2022 19:32:07 +0100,
> Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> wrote:
> >
> > Add a driver for the Renesas RZ/G2L Interrupt Controller.
> >
> > This supports external pins being used as interrupts. It supports
> > one line for NMI, 8 external pins and 32 GPIO pins (out of 123)
> > to be used as IRQ lines.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

> > +static int rzg2l_irqc_init(struct device_node *node, struct device_node *parent)
> > +{
> > +     struct irq_domain *irq_domain, *parent_domain;
> > +     struct reset_control *resetn;
> > +     struct rzg2l_irqc_priv *priv;
> > +     struct clk *clk;
> > +     struct clk *pclk;
> > +     int ret;
> > +
> > +     priv = kzalloc(sizeof(*priv), GFP_KERNEL);
> > +     if (!priv)
> > +             return -ENOMEM;
>
> Since you are implementing this as a platform driver, consider
> converting this to the devm_* helpers (you can obtain the device
> structure via of_find_device_by_node()).

So that's the missing piece.
Still, it would be more efficient to just pass the pointer, as
platform_irqchip_probe() already has the pointer.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds