Re: [PATCH RFC 08/16] ARM: dts: aspeed: Use specified wp-inverted property for AST2600 EVB

[Ulf Hansson <ulf.hansson@linaro.org>]

On Thu, 11 Dec 2025 at 09:47, Andrew Jeffery
<andrew@codeconstruct.com.au> wrote:
>
> While sdhci-pltfm supports sdhci,wp-inverted, it also supports
> the un-prefixed and specified wp-inverted property. Switch the EVB
> devicetree to use the specified property to remove warnings when
> checking the DTB.
>
> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>

FWIW:

Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>


> ---
>  arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts
> index 3eba676e57f1..c51977dcb56b 100644
> --- a/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts
> +++ b/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts
> @@ -315,7 +315,7 @@ &sdhci0 {
>         bus-width = <4>;
>         max-frequency = <100000000>;
>         sdhci-caps-mask = <0x7 0x0>;
> -       sdhci,wp-inverted;
> +       wp-inverted;
>         vmmc-supply = <&vcc_sdhci0>;
>         vqmmc-supply = <&vccq_sdhci0>;
>         clk-phase-sd-hs = <7>, <200>;
> @@ -326,7 +326,7 @@ &sdhci1 {
>         bus-width = <4>;
>         max-frequency = <100000000>;
>         sdhci-caps-mask = <0x7 0x0>;
> -       sdhci,wp-inverted;
> +       wp-inverted;
>         vmmc-supply = <&vcc_sdhci1>;
>         vqmmc-supply = <&vccq_sdhci1>;
>         clk-phase-sd-hs = <7>, <200>;
>
> --
> 2.47.3
>
>