Re: [PATCH v4 16/18] MIPS: mobileye: eyeq5: add reset properties to UARTs

["Théo Lebrun" <theo.lebrun@bootlin.com>]

Hello,

On Thu Feb 1, 2024 at 10:13 AM CET, Krzysztof Kozlowski wrote:
> On 31/01/2024 17:26, Théo Lebrun wrote:
> > UART nodes have been added to the devicetree by the initial platform
> > support patch series. Add reset properties now that the reset node is
> > declared.
> > 
> > Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
> > ---
> >  arch/mips/boot/dts/mobileye/eyeq5.dtsi | 3 +++
> >  1 file changed, 3 insertions(+)
> > 
> > diff --git a/arch/mips/boot/dts/mobileye/eyeq5.dtsi b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
> > index 06e941b0ce10..ece71cafb6ee 100644
> > --- a/arch/mips/boot/dts/mobileye/eyeq5.dtsi
> > +++ b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
> > @@ -78,6 +78,7 @@ uart0: serial@800000 {
> >  			interrupts = <GIC_SHARED 6 IRQ_TYPE_LEVEL_HIGH>;
> >  			clocks  = <&uart_clk>, <&occ_periph>;
> >  			clock-names = "uartclk", "apb_pclk";
> > +			resets = <&reset 0 10>;
>
> You touch the same file. Squash the patch with previous one. It's the
> same logical change to add reset to entire SoC. You don't add half of
> reset, right?

Makes sense. I'll update the commit message with that change.

Thanks,

--
Théo Lebrun, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com