linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: "Jonathan Neuschäfer" <j.neuschaefer@gmx.net>
Cc: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
	Linus Walleij <linus.walleij@linaro.org>,
	openbmc@lists.ozlabs.org, Tomer Maimon <tmaimon77@gmail.com>,
	Joel Stanley <joel@jms.id.au>,
	linux-kernel@vger.kernel.org,
	Avi Fishman <avifishman70@gmail.com>,
	Tali Perry <tali.perry1@gmail.com>,
	Patrick Venture <venture@google.com>,
	Nancy Yuen <yuenn@google.com>,
	Benjamin Fair <benjaminfair@google.com>
Subject: Re: [PATCH v2 1/8] dt-bindings: arm/npcm: Add binding for global control registers (GCR)
Date: Fri, 10 Dec 2021 08:54:33 -0600	[thread overview]
Message-ID: <YbNqKfwYes0rH07B@robh.at.kernel.org> (raw)
In-Reply-To: <20211207210823.1975632-2-j.neuschaefer@gmx.net>

On Tue, Dec 07, 2021 at 10:08:16PM +0100, Jonathan Neuschäfer wrote:
> A nuvoton,*-gcr node is present in nuvoton-common-npcm7xx.dtsi and will
> be added to nuvoton-wpcm450.dtsi. It is necessary for the NPCM7xx and
> WPCM450 pinctrl drivers, and may later be used to retrieve SoC model and
> version information.
> 
> This patch adds a binding to describe this node.
> 
> Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
> 
> ---
> v2:
> - Rename node in example to syscon@800000
> - Add subnode to example
> 
> v1:
> - https://lore.kernel.org/lkml/20210602120329.2444672-2-j.neuschaefer@gmx.net/
> ---
>  .../bindings/arm/npcm/nuvoton,gcr.yaml        | 45 +++++++++++++++++++
>  1 file changed, 45 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/arm/npcm/nuvoton,gcr.yaml
> 
> diff --git a/Documentation/devicetree/bindings/arm/npcm/nuvoton,gcr.yaml b/Documentation/devicetree/bindings/arm/npcm/nuvoton,gcr.yaml
> new file mode 100644
> index 0000000000000..62020d7ac305b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/npcm/nuvoton,gcr.yaml
> @@ -0,0 +1,45 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/arm/npcm/nuvoton,gcr.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Global Control Registers block in Nuvoton SoCs
> +
> +maintainers:
> +  - Jonathan Neuschäfer <j.neuschaefer@gmx.net>
> +
> +description: |

Don't need '|' if no formatting.

> +  The Global Control Registers (GCR) are a block of registers in Nuvoton SoCs
> +  that expose misc functionality such as chip model and version information or
> +  pinmux settings.
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - nuvoton,wpcm450-gcr
> +          - nuvoton,npcm750-gcr
> +      - const: syscon
> +      - const: simple-mfd

blank line

> +  reg: true

Need to define how many entries:

maxItems: 1


> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false

Ideally, you should define the child node names, but you can do this:

additionalProperties:
  type: object

which means anything undefined must be a node.

> +
> +examples:
> +  - |
> +    gcr: syscon@800000 {
> +      compatible = "nuvoton,npcm750-gcr", "syscon", "simple-mfd";
> +      reg = <0x800000 0x1000>;
> +
> +      uart-mux-controller {
> +        compatible = "mmio-mux";
> +        #mux-control-cells = <1>;
> +        mux-reg-masks = <0x38 0x07>;
> +        idle-states = <2>;
> +      };
> +    };
> --
> 2.30.2
> 
> 

  parent reply	other threads:[~2021-12-10 14:54 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-07 21:08 [PATCH v2 0/8] Nuvoton WPCM450 pinctrl and GPIO driver Jonathan Neuschäfer
2021-12-07 21:08 ` [PATCH v2 1/8] dt-bindings: arm/npcm: Add binding for global control registers (GCR) Jonathan Neuschäfer
2021-12-08 13:44   ` Rob Herring
2021-12-10 14:54   ` Rob Herring [this message]
2021-12-12 23:12     ` Jonathan Neuschäfer
2021-12-07 21:08 ` [PATCH v2 2/8] MAINTAINERS: Match all of bindings/arm/npcm/ as part of NPCM architecture Jonathan Neuschäfer
2021-12-07 21:08 ` [PATCH v2 3/8] ARM: dts: wpcm450: Add global control registers (GCR) node Jonathan Neuschäfer
2021-12-07 21:08 ` [PATCH v2 4/8] dt-bindings: pinctrl: Add Nuvoton WPCM450 Jonathan Neuschäfer
2021-12-08 13:44   ` Rob Herring
2021-12-10 15:18   ` Rob Herring
2021-12-12 23:38     ` Jonathan Neuschäfer
2021-12-07 21:08 ` [PATCH v2 5/8] pinctrl: nuvoton: Add driver for WPCM450 Jonathan Neuschäfer
2021-12-08  0:51   ` kernel test robot
2021-12-08  2:34   ` kernel test robot
     [not found]   ` <CAHp75Vew=M_ofNM5pmeHtTJHXRUbbO4RrtgYAtLBznTBm3CS6Q@mail.gmail.com>
2021-12-08 13:58     ` Jonathan Neuschäfer
2021-12-08 14:14       ` Andy Shevchenko
2021-12-12 23:02         ` Jonathan Neuschäfer
2021-12-09  8:26       ` Zev Weiss
2021-12-10  1:41         ` Linus Walleij
2021-12-12 23:03           ` Jonathan Neuschäfer
2021-12-07 21:08 ` [PATCH v2 6/8] ARM: dts: wpcm450: Add pinctrl and GPIO nodes Jonathan Neuschäfer
2021-12-10  1:42   ` Linus Walleij
2021-12-07 21:08 ` [PATCH v2 7/8] ARM: dts: wpcm450: Add pin functions Jonathan Neuschäfer
2021-12-07 21:08 ` [PATCH v2 8/8] ARM: dts: wpcm450-supermicro-x9sci-ln4f: Add GPIO LEDs and buttons Jonathan Neuschäfer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YbNqKfwYes0rH07B@robh.at.kernel.org \
    --to=robh@kernel.org \
    --cc=avifishman70@gmail.com \
    --cc=benjaminfair@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=j.neuschaefer@gmx.net \
    --cc=joel@jms.id.au \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=openbmc@lists.ozlabs.org \
    --cc=tali.perry1@gmail.com \
    --cc=tmaimon77@gmail.com \
    --cc=venture@google.com \
    --cc=yuenn@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).