* [GIT PULL] intel-gpio for 5.19-1
@ 2022-04-29 18:27 Andy Shevchenko
2022-05-02 9:47 ` Bartosz Golaszewski
2022-05-04 21:17 ` Linus Walleij
0 siblings, 2 replies; 4+ messages in thread
From: Andy Shevchenko @ 2022-04-29 18:27 UTC (permalink / raw)
To: Linux GPIO; +Cc: Linus Walleij, Bartosz Golaszewski, Andy Shevchenko
Hi Linux GPIO maintainers,
Supposed to be an immutable tag to be included in GPIO and pin control subsystems.
Have been in Linux Next for a while w.o. any issues reported. Please, pull.
Thanks,
With Best Regards,
Andy Shevchenko
The following changes since commit 0c2cae09a765b1c1d842eb9328982976ec735926:
gpiolib: acpi: Convert type for pin to be unsigned (2022-04-08 15:13:22 +0300)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel.git tags/intel-gpio-v5.19-1
for you to fetch changes up to edc5601db66411a8c9c6b08b3aacf7e154a34c6d:
pinctrl: meson: Replace custom code by gpiochip_node_count() call (2022-04-18 16:18:52 +0300)
----------------------------------------------------------------
intel-gpio for v5.19-1
* Introduce helpers to iterate over GPIO chip nodes and covert some drivers
The following is an automated git shortlog grouped by driver:
gpiolib:
- Introduce a helper to get first GPIO controller node
- Introduce gpiochip_node_count() helper
- Introduce for_each_gpiochip_node() loop helper
pinctrl:
- meson: Replace custom code by gpiochip_node_count() call
- meson: Enable COMPILE_TEST
- meson: Rename REG_* to MESON_REG_*
- armada-37xx: Reuse GPIO fwnode in armada_37xx_irqchip_register()
- armada-37xx: Switch to use fwnode instead of of_node
- samsung: Switch to use for_each_gpiochip_node() helper
- samsung: Drop redundant node parameter in samsung_banks_of_node_get()
- npcm7xx: Switch to use for_each_gpiochip_node() helper
- renesas: rza1: Switch to use for_each_gpiochip_node() helper
- renesas: rza1: Replace custom code by gpiochip_node_count() call
- stm32: Switch to use for_each_gpiochip_node() helper
- stm32: Replace custom code by gpiochip_node_count() call
----------------------------------------------------------------
Andy Shevchenko (15):
gpiolib: Introduce for_each_gpiochip_node() loop helper
gpiolib: Introduce gpiochip_node_count() helper
pinctrl: stm32: Replace custom code by gpiochip_node_count() call
pinctrl: stm32: Switch to use for_each_gpiochip_node() helper
pinctrl: renesas: rza1: Replace custom code by gpiochip_node_count() call
pinctrl: renesas: rza1: Switch to use for_each_gpiochip_node() helper
pinctrl: npcm7xx: Switch to use for_each_gpiochip_node() helper
pinctrl: samsung: Drop redundant node parameter in samsung_banks_of_node_get()
pinctrl: samsung: Switch to use for_each_gpiochip_node() helper
gpiolib: Introduce a helper to get first GPIO controller node
pinctrl: armada-37xx: Switch to use fwnode instead of of_node
pinctrl: armada-37xx: Reuse GPIO fwnode in armada_37xx_irqchip_register()
pinctrl: meson: Rename REG_* to MESON_REG_*
pinctrl: meson: Enable COMPILE_TEST
pinctrl: meson: Replace custom code by gpiochip_node_count() call
drivers/pinctrl/meson/Kconfig | 2 +-
drivers/pinctrl/meson/pinctrl-meson.c | 52 +++++-----
drivers/pinctrl/meson/pinctrl-meson.h | 28 +++---
drivers/pinctrl/mvebu/pinctrl-armada-37xx.c | 34 ++-----
drivers/pinctrl/nuvoton/pinctrl-npcm7xx.c | 142 ++++++++++++----------------
drivers/pinctrl/renesas/pinctrl-rza1.c | 47 +++------
drivers/pinctrl/samsung/pinctrl-exynos.c | 8 +-
drivers/pinctrl/samsung/pinctrl-s3c24xx.c | 2 +-
drivers/pinctrl/samsung/pinctrl-s3c64xx.c | 4 +-
drivers/pinctrl/samsung/pinctrl-samsung.c | 30 +++---
drivers/pinctrl/samsung/pinctrl-samsung.h | 2 +-
drivers/pinctrl/stm32/pinctrl-stm32.c | 80 +++++++---------
include/linux/gpio/driver.h | 28 +++++-
13 files changed, 210 insertions(+), 249 deletions(-)
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [GIT PULL] intel-gpio for 5.19-1
2022-04-29 18:27 [GIT PULL] intel-gpio for 5.19-1 Andy Shevchenko
@ 2022-05-02 9:47 ` Bartosz Golaszewski
2022-05-04 21:17 ` Linus Walleij
1 sibling, 0 replies; 4+ messages in thread
From: Bartosz Golaszewski @ 2022-05-02 9:47 UTC (permalink / raw)
To: Andy Shevchenko; +Cc: Linux GPIO, Linus Walleij
On Fri, Apr 29, 2022 at 8:28 PM Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:
>
> Hi Linux GPIO maintainers,
>
> Supposed to be an immutable tag to be included in GPIO and pin control subsystems.
> Have been in Linux Next for a while w.o. any issues reported. Please, pull.
>
> Thanks,
>
> With Best Regards,
> Andy Shevchenko
>
> The following changes since commit 0c2cae09a765b1c1d842eb9328982976ec735926:
>
> gpiolib: acpi: Convert type for pin to be unsigned (2022-04-08 15:13:22 +0300)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel.git tags/intel-gpio-v5.19-1
>
> for you to fetch changes up to edc5601db66411a8c9c6b08b3aacf7e154a34c6d:
>
> pinctrl: meson: Replace custom code by gpiochip_node_count() call (2022-04-18 16:18:52 +0300)
>
> ----------------------------------------------------------------
> intel-gpio for v5.19-1
>
> * Introduce helpers to iterate over GPIO chip nodes and covert some drivers
>
> The following is an automated git shortlog grouped by driver:
>
> gpiolib:
> - Introduce a helper to get first GPIO controller node
> - Introduce gpiochip_node_count() helper
> - Introduce for_each_gpiochip_node() loop helper
>
> pinctrl:
> - meson: Replace custom code by gpiochip_node_count() call
> - meson: Enable COMPILE_TEST
> - meson: Rename REG_* to MESON_REG_*
> - armada-37xx: Reuse GPIO fwnode in armada_37xx_irqchip_register()
> - armada-37xx: Switch to use fwnode instead of of_node
> - samsung: Switch to use for_each_gpiochip_node() helper
> - samsung: Drop redundant node parameter in samsung_banks_of_node_get()
> - npcm7xx: Switch to use for_each_gpiochip_node() helper
> - renesas: rza1: Switch to use for_each_gpiochip_node() helper
> - renesas: rza1: Replace custom code by gpiochip_node_count() call
> - stm32: Switch to use for_each_gpiochip_node() helper
> - stm32: Replace custom code by gpiochip_node_count() call
>
> ----------------------------------------------------------------
> Andy Shevchenko (15):
> gpiolib: Introduce for_each_gpiochip_node() loop helper
> gpiolib: Introduce gpiochip_node_count() helper
> pinctrl: stm32: Replace custom code by gpiochip_node_count() call
> pinctrl: stm32: Switch to use for_each_gpiochip_node() helper
> pinctrl: renesas: rza1: Replace custom code by gpiochip_node_count() call
> pinctrl: renesas: rza1: Switch to use for_each_gpiochip_node() helper
> pinctrl: npcm7xx: Switch to use for_each_gpiochip_node() helper
> pinctrl: samsung: Drop redundant node parameter in samsung_banks_of_node_get()
> pinctrl: samsung: Switch to use for_each_gpiochip_node() helper
> gpiolib: Introduce a helper to get first GPIO controller node
> pinctrl: armada-37xx: Switch to use fwnode instead of of_node
> pinctrl: armada-37xx: Reuse GPIO fwnode in armada_37xx_irqchip_register()
> pinctrl: meson: Rename REG_* to MESON_REG_*
> pinctrl: meson: Enable COMPILE_TEST
> pinctrl: meson: Replace custom code by gpiochip_node_count() call
>
> drivers/pinctrl/meson/Kconfig | 2 +-
> drivers/pinctrl/meson/pinctrl-meson.c | 52 +++++-----
> drivers/pinctrl/meson/pinctrl-meson.h | 28 +++---
> drivers/pinctrl/mvebu/pinctrl-armada-37xx.c | 34 ++-----
> drivers/pinctrl/nuvoton/pinctrl-npcm7xx.c | 142 ++++++++++++----------------
> drivers/pinctrl/renesas/pinctrl-rza1.c | 47 +++------
> drivers/pinctrl/samsung/pinctrl-exynos.c | 8 +-
> drivers/pinctrl/samsung/pinctrl-s3c24xx.c | 2 +-
> drivers/pinctrl/samsung/pinctrl-s3c64xx.c | 4 +-
> drivers/pinctrl/samsung/pinctrl-samsung.c | 30 +++---
> drivers/pinctrl/samsung/pinctrl-samsung.h | 2 +-
> drivers/pinctrl/stm32/pinctrl-stm32.c | 80 +++++++---------
> include/linux/gpio/driver.h | 28 +++++-
> 13 files changed, 210 insertions(+), 249 deletions(-)
>
> --
> With Best Regards,
> Andy Shevchenko
>
>
Pulled, thanks!
Bart
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [GIT PULL] intel-gpio for 5.19-1
2022-04-29 18:27 [GIT PULL] intel-gpio for 5.19-1 Andy Shevchenko
2022-05-02 9:47 ` Bartosz Golaszewski
@ 2022-05-04 21:17 ` Linus Walleij
2022-05-05 11:12 ` Andy Shevchenko
1 sibling, 1 reply; 4+ messages in thread
From: Linus Walleij @ 2022-05-04 21:17 UTC (permalink / raw)
To: Andy Shevchenko; +Cc: Linux GPIO, Bartosz Golaszewski
On Fri, Apr 29, 2022 at 8:28 PM Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:
> Supposed to be an immutable tag to be included in GPIO and pin control subsystems.
> Have been in Linux Next for a while w.o. any issues reported. Please, pull.
Pulled into pinctrl as well, resolved the conflict by selecting your
version of the code in the stm32 driver. Please check the result!
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [GIT PULL] intel-gpio for 5.19-1
2022-05-04 21:17 ` Linus Walleij
@ 2022-05-05 11:12 ` Andy Shevchenko
0 siblings, 0 replies; 4+ messages in thread
From: Andy Shevchenko @ 2022-05-05 11:12 UTC (permalink / raw)
To: Linus Walleij; +Cc: Linux GPIO, Bartosz Golaszewski
On Wed, May 04, 2022 at 11:17:08PM +0200, Linus Walleij wrote:
> On Fri, Apr 29, 2022 at 8:28 PM Andy Shevchenko
> <andriy.shevchenko@linux.intel.com> wrote:
>
> > Supposed to be an immutable tag to be included in GPIO and pin control subsystems.
> > Have been in Linux Next for a while w.o. any issues reported. Please, pull.
>
> Pulled into pinctrl as well, resolved the conflict by selecting your
> version of the code in the stm32 driver. Please check the result!
Seems you need to add some pieces of code (one as far as I found, but I might
miss more). I think the resolution Stephen Rothwell made is correct, but not
yours.
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2022-05-05 11:12 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2022-04-29 18:27 [GIT PULL] intel-gpio for 5.19-1 Andy Shevchenko
2022-05-02 9:47 ` Bartosz Golaszewski
2022-05-04 21:17 ` Linus Walleij
2022-05-05 11:12 ` Andy Shevchenko
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).