From: William McVicker <willmcvicker@google.com>
To: Peter Griffin <peter.griffin@linaro.org>
Cc: robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
mturquette@baylibre.com, conor+dt@kernel.org, sboyd@kernel.org,
tomasz.figa@gmail.com, s.nawrocki@samsung.com,
linus.walleij@linaro.org, wim@linux-watchdog.org,
linux@roeck-us.net, catalin.marinas@arm.com, will@kernel.org,
arnd@arndb.de, olof@lixom.net, gregkh@linuxfoundation.org,
cw00.choi@samsung.com, tudor.ambarus@linaro.org,
andre.draszik@linaro.org, semen.protsenko@linaro.org,
saravanak@google.com, soc@kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-clk@vger.kernel.org,
linux-gpio@vger.kernel.org, linux-watchdog@vger.kernel.org,
kernel-team@android.com, linux-serial@vger.kernel.org
Subject: Re: [PATCH v3 09/20] clk: samsung: clk-pll: Add support for pll_{0516,0517,518}
Date: Wed, 11 Oct 2023 14:49:56 -0700 [thread overview]
Message-ID: <ZScYhAUn76ceCRJb@google.com> (raw)
In-Reply-To: <20231011184823.443959-10-peter.griffin@linaro.org>
On 10/11/2023, Peter Griffin wrote:
> These plls are found in the Tensor gs101 SoC found in the Pixel 6.
>
> pll0516x: Integer PLL with high frequency
> pll0517x: Integer PLL with middle frequency
> pll0518x: Integer PLL with low frequency
>
> PLL0516x
> FOUT = (MDIV * 2 * FIN)/PDIV * 2^SDIV)
>
> PLL0517x and PLL0518x
> FOUT = (MDIV * FIN)/PDIV*2^SDIV)
>
> The PLLs are similar enough to pll_0822x that the same code can handle
> both. The main difference is the change in the fout formula for the
> high frequency 0516 pll.
>
> Locktime for 516,517 & 518 is 150 the same as the pll_0822x lock factor.
> MDIV, SDIV PDIV masks and bit shifts are also the same as 0822x.
>
> When defining the PLL the "con" parameter should be set to CON3
> register, like this
>
> PLL(pll_0517x, CLK_FOUT_SHARED0_PLL, "fout_shared0_pll", "oscclk",
> PLL_LOCKTIME_PLL_SHARED0, PLL_CON3_PLL_SHARED0,
> NULL),
>
> Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Tested-by: Will McVicker <willmcvicker@google.com>
Thanks,
Will
> ---
> drivers/clk/samsung/clk-pll.c | 9 ++++++++-
> drivers/clk/samsung/clk-pll.h | 3 +++
> 2 files changed, 11 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/clk/samsung/clk-pll.c b/drivers/clk/samsung/clk-pll.c
> index 74934c6182ce..4ef9fea2a425 100644
> --- a/drivers/clk/samsung/clk-pll.c
> +++ b/drivers/clk/samsung/clk-pll.c
> @@ -442,7 +442,11 @@ static unsigned long samsung_pll0822x_recalc_rate(struct clk_hw *hw,
> pdiv = (pll_con3 >> PLL0822X_PDIV_SHIFT) & PLL0822X_PDIV_MASK;
> sdiv = (pll_con3 >> PLL0822X_SDIV_SHIFT) & PLL0822X_SDIV_MASK;
>
> - fvco *= mdiv;
> + if (pll->type == pll_0516x)
> + fvco = fvco * 2 * mdiv;
> + else
> + fvco *= mdiv;
> +
> do_div(fvco, (pdiv << sdiv));
>
> return (unsigned long)fvco;
> @@ -1316,6 +1320,9 @@ static void __init _samsung_clk_register_pll(struct samsung_clk_provider *ctx,
> case pll_1417x:
> case pll_0818x:
> case pll_0822x:
> + case pll_0516x:
> + case pll_0517x:
> + case pll_0518x:
> pll->enable_offs = PLL0822X_ENABLE_SHIFT;
> pll->lock_offs = PLL0822X_LOCK_STAT_SHIFT;
> if (!pll->rate_table)
> diff --git a/drivers/clk/samsung/clk-pll.h b/drivers/clk/samsung/clk-pll.h
> index 0725d485c6ee..ffd3d52c0dec 100644
> --- a/drivers/clk/samsung/clk-pll.h
> +++ b/drivers/clk/samsung/clk-pll.h
> @@ -38,6 +38,9 @@ enum samsung_pll_type {
> pll_0822x,
> pll_0831x,
> pll_142xx,
> + pll_0516x,
> + pll_0517x,
> + pll_0518x,
> };
>
> #define PLL_RATE(_fin, _m, _p, _s, _k, _ks) \
> --
> 2.42.0.655.g421f12c284-goog
>
next prev parent reply other threads:[~2023-10-11 21:50 UTC|newest]
Thread overview: 100+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-11 18:48 [PATCH v3 00/20] Add minimal Tensor/GS101 SoC support and Oriole/Pixel6 board Peter Griffin
2023-10-11 18:48 ` [PATCH v3 01/20] dt-bindings: soc: samsung: exynos-pmu: Add gs101 compatible Peter Griffin
2023-10-11 18:54 ` Sam Protsenko
2023-10-11 18:48 ` [PATCH v3 02/20] dt-bindings: clock: Add Google gs101 clock management unit bindings Peter Griffin
2023-10-11 21:48 ` William McVicker
2023-10-12 6:07 ` Krzysztof Kozlowski
2023-10-12 8:56 ` Peter Griffin
2023-10-12 9:36 ` Krzysztof Kozlowski
2023-10-12 10:45 ` Peter Griffin
2023-10-12 11:33 ` Krzysztof Kozlowski
2023-10-12 16:41 ` William McVicker
2023-10-11 22:55 ` Sam Protsenko
2023-10-12 6:11 ` Krzysztof Kozlowski
2023-10-12 10:15 ` Peter Griffin
2023-10-12 10:20 ` Krzysztof Kozlowski
2023-10-12 10:39 ` Peter Griffin
2023-10-11 18:48 ` [PATCH v3 03/20] dt-bindings: soc: google: exynos-sysreg: add dedicated SYSREG compatibles to GS101 Peter Griffin
2023-10-11 22:56 ` Sam Protsenko
2023-10-16 13:36 ` Rob Herring
2023-10-19 13:10 ` Peter Griffin
2023-10-11 18:48 ` [PATCH v3 04/20] dt-bindings: watchdog: Document Google gs101 & gs201 watchdog bindings Peter Griffin
2023-10-11 22:57 ` Sam Protsenko
2023-10-12 10:56 ` Peter Griffin
2023-10-11 18:48 ` [PATCH v3 05/20] dt-bindings: arm: google: Add bindings for Google ARM platforms Peter Griffin
2023-10-11 23:06 ` Sam Protsenko
2023-10-12 11:19 ` Peter Griffin
2023-10-11 18:48 ` [PATCH v3 06/20] dt-bindings: pinctrl: samsung: add google,gs101-pinctrl compatible Peter Griffin
2023-10-11 23:10 ` Sam Protsenko
2023-10-16 13:41 ` Rob Herring
2023-11-07 12:18 ` Peter Griffin
2023-10-11 18:48 ` [PATCH v3 07/20] dt-bindings: pinctrl: samsung: add gs101-wakeup-eint compatible Peter Griffin
2023-10-12 6:13 ` Krzysztof Kozlowski
2023-10-11 18:48 ` [PATCH v3 08/20] dt-bindings: serial: samsung: Add google-gs101-uart compatible Peter Griffin
2023-10-11 23:13 ` Sam Protsenko
2023-10-11 18:48 ` [PATCH v3 09/20] clk: samsung: clk-pll: Add support for pll_{0516,0517,518} Peter Griffin
2023-10-11 21:49 ` William McVicker [this message]
2023-10-11 23:19 ` Sam Protsenko
2023-10-12 11:50 ` Peter Griffin
[not found] ` <ef25ed87-f065-4a75-9e57-1f1073d9c805@kernel.org>
2023-10-17 20:39 ` Peter Griffin
2023-10-11 18:48 ` [PATCH v3 10/20] clk: samsung: clk-gs101: Add cmu_top registers, plls, mux and gates Peter Griffin
2023-10-11 21:50 ` William McVicker
2023-10-12 0:06 ` Sam Protsenko
2023-10-12 12:06 ` Peter Griffin
2023-10-12 12:24 ` Krzysztof Kozlowski
2023-10-12 13:52 ` Peter Griffin
[not found] ` <aae4e6cd-dcfc-442d-9ed7-d5a73c419ba8@kernel.org>
2023-11-07 13:57 ` Peter Griffin
2023-11-08 17:33 ` Sam Protsenko
2023-12-01 13:59 ` Peter Griffin
2023-10-11 18:48 ` [PATCH v3 11/20] clk: samsung: clk-gs101: add CMU_APM support Peter Griffin
2023-10-11 21:50 ` William McVicker
2023-10-12 0:10 ` Sam Protsenko
2023-10-11 18:48 ` [PATCH v3 12/20] clk: samsung: clk-gs101: Add support for CMU_MISC clock unit Peter Griffin
2023-10-11 21:51 ` William McVicker
2023-10-12 0:12 ` Sam Protsenko
2023-10-12 16:02 ` Peter Griffin
2023-10-11 18:48 ` [PATCH v3 13/20] pinctrl: samsung: Add filter selection support for alive banks Peter Griffin
2023-10-11 21:51 ` William McVicker
2023-10-11 22:47 ` Sam Protsenko
2023-10-20 13:54 ` Peter Griffin
2023-10-11 18:48 ` [PATCH v3 14/20] pinctrl: samsung: Add gs101 SoC pinctrl configuration Peter Griffin
2023-10-11 21:52 ` William McVicker
2023-10-11 21:53 ` William McVicker
2023-10-12 5:59 ` Sam Protsenko
2023-11-08 13:43 ` Peter Griffin
2023-10-11 18:48 ` [PATCH v3 15/20] watchdog: s3c2410_wdt: Add support for Google tensor SoCs Peter Griffin
2023-10-11 21:20 ` Guenter Roeck
2023-10-17 21:26 ` Peter Griffin
2023-10-12 2:32 ` Sam Protsenko
2023-10-17 21:39 ` Peter Griffin
2023-10-12 6:22 ` Krzysztof Kozlowski
2023-10-11 18:48 ` [PATCH v3 16/20] tty: serial: samsung: Add gs101 compatible and SoC data Peter Griffin
2023-10-11 21:54 ` William McVicker
2023-10-12 5:38 ` Sam Protsenko
2023-10-12 6:07 ` Arnd Bergmann
2023-10-20 21:47 ` Peter Griffin
2023-10-12 6:26 ` Krzysztof Kozlowski
2023-10-12 14:03 ` Peter Griffin
2023-10-12 14:10 ` Krzysztof Kozlowski
2023-10-11 18:48 ` [PATCH v3 17/20] arm64: dts: google: Add initial Google gs101 SoC support Peter Griffin
2023-10-11 21:55 ` William McVicker
2023-10-12 6:40 ` Krzysztof Kozlowski
2023-11-24 23:22 ` Peter Griffin
2023-11-28 8:58 ` Krzysztof Kozlowski
2023-10-12 6:44 ` Krzysztof Kozlowski
2023-11-24 23:53 ` Peter Griffin
2023-10-12 7:23 ` Sam Protsenko
2023-10-12 7:39 ` Krzysztof Kozlowski
2023-11-28 22:43 ` Peter Griffin
2023-10-11 18:48 ` [PATCH v3 18/20] arm64: dts: google: Add initial Oriole/pixel 6 board support Peter Griffin
2023-10-11 21:55 ` William McVicker
2023-10-12 6:44 ` Krzysztof Kozlowski
2023-10-12 7:40 ` Sam Protsenko
2023-10-11 18:48 ` [PATCH v3 19/20] arm64: defconfig: Enable Google Tensor SoC Peter Griffin
2023-10-11 21:56 ` William McVicker
2023-10-12 6:15 ` Sam Protsenko
2023-10-11 18:48 ` [PATCH v3 20/20] MAINTAINERS: add entry for " Peter Griffin
2023-10-12 6:02 ` Sam Protsenko
2023-10-11 21:58 ` [PATCH v3 00/20] Add minimal Tensor/GS101 SoC support and Oriole/Pixel6 board William McVicker
2023-10-11 22:51 ` Sam Protsenko
2023-10-12 6:28 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZScYhAUn76ceCRJb@google.com \
--to=willmcvicker@google.com \
--cc=andre.draszik@linaro.org \
--cc=arnd@arndb.de \
--cc=catalin.marinas@arm.com \
--cc=conor+dt@kernel.org \
--cc=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=kernel-team@android.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=mturquette@baylibre.com \
--cc=olof@lixom.net \
--cc=peter.griffin@linaro.org \
--cc=robh+dt@kernel.org \
--cc=s.nawrocki@samsung.com \
--cc=saravanak@google.com \
--cc=sboyd@kernel.org \
--cc=semen.protsenko@linaro.org \
--cc=soc@kernel.org \
--cc=tomasz.figa@gmail.com \
--cc=tudor.ambarus@linaro.org \
--cc=will@kernel.org \
--cc=wim@linux-watchdog.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).