Linux GPIO subsystem development
 help / color / mirror / Atom feed
From: Frank Li <Frank.li@oss.nxp.com>
To: "Peng Fan (OSS)" <peng.fan@oss.nxp.com>
Cc: Linus Walleij <linusw@kernel.org>,
	Bartosz Golaszewski <brgl@kernel.org>,
	Frank Li <Frank.Li@nxp.com>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	Shenwei Wang <shenwei.wang@nxp.com>,
	Andy Shevchenko <andy.shevchenko@gmail.com>,
	linux-gpio@vger.kernel.org, imx@lists.linux.dev,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, Peng Fan <peng.fan@nxp.com>
Subject: Re: [PATCH v4 04/10] gpio: mxc: replace of_device_is_compatible() with hwdata flags
Date: Thu, 8 Oct 2026 15:05:14 -0500	[thread overview]
Message-ID: <asf3esVzUN2sNU2y@SMW015318> (raw)
In-Reply-To: <20261007-gpio-mxc-cleanup-v4-4-c9f5a8b50df9@nxp.com>

On Wed, Oct 07, 2026 at 06:44:19PM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
>
> Replace the runtime of_device_is_compatible() check for "fsl,imx7d-gpio"
> with a flags field in mxc_gpio_hwdata to move the power-off capability
> from a per-instance bool populated at probe time to static per-compatible
> data.
>
> Introduce MXC_GPIO_HAS_POWER_OFF and a dedicated imx7d_gpio_hwdata
> instance that carries it, along with a mxc_gpio_has_power_off() helper
> that replaces every former port->power_off test.
>
> While at it, factor the register offsets shared by imx35 and imx7d into
> a MXC_GPIO_HW_DATA_COMMON macro to avoid duplicating twelve identical
> initializers.
>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---

Reviewed-by: Frank Li <Frank.Li@nxp.com>


>  drivers/gpio/gpio-mxc.c | 50 ++++++++++++++++++++++++++++++-------------------
>  1 file changed, 31 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
> index 1ff5c2afb2e8..c08f0b59d284 100644
> --- a/drivers/gpio/gpio-mxc.c
> +++ b/drivers/gpio/gpio-mxc.c
> @@ -33,6 +33,8 @@
>  #define IMX_SCU_WAKEUP_RISE_EDGE	6
>  #define IMX_SCU_WAKEUP_HIGH_LVL		7
>
> +#define MXC_GPIO_HAS_POWER_OFF		BIT(0)
> +
>  /* device type dependent stuff */
>  struct mxc_gpio_hwdata {
>  	unsigned dr_reg;
> @@ -47,6 +49,7 @@ struct mxc_gpio_hwdata {
>  	unsigned high_level;
>  	unsigned rise_edge;
>  	unsigned fall_edge;
> +	unsigned int flags;
>  };
>
>  struct mxc_gpio_reg_saved {
> @@ -70,13 +73,26 @@ struct mxc_gpio_port {
>  	struct device *dev;
>  	u32 both_edges;
>  	struct mxc_gpio_reg_saved gpio_saved_reg;
> -	bool power_off;
>  	bool is_pad_wakeup;
>  	unsigned long wakeup_pads;
>  	u32 pad_type[32];
>  	const struct mxc_gpio_hwdata *hwdata;
>  };
>
> +#define MXC_GPIO_HW_DATA_COMMON	\
> +	.dr_reg		= 0x00,	\
> +	.gdir_reg	= 0x04,	\
> +	.psr_reg	= 0x08,	\
> +	.icr1_reg	= 0x0c,	\
> +	.icr2_reg	= 0x10,	\
> +	.imr_reg	= 0x14,	\
> +	.isr_reg	= 0x18,	\
> +	.edge_sel_reg	= 0x1c,	\
> +	.low_level	= 0x00,	\
> +	.high_level	= 0x01,	\
> +	.rise_edge	= 0x02,	\
> +	.fall_edge	= 0x03
> +
>  static struct mxc_gpio_hwdata imx1_imx21_gpio_hwdata = {
>  	.dr_reg		= 0x1c,
>  	.gdir_reg	= 0x00,
> @@ -108,20 +124,19 @@ static struct mxc_gpio_hwdata imx31_gpio_hwdata = {
>  };
>
>  static struct mxc_gpio_hwdata imx35_gpio_hwdata = {
> -	.dr_reg		= 0x00,
> -	.gdir_reg	= 0x04,
> -	.psr_reg	= 0x08,
> -	.icr1_reg	= 0x0c,
> -	.icr2_reg	= 0x10,
> -	.imr_reg	= 0x14,
> -	.isr_reg	= 0x18,
> -	.edge_sel_reg	= 0x1c,
> -	.low_level	= 0x00,
> -	.high_level	= 0x01,
> -	.rise_edge	= 0x02,
> -	.fall_edge	= 0x03,
> +	MXC_GPIO_HW_DATA_COMMON,
> +};
> +
> +static struct mxc_gpio_hwdata imx7d_gpio_hwdata = {
> +	MXC_GPIO_HW_DATA_COMMON,
> +	.flags = MXC_GPIO_HAS_POWER_OFF,
>  };
>
> +static inline bool mxc_gpio_has_power_off(struct mxc_gpio_port *port)
> +{
> +	return port->hwdata->flags & MXC_GPIO_HAS_POWER_OFF;
> +}
> +
>  #define GPIO_DR			(port->hwdata->dr_reg)
>  #define GPIO_GDIR		(port->hwdata->gdir_reg)
>  #define GPIO_PSR		(port->hwdata->psr_reg)
> @@ -142,7 +157,7 @@ static const struct of_device_id mxc_gpio_dt_ids[] = {
>  	{ .compatible = "fsl,imx21-gpio", .data = &imx1_imx21_gpio_hwdata },
>  	{ .compatible = "fsl,imx31-gpio", .data = &imx31_gpio_hwdata },
>  	{ .compatible = "fsl,imx35-gpio", .data = &imx35_gpio_hwdata },
> -	{ .compatible = "fsl,imx7d-gpio", .data = &imx35_gpio_hwdata },
> +	{ .compatible = "fsl,imx7d-gpio", .data = &imx7d_gpio_hwdata },
>  	{ .compatible = "fsl,imx8dxl-gpio", .data = &imx35_gpio_hwdata },
>  	{ .compatible = "fsl,imx8qm-gpio", .data = &imx35_gpio_hwdata },
>  	{ .compatible = "fsl,imx8qxp-gpio", .data = &imx35_gpio_hwdata },
> @@ -447,9 +462,6 @@ static int mxc_gpio_probe(struct platform_device *pdev)
>  	if (IS_ERR(port->clk))
>  		return PTR_ERR(port->clk);
>
> -	if (of_device_is_compatible(np, "fsl,imx7d-gpio"))
> -		port->power_off = true;
> -
>  	pm_runtime_get_noresume(&pdev->dev);
>  	pm_runtime_set_active(&pdev->dev);
>  	pm_runtime_enable(&pdev->dev);
> @@ -536,7 +548,7 @@ static int mxc_gpio_probe(struct platform_device *pdev)
>
>  static void mxc_gpio_save_regs(struct mxc_gpio_port *port)
>  {
> -	if (!port->power_off)
> +	if (!mxc_gpio_has_power_off(port))
>  		return;
>
>  	port->gpio_saved_reg.icr1 = readl(port->base + GPIO_ICR1);
> @@ -549,7 +561,7 @@ static void mxc_gpio_save_regs(struct mxc_gpio_port *port)
>
>  static void mxc_gpio_restore_regs(struct mxc_gpio_port *port)
>  {
> -	if (!port->power_off)
> +	if (!mxc_gpio_has_power_off(port))
>  		return;
>
>  	writel(port->gpio_saved_reg.icr1, port->base + GPIO_ICR1);
>
> --
> 2.51.0
>
>

  reply	other threads:[~2026-10-08 20:05 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-07 10:44 [PATCH v4 00/10] gpio: mxc: bug fixes and probe cleanup Peng Fan (OSS)
2026-10-07 10:44 ` [PATCH v4 01/10] gpio: mxc: fix race between chained IRQ handler install and probe completion Peng Fan (OSS)
2026-10-07 10:57   ` sashiko-bot
2026-10-08  9:44     ` Bartosz Golaszewski
2026-10-09  0:57       ` Peng Fan
2026-10-07 10:44 ` [PATCH v4 02/10] gpio: mxc: fix wakeup_pads bit operations Peng Fan (OSS)
2026-10-08 19:59   ` Frank Li
2026-10-09  0:59     ` Peng Fan
2026-10-07 10:44 ` [PATCH v4 03/10] gpio: mxc: use for_each_set_bit() to iterate wakeup pads Peng Fan (OSS)
2026-10-08 20:00   ` Frank Li
2026-10-07 10:44 ` [PATCH v4 04/10] gpio: mxc: replace of_device_is_compatible() with hwdata flags Peng Fan (OSS)
2026-10-08 20:05   ` Frank Li [this message]
2026-10-07 10:44 ` [PATCH v4 05/10] gpio: mxc: convert pad wakeup compatible checks to " Peng Fan (OSS)
2026-10-08 20:10   ` Frank Li
2026-10-09  1:00     ` Peng Fan
2026-10-07 10:44 ` [PATCH v4 06/10] gpio: mxc: convert probe error handling to devres Peng Fan (OSS)
2026-10-07 10:59   ` sashiko-bot
2026-10-08  9:47     ` Bartosz Golaszewski
2026-10-09  2:25       ` Peng Fan
2026-10-08 20:12   ` Frank Li
2026-10-09  2:18     ` Peng Fan
2026-10-07 10:44 ` [PATCH v4 07/10] gpio: mxc: switch probe error paths to dev_err_probe() Peng Fan (OSS)
2026-10-07 11:02   ` sashiko-bot
2026-10-08 20:15   ` Frank Li
2026-10-07 10:44 ` [PATCH v4 08/10] gpio: mxc: use local dev variable Peng Fan (OSS)
2026-10-07 11:03   ` sashiko-bot
2026-10-08 20:16   ` Frank Li
2026-10-07 10:44 ` [PATCH v4 09/10] gpio: mxc: introduce MXC_ICR macros and use field_prep/field_get Peng Fan (OSS)
2026-10-08 20:25   ` Frank Li
2026-10-07 10:44 ` [PATCH v4 10/10] gpio: mxc: use BIT() macro for single-bit operations Peng Fan (OSS)
2026-10-07 10:56   ` sashiko-bot
2026-10-09  2:32     ` Peng Fan
2026-10-08 20:26   ` Frank Li

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=asf3esVzUN2sNU2y@SMW015318 \
    --to=frank.li@oss.nxp.com \
    --cc=Frank.Li@nxp.com \
    --cc=andy.shevchenko@gmail.com \
    --cc=brgl@kernel.org \
    --cc=festevam@gmail.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=linusw@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=peng.fan@nxp.com \
    --cc=peng.fan@oss.nxp.com \
    --cc=s.hauer@pengutronix.de \
    --cc=shenwei.wang@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox