From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 3EF2CC433EF for ; Mon, 18 Jul 2022 14:08:07 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S235263AbiGROIG (ORCPT ); Mon, 18 Jul 2022 10:08:06 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:34310 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230107AbiGROIG (ORCPT ); Mon, 18 Jul 2022 10:08:06 -0400 Received: from mail-lf1-x12d.google.com (mail-lf1-x12d.google.com [IPv6:2a00:1450:4864:20::12d]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id A5F672613B for ; Mon, 18 Jul 2022 07:08:04 -0700 (PDT) Received: by mail-lf1-x12d.google.com with SMTP id o7so19501054lfq.9 for ; Mon, 18 Jul 2022 07:08:04 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=message-id:date:mime-version:user-agent:subject:content-language:to :cc:references:from:in-reply-to:content-transfer-encoding; bh=1JhvfwSerHJevbTjrgxZbFc36NslbyY4GFSoZTR74vE=; b=KE4D7qn9+mLkdL+4PkRQfxtQE9O4A17G+yqAJMBftSCdle6r2WivRGDH0OP4jDKB6L pQJV/tF8SiQ8QXpTy2X2gMpKkPOLwQonvFwaIGenPNyRcGwK+3XxYayUq/FYpxpG+59c D4pUDJMNV8sct8Slunl3k2nn3qiIpniVArOjeOApmXFo4Z32TbZDpg+qdb6+zIftoW0t nCYWhUTsSCvo8+AiHmcIh1ctAKjLAyweaETE015yUGO8TYEnjV+MyS2j//vxdpJHR9nU G58cYD/ATYHKnEm2R+sKAMn7ttduhjJnNDkBLULFUSP6W1Vzyn7TBjWi1Ht1Kxstu1/P +z6Q== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:message-id:date:mime-version:user-agent:subject :content-language:to:cc:references:from:in-reply-to :content-transfer-encoding; bh=1JhvfwSerHJevbTjrgxZbFc36NslbyY4GFSoZTR74vE=; b=pXsRlOdcJdNIiftrRa0VA1vez+WwJnLN8dz5PlnseZmA2lpYOi31lHcBjrRrcQs//F q6caPPAmW7meqIbl29c296buGjQr5zFSh2PQxssIsfZXKCJnMDRU0mDsxfvZ2aaD1Uia UdDs4meh+zCXMSzYta4G5fAfZztXkbv2zoSrpm+I8ApEWZNB//bV6hDkjezY5xg2YWKF /nr56UlVoOOtcNvgirZb4z9ili/VXNy4VMzDbufl3nnVdL6RPIC3K+6KWgfskk299lCg 2hUsWSWlMwfyzYLa+IclXqPmXNydj4/nX3/qg4O3Vk2NVC3+lKzwsa7QkSHRr6dh2dSb zN2Q== X-Gm-Message-State: AJIora+2EnLUBH4UqiGAnTWIvABCGinKL3/ayUXpafGZm59KqfLhsl94 2Xw6735exoxfH03xKNt8rY6cLQ== X-Google-Smtp-Source: AGRyM1uA4X1ZcNACiUgMDBusnkLTOMJZhCjYj6GvRd0e8+DzhcDNpPkzzbvd/GVjQgAW+wjhDtT2yg== X-Received: by 2002:a05:6512:4022:b0:48a:2c31:f26a with SMTP id br34-20020a056512402200b0048a2c31f26amr6529963lfb.94.1658153282930; Mon, 18 Jul 2022 07:08:02 -0700 (PDT) Received: from [192.168.115.193] (89-162-31-138.fiber.signal.no. [89.162.31.138]) by smtp.gmail.com with ESMTPSA id n3-20020a05651203e300b00485e55192a3sm2404605lfq.72.2022.07.18.07.08.01 (version=TLS1_3 cipher=TLS_AES_128_GCM_SHA256 bits=128/128); Mon, 18 Jul 2022 07:08:02 -0700 (PDT) Message-ID: Date: Mon, 18 Jul 2022 16:08:00 +0200 MIME-Version: 1.0 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:91.0) Gecko/20100101 Thunderbird/91.11.0 Subject: Re: [PATCH 1/3] dt-bindings: mediatek: add pinctrl definition for mt8188 Content-Language: en-US To: Hui Liu , linus.walleij@linaro.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, matthias.bgg@gmail.com Cc: srv_heupstream@mediatek.com, johnson.wang@mediatek.com, zhiyong.tao@mediatek.com, sean.wang@mediatek.com, linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org References: <20220718113813.23787-1-hui.liu@mediatek.com> <20220718113813.23787-2-hui.liu@mediatek.com> From: Krzysztof Kozlowski In-Reply-To: <20220718113813.23787-2-hui.liu@mediatek.com> Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Precedence: bulk List-ID: X-Mailing-List: linux-gpio@vger.kernel.org On 18/07/2022 13:38, Hui Liu wrote: > From: "Hui.Liu" > > This commit adds mt8188 compatible node in binding document. > > Signed-off-by: Hui.Liu > --- > .../bindings/pinctrl/pinctrl-mt8188.yaml | 306 ++++++++++++++++++ > 1 file changed, 306 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-mt8188.yaml > > diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8188.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8188.yaml > new file mode 100644 > index 000000000000..43cc2424107f > --- /dev/null > +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8188.yaml vendor,soc-ip so: mediatek,mt8188-pinctrl.yaml > @@ -0,0 +1,306 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/pinctrl/pinctrl-mt8188.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: MediaTek MT8188 Pin Controller > + > +maintainers: > + - Sean Wang > + > +description: | > + The MediaTek's Pin controller is used to control SoC pins. Too generic description. Just drop it or make it useful. > + > +properties: > + compatible: > + const: mediatek,mt8188-pinctrl > + > + gpio-controller: true > + > + '#gpio-cells': > + description: | > + Number of cells in GPIO specifier. Since the generic GPIO binding is used, > + the amount of cells must be specified as 2. See the below > + mentioned gpio binding representation for description of particular cells. Comment does not make sense. > + const: 2 > + > + gpio-ranges: > + description: gpio valid number range. Redundant description, skip it. > + maxItems: 1 > + > + reg: > + description: | > + Physical address base for gpio base registers. There are 8 GPIO > + physical address base in mt8188. Redundant description, skip it. You should list the instead and describe each of it. > + maxItems: 8 > + > + reg-names: > + description: | > + Gpio base register names. Redundant description, skip it. > + maxItems: 8 You need to list the items instead. > + > + interrupt-controller: true > + > + '#interrupt-cells': > + const: 2 > + > + interrupts: > + description: The interrupt outputs to sysirq. > + maxItems: 1 > + > + mediatek,rsel_resistance_in_si_unit: No underscores in property names. > + type: boolean > + description: | > + Identifying i2c pins pull up/down type which is RSEL. It can support > + RSEL define or si unit value(ohm) to set different resistance. I cannot understand this description. > + > +# PIN CONFIGURATION NODES > +patternProperties: > + '-pins$': > + type: object > + additionalProperties: false Blank line. Missing ref to proper generic pinctrl schema. > + patternProperties: > + '^pins': > + type: object > + additionalProperties: false Blank line. Missing ref to proper generic pinctrl schema. > + description: | > + A pinctrl node should contain at least one subnodes representing the > + pinctrl groups available on the machine. Each subnode will list the > + pins it needs, and how they should be configured, with regard to muxer > + configuration, pullups, drive strength, input enable/disable and > + input schmitt. > + An example of using macro: > + pincontroller { > + /* GPIO0 set as multifunction GPIO0 */ > + gpio-pins { > + pins { > + pinmux = ; > + } > + }; > + /* GPIO56 set as multifunction SDA0 */ > + i2c0-pins { > + pins { > + pinmux = ; > + } > + }; Drop the code from here. Put it in example. > + }; > + $ref: "pinmux-node.yaml" Oh, why it's here. This should be just after type. > + > + properties: > + pinmux: > + description: | > + Integer array, represents gpio pin number and mux setting. > + Supported pin number and mux varies for different SoCs, and are > + defined as macros in dt-bindings/pinctrl/-pinfunc.h > + directly. > + > + drive-strength: > + enum: [2, 4, 6, 8, 10, 12, 14, 16] > + > + mediatek,drive-strength-adv: > + description: | > + Describe the specific driving setup property. > + For I2C pins, the existing generic driving setup can only support > + 2/4/6/8/10/12/14/16mA driving. But in specific driving setup, they > + can support 0.125/0.25/0.5/1mA adjustment. If we enable specific > + driving setup, the existing generic setup will be disabled. > + The specific driving setup is controlled by E1E0EN. > + When E1=0/E0=0, the strength is 0.125mA. > + When E1=0/E0=1, the strength is 0.25mA. > + When E1=1/E0=0, the strength is 0.5mA. > + When E1=1/E0=1, the strength is 1mA. > + EN is used to enable or disable the specific driving setup. > + Valid arguments are described as below: > + 0: (E1, E0, EN) = (0, 0, 0) > + 1: (E1, E0, EN) = (0, 0, 1) > + 2: (E1, E0, EN) = (0, 1, 0) > + 3: (E1, E0, EN) = (0, 1, 1) > + 4: (E1, E0, EN) = (1, 0, 0) > + 5: (E1, E0, EN) = (1, 0, 1) > + 6: (E1, E0, EN) = (1, 1, 0) > + 7: (E1, E0, EN) = (1, 1, 1) > + So the valid arguments are from 0 to 7. > + $ref: /schemas/types.yaml#/definitions/uint32 > + enum: [0, 1, 2, 3, 4, 5, 6, 7] No. Use logical units instead, so this should be either mA, no register hard-coding in the bindings. > + > + bias-pull-down: > + oneOf: > + - type: boolean > + - enum: [100, 101, 102, 103] > + description: mt8188 pull down PUPD/R0/R1 type define value. > + - enum: [200, 201, 202, 203, 204, 205, 206, 207] > + description: mt8188 pull down RSEL type define value. > + - enum: [75000, 5000] > + description: mt8188 pull down RSEL type si unit value(ohm). > + description: | > + For pull down type is normal, it don't need add RSEL & R1R0 define > + and resistance value. > + For pull down type is PUPD/R0/R1 type, it can add R1R0 define to > + set different resistance. It can support "MTK_PUPD_SET_R1R0_00" & > + "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & > + "MTK_PUPD_SET_R1R0_11" define in mt8188. > + For pull down type is RSEL, it can add RSEL define & resistance > + value(ohm) to set different resistance by identifying property > + "mediatek,rsel_resistance_in_si_unit". > + It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" > + & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" > + & "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101" > + & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111" > + define in mt8188. It can also support resistance value(ohm) > + "75000" & "5000" in mt8188. > + > + An example of using RSEL define: > + pincontroller { > + i2c0_pin { > + pins { > + pinmux = ; > + bias-pull-updown = ; > + } > + }; > + }; > + An example of using si unit resistance value(ohm): > + &pio { > + mediatek,rsel_resistance_in_si_unit; > + } > + pincontroller { > + i2c0_pin { > + pins { > + pinmux = ; > + bias-pull-down = <75000>; > + } > + }; > + }; To the example. > + > + bias-pull-up: > + oneOf: > + - type: boolean > + - enum: [100, 101, 102, 103] > + description: mt8188 pull up PUPD/R0/R1 type define value. > + - enum: [200, 201, 202, 203, 204, 205, 206, 207] > + description: mt8188 pull up RSEL type define value. > + - enum: [1000, 1500, 2000, 3000, 4000, 5000, 10000, 75000] > + description: mt8188 pull up RSEL type si unit value(ohm). > + description: | > + For pull up type is normal, it don't need add RSEL & R1R0 define > + and resistance value. > + For pull up type is PUPD/R0/R1 type, it can add R1R0 define to > + set different resistance. It can support "MTK_PUPD_SET_R1R0_00" & > + "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & > + "MTK_PUPD_SET_R1R0_11" define in mt8188. > + For pull up type is RSEL, it can add RSEL define & resistance > + value(ohm) to set different resistance by identifying property > + "mediatek,rsel_resistance_in_si_unit". > + It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" > + & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" > + & "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101" > + & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111" > + define in mt8188. It can also support resistance value(ohm) > + "1000" & "1500" & "2000" & "3000" & "4000" & "5000" & "10000" & > + "75000" in mt8188. > + An example of using RSEL define: > + pincontroller { > + i2c0-pins { > + pins { > + pinmux = ; > + bias-pull-up = ; > + } > + }; > + }; > + An example of using si unit resistance value(ohm): > + &pio { > + mediatek,rsel_resistance_in_si_unit; > + } > + pincontroller { > + i2c0-pins { > + pins { > + pinmux = ; > + bias-pull-up = <1000>; > + } > + }; > + }; The same. > + > + bias-disable: true > + > + output-high: true > + > + output-low: true > + > + input-enable: true > + > + input-disable: true > + > + input-schmitt-enable: true > + > + input-schmitt-disable: true > + > + required: > + - pinmux > + > +allOf: > + - $ref: "pinctrl.yaml#" No need for quotes, especially that you use different here " than in other places '. Best regards, Krzysztof