Re: [PATCH v5 18/24] media: i2c: maxim-serdes: add MAX96717 driver

[Julien Massot <julien.massot@collabora.com>]

On Wed, 2025-07-02 at 16:20 +0300, Cosmin Tanislav wrote:
> Add a new MAX96717 driver that also supports MAX9295A, MAX96717F and
> MAX96793.
> 
> Integrate it with the common serializer framework, while keeping
> compatibility with existing usecases, avoiding code duplication, and
> also enabling more features across all chips.
> 
> Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
> ---
>  drivers/media/i2c/maxim-serdes/Kconfig    |   16 +
>  drivers/media/i2c/maxim-serdes/Makefile   |    1 +
>  drivers/media/i2c/maxim-serdes/max96717.c | 1685 +++++++++++++++++++++
>  3 files changed, 1702 insertions(+)
>  create mode 100644 drivers/media/i2c/maxim-serdes/max96717.c
> 
> diff --git a/drivers/media/i2c/maxim-serdes/Kconfig b/drivers/media/i2c/maxim-serdes/Kconfig
> index cae1d5a1293e..648cb891eefe 100644
> --- a/drivers/media/i2c/maxim-serdes/Kconfig
> +++ b/drivers/media/i2c/maxim-serdes/Kconfig
> @@ -14,3 +14,19 @@ config VIDEO_MAXIM_SERDES
>  
>  	  To compile this driver as a module, choose M here: the module
>  	  will be called max_serdes.
> +
> +config VIDEO_MAX96717
> +	tristate "Maxim MAX96717 Serializer support"
> +	depends on COMMON_CLK
> +	select VIDEO_MAXIM_SERDES
> +	select GENERIC_PINCONF
> +	select GENERIC_PINCTRL_GROUPS
> +	select GENERIC_PINMUX_FUNCTIONS
> +	select GPIOLIB
> +	help
> +	  This driver supports the Maxim MAX9295A, MAX96717, MAX96717F,
> +	  MAX96793 Serializers, which receive video on a MIPI CSI-2
> +	  interface and output it on a GMSL2/3 link.
> +
> +	  To compile this driver as a module, choose M here: the module
> +	  will be called max96717.
> diff --git a/drivers/media/i2c/maxim-serdes/Makefile b/drivers/media/i2c/maxim-serdes/Makefile
> index b54326a5c81b..04abda6a5437 100644
> --- a/drivers/media/i2c/maxim-serdes/Makefile
> +++ b/drivers/media/i2c/maxim-serdes/Makefile
> @@ -1,3 +1,4 @@
>  # SPDX-License-Identifier: GPL-2.0
>  max-serdes-objs := max_serdes.o max_ser.o max_des.o
>  obj-$(CONFIG_VIDEO_MAXIM_SERDES) += max-serdes.o
> +obj-$(CONFIG_VIDEO_MAX96717) += max96717.o
> diff --git a/drivers/media/i2c/maxim-serdes/max96717.c b/drivers/media/i2c/maxim-serdes/max96717.c
> new file mode 100644
> index 000000000000..60b285e547b7
> --- /dev/null
> +++ b/drivers/media/i2c/maxim-serdes/max96717.c
> @@ -0,0 +1,1685 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Maxim MAX96717 GMSL2 Serializer Driver
> + *
> + * Copyright (C) 2025 Analog Devices Inc.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/gpio/driver.h>
> +#include <linux/pinctrl/pinctrl.h>
> +#include <linux/pinctrl/pinmux.h>
> +#include <linux/pinctrl/pinconf.h>
> +#include <linux/pinctrl/pinconf-generic.h>
> +#include <linux/regmap.h>
> +
> +#include "max_ser.h"
> +
> +#define MAX96717_REG0				0x0
> +
> +#define MAX96717_REG2				0x2
> +#define MAX96717_REG2_VID_TX_EN_P(p)		BIT(4 + (p))
> +
> +#define MAX96717_REG3				0x3
> +#define MAX96717_REG3_RCLKSEL			GENMASK(1, 0)
> +#define MAX96717_REG3_RCLK_ALT			BIT(2)
> +
> +#define MAX96717_REG6				0x6
> +#define MAX96717_REG6_RCLKEN			BIT(5)
> +
> +#define MAX96717_I2C_2(x)			(0x42 + (x) * 0x2)
> +#define MAX96717_I2C_2_SRC			GENMASK(7, 1)
> +
> +#define MAX96717_I2C_3(x)			(0x43 + (x) * 0x2)
> +#define MAX96717_I2C_3_DST			GENMASK(7, 1)
> +
> +#define MAX96717_TX3(p)				(0x53 + (p) * 0x4)
> +#define MAX96717_TX3_TX_STR_SEL			GENMASK(1, 0)
> +
> +#define MAX96717_VIDEO_TX0(p)			(0x100 + (p) * 0x8)
This is a bit confusing, looks like this register address is valid for MAX9295a VIDEO_TX0
but not for MAX96717, VIDEO_TX0 (Z) is at 0x110.



-- 
Julien