Re: [PATCH v4 07/13] clk: imx: Add initial support for i.MXRT clock driver

[Giulio Benetti <giulio.benetti@benettiengineering.com>]

Hi Abel,

On 13/12/21 12:30, Abel Vesa wrote:
> On 21-12-04 01:10:36, Jesse Taube wrote:
>> Add clock driver support for i.MXRT1***s starting with the i.MXRT1050.
>>
>> Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
>> Suggested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
>> ---
>> V1->V2:
>> * Kconfig: Add new line
>> * clk-imxrt.c: Remove unused const
>> * clk-imxrt.c: Remove set parents
>> * clk-imxrt.c: Use fsl,imxrt-anatop for anatop base address
>> V2->V3:
>> * Remove unused ANATOP_BASE_ADDR
>> * Move to hw API
>> * Add GPT's own clock
>> * Add SEMC clocks to set muxing to CRITICAL
>> V3->V4:
>> * Rename clk-imxrt.c to clk-imxrt1050.c
>> * Rename CONFIG_CLK_IMXRT to CONFIG_CLK_IMXRT1050
>> * Make CONFIG_CLK_IMXRT1050 selectable
>> ---
>>   drivers/clk/imx/Kconfig         |   5 +
>>   drivers/clk/imx/Makefile        |   1 +
>>   drivers/clk/imx/clk-imxrt1050.c | 156 ++++++++++++++++++++++++++++++++
>>   3 files changed, 162 insertions(+)
>>   create mode 100644 drivers/clk/imx/clk-imxrt1050.c
>>
>> diff --git a/drivers/clk/imx/Kconfig b/drivers/clk/imx/Kconfig
>> index c08edbd04d22..f697652ab19c 100644
>> --- a/drivers/clk/imx/Kconfig
>> +++ b/drivers/clk/imx/Kconfig
>> @@ -105,3 +105,8 @@ config CLK_IMX8ULP
>>   	select MXC_CLK
>>   	help
>>   	    Build the driver for i.MX8ULP CCM Clock Driver
>> +
>> +config CLK_IMXRT1050
>> +	bool "IMXRT1050 CCM Clock Driver"
>> +	depends on SOC_IMXRT
>> +	select MXC_CLK
>> diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile
>> index b5e040026dfb..3d9a1e3b5fc6 100644
>> --- a/drivers/clk/imx/Makefile
>> +++ b/drivers/clk/imx/Makefile
>> @@ -47,3 +47,4 @@ obj-$(CONFIG_CLK_IMX6UL) += clk-imx6ul.o
>>   obj-$(CONFIG_CLK_IMX7D)  += clk-imx7d.o
>>   obj-$(CONFIG_CLK_IMX7ULP) += clk-imx7ulp.o
>>   obj-$(CONFIG_CLK_VF610)  += clk-vf610.o
>> +obj-$(CONFIG_CLK_IMXRT1050)  += clk-imxrt1050.o
>> diff --git a/drivers/clk/imx/clk-imxrt1050.c b/drivers/clk/imx/clk-imxrt1050.c
>> new file mode 100644
>> index 000000000000..85ba1a240335
>> --- /dev/null
>> +++ b/drivers/clk/imx/clk-imxrt1050.c
>> @@ -0,0 +1,156 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
>> +/*
>> + * Copyright (C) 2021
>> + * Author(s):
>> + * Jesse Taube <Mr.Bossman075@gmail.com>
>> + * Giulio Benetti <giulio.benetti@benettiengineering.com>
>> + */
>> +#include <linux/mm.h>
>> +#include <linux/delay.h>
>> +#include <linux/clk.h>
>> +#include <linux/io.h>
>> +#include <linux/clkdev.h>
>> +#include <linux/clk-provider.h>
>> +#include <linux/err.h>
>> +#include <linux/of.h>
>> +#include <linux/of_address.h>
>> +#include <linux/of_irq.h>
>> +#include <linux/sizes.h>
>> +#include <soc/imx/revision.h>
>> +#include <dt-bindings/clock/imxrt1050-clock.h>
>> +
>> +#include "clk.h"
>> +
>> +static const char * const pll_ref_sels[] = {"osc", "dummy", };
>> +static const char * const per_sels[] = {"ipg_pdof", "osc", };
>> +static const char * const pll1_bypass_sels[] = {"pll1_arm", "pll1_arm_ref_sel", };
>> +static const char * const pll2_bypass_sels[] = {"pll2_sys", "pll2_sys_ref_sel", };
>> +static const char * const pll3_bypass_sels[] = {"pll3_usb_otg", "pll3_usb_otg_ref_sel", };
>> +static const char * const pll5_bypass_sels[] = {"pll5_video", "pll5_video_ref_sel", };
>> +static const char *const pre_periph_sels[] = {
>> +	"pll2_sys", "pll2_pfd2_396m", "pll2_pfd0_352m", "arm_podf", };
>> +static const char *const periph_sels[] = { "pre_periph_sel", "todo", };
>> +static const char *const usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", };
>> +static const char *const lpuart_sels[] = { "pll3_80m", "osc", };
>> +static const char *const lcdif_sels[] = {
>> +	"pll2_sys", "pll3_pfd3_454_74m", "pll5_video", "pll2_pfd0_352m",
>> +	"pll2_pfd1_594m", "pll3_pfd1_664_62m", };
>> +static const char *const semc_alt_sels[] = { "pll2_pfd2_396m", "pll3_pfd1_664_62m", };
>> +static const char *const semc_sels[] = { "periph_sel", "semc_alt_sel", };
>> +
>> +static struct clk_hw **hws;
>> +static struct clk_hw_onecell_data *clk_hw_data;
>> +
>> +static void __init imxrt_clocks_common_init(void __iomem *base)
>> +{
>> +	/* Anatop clocks */
>> +	hws[IMXRT1050_CLK_DUMMY] = imx_clk_hw_fixed("dummy", 0UL);
>> +
>> +	hws[IMXRT1050_CLK_PLL1_REF_SEL] = imx_clk_hw_mux("pll1_arm_ref_sel",
>> +		base + 0x0, 14, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
>> +	hws[IMXRT1050_CLK_PLL2_REF_SEL] = imx_clk_hw_mux("pll2_sys_ref_sel",
>> +		base + 0x30, 14, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
>> +	hws[IMXRT1050_CLK_PLL3_REF_SEL] = imx_clk_hw_mux("pll3_usb_otg_ref_sel",
>> +		base + 0x10, 14, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
>> +	hws[IMXRT1050_CLK_PLL5_REF_SEL] = imx_clk_hw_mux("pll5_video_ref_sel",
>> +		base + 0xa0, 14, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
>> +
>> +	hws[IMXRT1050_CLK_PLL1_ARM] = imx_clk_hw_pllv3(IMX_PLLV3_SYS, "pll1_arm",
>> +		"pll1_arm_ref_sel", base + 0x0, 0x7f);
>> +	hws[IMXRT1050_CLK_PLL2_SYS] = imx_clk_hw_pllv3(IMX_PLLV3_GENERIC, "pll2_sys",
>> +		"pll2_sys_ref_sel", base + 0x30, 0x1);
>> +	hws[IMXRT1050_CLK_PLL3_USB_OTG] = imx_clk_hw_pllv3(IMX_PLLV3_USB, "pll3_usb_otg",
>> +		"pll3_usb_otg_ref_sel", base + 0x10, 0x1);
>> +	hws[IMXRT1050_CLK_PLL5_VIDEO] = imx_clk_hw_pllv3(IMX_PLLV3_AV, "pll5_video",
>> +		"pll5_video_ref_sel", base + 0xa0, 0x7f);
>> +
>> +	/* PLL bypass out */
>> +	hws[IMXRT1050_CLK_PLL1_BYPASS] = imx_clk_hw_mux_flags("pll1_bypass", base + 0x0, 16, 1,
>> +		pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT);
>> +	hws[IMXRT1050_CLK_PLL2_BYPASS] = imx_clk_hw_mux_flags("pll2_bypass", base + 0x30, 16, 1,
>> +		pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT);
>> +	hws[IMXRT1050_CLK_PLL3_BYPASS] = imx_clk_hw_mux_flags("pll3_bypass", base + 0x10, 16, 1,
>> +		pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT);
>> +	hws[IMXRT1050_CLK_PLL5_BYPASS] = imx_clk_hw_mux_flags("pll5_bypass", base + 0xa0, 16, 1,
>> +		pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT);
>> +
>> +	hws[IMXRT1050_CLK_VIDEO_POST_DIV_SEL] = imx_clk_hw_divider("video_post_div_sel",
>> +		"pll5_video", base + 0xa0, 19, 2);
>> +	hws[IMXRT1050_CLK_VIDEO_DIV] = imx_clk_hw_divider("video_div",
>> +		"video_post_div_sel", base + 0x170, 30, 2);
>> +
>> +	hws[IMXRT1050_CLK_PLL3_80M] = imx_clk_hw_fixed_factor("pll3_80m",  "pll3_usb_otg", 1, 6);
>> +
>> +	hws[IMXRT1050_CLK_PLL2_PFD0_352M] = imx_clk_hw_pfd("pll2_pfd0_352m", "pll2_sys", base + 0x100, 0);
>> +	hws[IMXRT1050_CLK_PLL2_PFD1_594M] = imx_clk_hw_pfd("pll2_pfd1_594m", "pll2_sys", base + 0x100, 1);
>> +	hws[IMXRT1050_CLK_PLL2_PFD2_396M] = imx_clk_hw_pfd("pll2_pfd2_396m", "pll2_sys", base + 0x100, 2);
>> +	hws[IMXRT1050_CLK_PLL3_PFD1_664_62M] = imx_clk_hw_pfd("pll3_pfd1_664_62m", "pll3_usb_otg", base + 0xf0, 1);
>> +	hws[IMXRT1050_CLK_PLL3_PFD3_454_74M] = imx_clk_hw_pfd("pll3_pfd3_454_74m", "pll3_usb_otg", base + 0xf0, 3);
>> +}
>> +
>> +static void __init imxrt1050_clocks_init(struct device_node *np)
>> +{
>> +	void __iomem *ccm_base;
>> +	void __iomem *pll_base;
>> +	struct device_node *anp;
>> +
>> +	clk_hw_data = kzalloc(struct_size(clk_hw_data, hws,
>> +					  IMXRT1050_CLK_END), GFP_KERNEL);
>> +	if (WARN_ON(!clk_hw_data))
>> +		return;
>> +
>> +	clk_hw_data->num = IMXRT1050_CLK_END;
>> +	hws = clk_hw_data->hws;
>> +
>> +	hws[IMXRT1050_CLK_OSC] = __clk_get_hw(of_clk_get_by_name(np, "osc"));
>> +
>> +	anp = of_find_compatible_node(NULL, NULL, "fsl,imxrt-anatop");
>> +	pll_base = of_iomap(anp, 0);
>> +	WARN_ON(!pll_base);
>> +	imxrt_clocks_common_init(pll_base);
>> +	/* CCM clocks */
>> +	ccm_base = of_iomap(np, 0);
>> +	WARN_ON(!ccm_base);
>> +
>> +	hws[IMXRT1050_CLK_ARM_PODF] = imx_clk_hw_divider("arm_podf", "pll1_arm", ccm_base + 0x10, 0, 3);
>> +	hws[IMXRT1050_CLK_PRE_PERIPH_SEL] = imx_clk_hw_mux("pre_periph_sel", ccm_base + 0x18, 18, 2,
>> +		pre_periph_sels, ARRAY_SIZE(pre_periph_sels));
>> +	hws[IMXRT1050_CLK_PERIPH_SEL] = imx_clk_hw_mux("periph_sel", ccm_base + 0x14, 25, 1,
>> +		periph_sels, ARRAY_SIZE(periph_sels));
>> +	hws[IMXRT1050_CLK_USDHC1_SEL] = imx_clk_hw_mux("usdhc1_sel", ccm_base + 0x1c, 16, 1,
>> +		usdhc_sels, ARRAY_SIZE(usdhc_sels));
>> +	hws[IMXRT1050_CLK_USDHC2_SEL] = imx_clk_hw_mux("usdhc2_sel", ccm_base + 0x1c, 17, 1,
>> +		usdhc_sels, ARRAY_SIZE(usdhc_sels));
>> +	hws[IMXRT1050_CLK_LPUART_SEL] = imx_clk_hw_mux("lpuart_sel", ccm_base + 0x24, 6, 1,
>> +		lpuart_sels, ARRAY_SIZE(lpuart_sels));
>> +	hws[IMXRT1050_CLK_LCDIF_SEL] = imx_clk_hw_mux("lcdif_sel", ccm_base + 0x38, 15, 3,
>> +		lcdif_sels, ARRAY_SIZE(lcdif_sels));
>> +	hws[IMXRT1050_CLK_PER_CLK_SEL] = imx_clk_hw_mux("per_sel", ccm_base + 0x1C, 6, 1,
>> +		per_sels, ARRAY_SIZE(per_sels));
>> +	hws[IMXRT1050_CLK_SEMC_ALT_SEL] = imx_clk_hw_mux("semc_alt_sel", ccm_base + 0x14, 7, 1,
>> +		semc_alt_sels, ARRAY_SIZE(semc_alt_sels));
>> +	hws[IMXRT1050_CLK_SEMC_SEL] = imx_clk_hw_mux_flags("semc_sel", ccm_base + 0x14, 6, 1,
>> +		semc_sels, ARRAY_SIZE(semc_sels), CLK_IS_CRITICAL);
>> +
>> +	hws[IMXRT1050_CLK_AHB_PODF] = imx_clk_hw_divider("ahb", "periph_sel", ccm_base + 0x14, 10, 3);
>> +	hws[IMXRT1050_CLK_IPG_PDOF] = imx_clk_hw_divider("ipg", "ahb", ccm_base + 0x14, 8, 2);
>> +	hws[IMXRT1050_CLK_PER_PDOF] = imx_clk_hw_divider("per", "per_sel", ccm_base + 0x1C, 0, 5);
>> +
>> +	hws[IMXRT1050_CLK_USDHC1_PODF] = imx_clk_hw_divider("usdhc1_podf", "usdhc1_sel", ccm_base + 0x24, 11, 3);
>> +	hws[IMXRT1050_CLK_USDHC2_PODF] = imx_clk_hw_divider("usdhc2_podf", "usdhc2_sel", ccm_base + 0x24, 16, 3);
>> +	hws[IMXRT1050_CLK_LPUART_PODF] = imx_clk_hw_divider("lpuart_podf", "lpuart_sel", ccm_base + 0x24, 0, 6);
>> +	hws[IMXRT1050_CLK_LCDIF_PRED] = imx_clk_hw_divider("lcdif_pred", "lcdif_sel", ccm_base + 0x38, 12, 3);
>> +	hws[IMXRT1050_CLK_LCDIF_PODF] = imx_clk_hw_divider("lcdif_podf", "lcdif_pred", ccm_base + 0x18, 23, 3);
>> +
>> +	hws[IMXRT1050_CLK_USDHC1] = imx_clk_hw_gate2("usdhc1", "usdhc1_podf", ccm_base + 0x80, 2);
>> +	hws[IMXRT1050_CLK_USDHC2] = imx_clk_hw_gate2("usdhc2", "usdhc2_podf", ccm_base + 0x80, 4);
>> +	hws[IMXRT1050_CLK_LPUART1] = imx_clk_hw_gate2("lpuart1", "lpuart_podf", ccm_base + 0x7c, 24);
>> +	hws[IMXRT1050_CLK_LCDIF_APB] = imx_clk_hw_gate2("lcdif", "lcdif_podf", ccm_base + 0x74, 10);
>> +	hws[IMXRT1050_CLK_DMA] = imx_clk_hw_gate("dma", "ipg", ccm_base + 0x7C, 6);
>> +	hws[IMXRT1050_CLK_DMA_MUX] = imx_clk_hw_gate("dmamux0", "ipg", ccm_base + 0x7C, 7);
>> +	hws[IMXRT1050_CLK_GPT] = imx_clk_hw_fixed_factor("gpt", "osc", 1, 8);
>> +	imx_check_clk_hws(hws, IMXRT1050_CLK_END);
>> +
>> +	of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_hw_data);
>> +}
>> +CLK_OF_DECLARE(imxrt_ccm, "fsl,imxrt1050-ccm", imxrt1050_clocks_init);
> 
> I would suggest module platform driver instead.

Can you please point us an example?

> Sorry for the late review.

No problem

Thank you
Best regards
-- 
Giulio Benetti
Benetti Engineering sas