Re: [PATCH 2/9] dt-bindings: fsl,fpga-qixis-i2c: extend support to also cover the LX2160ARDB FPGA

[Krzysztof Kozlowski <krzk@kernel.org>]

On 09/07/2025 13:26, Ioana Ciornei wrote:
> Extend the list of supported compatible strings with fsl,lx2160ardb-fpga.
> 
> Since the register map exposed by the LX2160ARDB's FPGA also contains
> two GPIO controllers, accept the necessary GPIO pattern property. At the
> same time, add the #address-cells and #size-cells properties as valid
> ones.
> 
> This is needed because when defining child devices such as the GPIO
> controller described in the added example, the child device needs a the
> reg property to properly identify its register location.
> 
> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
> ---
>  .../bindings/board/fsl,fpga-qixis-i2c.yaml    | 35 +++++++++++++++++++

So here is the board? Why FPGA is in the board...

>  1 file changed, 35 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/board/fsl,fpga-qixis-i2c.yaml b/Documentation/devicetree/bindings/board/fsl,fpga-qixis-i2c.yaml
> index 28b37772fb65..e8981f974210 100644
> --- a/Documentation/devicetree/bindings/board/fsl,fpga-qixis-i2c.yaml
> +++ b/Documentation/devicetree/bindings/board/fsl,fpga-qixis-i2c.yaml
> @@ -22,6 +22,13 @@ properties:
>                - fsl,lx2160aqds-fpga
>            - const: fsl,fpga-qixis-i2c
>            - const: simple-mfd
> +      - const: fsl,lx2160ardb-fpga

Weird, your first patch added three compatibles, this adds only one.

> +
> +  "#address-cells":
> +    const: 1
> +
> +  "#size-cells":
> +    const: 0
>  
>    interrupts:
>      maxItems: 1
> @@ -32,6 +39,10 @@ properties:
>    mux-controller:
>      $ref: /schemas/mux/reg-mux.yaml
>  
> +patternProperties:
> +  "^gpio(@[0-9a-f]+)?$":

Why unit address is optional? Anyway, this is wrong. You do not have
ranges here and earlier you already said children do not have any
addressing. Look at mux.

> +    $ref: /schemas/gpio/fsl,fpga-gpio.yaml
> +
>  required:
>    - compatible
>    - reg
> @@ -68,3 +79,27 @@ examples:
>          };
>      };
>  
> +  - |
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        board-control@66 {
> +            compatible = "fsl,lx2160ardb-fpga";
> +            reg = <0x66>;
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            gpio@19 {

And what is the meaning of @19?


Best regards,
Krzysztof