Re: [PATCH v3 17/18] regulator: qcom-rpmh: add support for pmm8654au regulators

[Konrad Dybcio <konrad.dybcio@linaro.org>]

On 27.03.2023 14:53, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> 
> Add the RPMH regulators exposed by the PMM8654au PMIC and its variants.
> 
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> Cc: Mark Brown <broonie@kernel.org>
> ---
I can't check the validity of the regulator types and ranges, but
for the overall picture:

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  drivers/regulator/qcom-rpmh-regulator.c | 55 +++++++++++++++++++++++++
>  1 file changed, 55 insertions(+)
> 
> diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
> index 4826d60e5d95..b0a58c62b1e2 100644
> --- a/drivers/regulator/qcom-rpmh-regulator.c
> +++ b/drivers/regulator/qcom-rpmh-regulator.c
> @@ -694,6 +694,16 @@ static const struct rpmh_vreg_hw_data pmic5_pldo_lv = {
>  	.of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
>  };
>  
> +static const struct rpmh_vreg_hw_data pmic5_pldo515_mv = {
> +	.regulator_type = VRM,
> +	.ops = &rpmh_regulator_vrm_drms_ops,
> +	.voltage_range = REGULATOR_LINEAR_RANGE(1800000, 0, 187, 8000),
> +	.n_voltages = 188,
> +	.hpm_min_load_uA = 10000,
> +	.pmic_mode_map = pmic_mode_map_pmic5_ldo,
> +	.of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
> +};
> +
>  static const struct rpmh_vreg_hw_data pmic5_nldo = {
>  	.regulator_type = VRM,
>  	.ops = &rpmh_regulator_vrm_drms_ops,
> @@ -704,6 +714,16 @@ static const struct rpmh_vreg_hw_data pmic5_nldo = {
>  	.of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
>  };
>  
> +static const struct rpmh_vreg_hw_data pmic5_nldo515 = {
> +	.regulator_type = VRM,
> +	.ops = &rpmh_regulator_vrm_drms_ops,
> +	.voltage_range = REGULATOR_LINEAR_RANGE(320000, 0, 210, 8000),
> +	.n_voltages = 211,
> +	.hpm_min_load_uA = 30000,
> +	.pmic_mode_map = pmic_mode_map_pmic5_ldo,
> +	.of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
> +};
> +
>  static const struct rpmh_vreg_hw_data pmic5_hfsmps510 = {
>  	.regulator_type = VRM,
>  	.ops = &rpmh_regulator_vrm_ops,
> @@ -749,6 +769,15 @@ static const struct rpmh_vreg_hw_data pmic5_ftsmps525_mv = {
>  	.of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode,
>  };
>  
> +static const struct rpmh_vreg_hw_data pmic5_ftsmps527 = {
> +	.regulator_type = VRM,
> +	.ops = &rpmh_regulator_vrm_ops,
> +	.voltage_range = REGULATOR_LINEAR_RANGE(320000, 0, 215, 8000),
> +	.n_voltages = 215,
> +	.pmic_mode_map = pmic_mode_map_pmic5_smps,
> +	.of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode,
> +};
> +
>  static const struct rpmh_vreg_hw_data pmic5_hfsmps515 = {
>  	.regulator_type = VRM,
>  	.ops = &rpmh_regulator_vrm_ops,
> @@ -937,6 +966,28 @@ static const struct rpmh_vreg_init_data pmm8155au_vreg_data[] = {
>  	{}
>  };
>  
> +static const struct rpmh_vreg_init_data pmm8654au_vreg_data[] = {
> +	RPMH_VREG("smps1",  "smp%s1",  &pmic5_ftsmps527,  "vdd-s1"),
> +	RPMH_VREG("smps2",  "smp%s2",  &pmic5_ftsmps527,  "vdd-s2"),
> +	RPMH_VREG("smps3",  "smp%s3",  &pmic5_ftsmps527,  "vdd-s3"),
> +	RPMH_VREG("smps4",  "smp%s4",  &pmic5_ftsmps527,  "vdd-s4"),
> +	RPMH_VREG("smps5",  "smp%s5",  &pmic5_ftsmps527,  "vdd-s5"),
> +	RPMH_VREG("smps6",  "smp%s6",  &pmic5_ftsmps527,  "vdd-s6"),
> +	RPMH_VREG("smps7",  "smp%s7",  &pmic5_ftsmps527,  "vdd-s7"),
> +	RPMH_VREG("smps8",  "smp%s8",  &pmic5_ftsmps527,  "vdd-s8"),
> +	RPMH_VREG("smps9",  "smp%s9",  &pmic5_ftsmps527,  "vdd-s9"),
> +	RPMH_VREG("ldo1",   "ldo%s1",  &pmic5_nldo515,    "vdd-s9"),
> +	RPMH_VREG("ldo2",   "ldo%s2",  &pmic5_nldo515,    "vdd-l2-l3"),
> +	RPMH_VREG("ldo3",   "ldo%s3",  &pmic5_nldo515,    "vdd-l2-l3"),
> +	RPMH_VREG("ldo4",   "ldo%s4",  &pmic5_nldo515,    "vdd-s9"),
> +	RPMH_VREG("ldo5",   "ldo%s5",  &pmic5_nldo515,    "vdd-s9"),
> +	RPMH_VREG("ldo6",   "ldo%s6",  &pmic5_nldo515,    "vdd-l6-l7"),
> +	RPMH_VREG("ldo7",   "ldo%s7",  &pmic5_nldo515,    "vdd-l6-l7"),
> +	RPMH_VREG("ldo8",   "ldo%s8",  &pmic5_pldo515_mv, "vdd-l8-l9"),
> +	RPMH_VREG("ldo9",   "ldo%s9",  &pmic5_pldo,       "vdd-l8-l9"),
> +	{}
> +};
> +
>  static const struct rpmh_vreg_init_data pm8350_vreg_data[] = {
>  	RPMH_VREG("smps1",  "smp%s1",  &pmic5_ftsmps510, "vdd-s1"),
>  	RPMH_VREG("smps2",  "smp%s2",  &pmic5_ftsmps510, "vdd-s2"),
> @@ -1431,6 +1482,10 @@ static const struct of_device_id __maybe_unused rpmh_regulator_match_table[] = {
>  		.compatible = "qcom,pmm8155au-rpmh-regulators",
>  		.data = pmm8155au_vreg_data,
>  	},
> +	{
> +		.compatible = "qcom,pmm8654au-rpmh-regulators",
> +		.data = pmm8654au_vreg_data,
> +	},
>  	{
>  		.compatible = "qcom,pmx55-rpmh-regulators",
>  		.data = pmx55_vreg_data,