[PATCH v4 0/9] WCOVE chained IRQ fix

[PATCH v4 0/9] WCOVE chained IRQ fix

[sathyanarayanan.kuppuswamy]

From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>

Following patch set fixes the chained IRQ issue observed in WCOVE PMIC driver.

Changes since v3:
 * Added fix for typec wcove driver.

Kuppuswamy Sathyanarayanan (9):
  mfd: intel_soc_pmic_bxtwc: fix TMU interrupt index
  mfd: intel_soc_pmic_bxtwc: remove thermal second level irqs
  thermal: intel_bxt_pmic_thermal: use first level PMIC thermal irq
  mfd: intel_soc_pmic_bxtwc: remove second level irq for gpio device
  gpio: gpio-wcove: use first level PMIC GPIO irq
  mfd: intel_soc_pmic_bxtwc: utilize devm_* functions in driver probe
  mfd: intel_soc_pmic_bxtwc: use chained irqs for second level irq chips
  platform: x86: intel_bxtwc_tmu: remove first level irq unmask
  usb: typec: typec_wcove: Use charger irq chip to get usbc virq

 drivers/gpio/gpio-wcove.c                |  14 +-
 drivers/mfd/intel_soc_pmic_bxtwc.c       | 234 ++++++++++++++++++++-----------
 drivers/platform/x86/intel_bxtwc_tmu.c   |   4 -
 drivers/thermal/intel_bxt_pmic_thermal.c |   2 +-
 drivers/usb/typec/typec_wcove.c          |   2 +-
 include/linux/mfd/intel_soc_pmic.h       |   5 +-
 6 files changed, 175 insertions(+), 86 deletions(-)

-- 
2.7.4

[PATCH v4 1/9] mfd: intel_soc_pmic_bxtwc: fix TMU interrupt index

[sathyanarayanan.kuppuswamy]

From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>

TMU interrupts are registered as a separate interrupt chip, and
hence it should start its interrupt index(BXTWC_TMU_IRQ) number
from 0. But currently, BXTWC_TMU_IRQ is defined as part of enum
bxtwc_irqs_level2 and its index value is 11. Since this index
value is used when calculating .num_irqs of regmap_irq_chip_tmu,
it incorrectly reports number of irqs as 12 instead of actual
value of 1.

This patch fixes this issue by creating new enum of tmu irqs and
resetting its starting index to 0.

Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/mfd/intel_soc_pmic_bxtwc.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

Changes since v1: 
 * Removed code from commit message.

Changes since v2: 
 * Rebased on top of latest release.

Changes sinve v3:
 * Rebased on top of latest release.

diff --git a/drivers/mfd/intel_soc_pmic_bxtwc.c b/drivers/mfd/intel_soc_pmic_bxtwc.c
index 8c3cbf6..7cbaf1e 100644
--- a/drivers/mfd/intel_soc_pmic_bxtwc.c
+++ b/drivers/mfd/intel_soc_pmic_bxtwc.c
@@ -95,7 +95,10 @@ enum bxtwc_irqs_level2 {
 	BXTWC_GPIO0_IRQ,
 	BXTWC_GPIO1_IRQ,
 	BXTWC_CRIT_IRQ,
-	BXTWC_TMU_IRQ,
+};
+
+enum bxtwc_irqs_tmu {
+	BXTWC_TMU_IRQ = 0,
 };
 
 static const struct regmap_irq bxtwc_regmap_irqs[] = {
-- 
2.7.4

[PATCH v4 2/9] mfd: intel_soc_pmic_bxtwc: remove thermal second level irqs

[sathyanarayanan.kuppuswamy-VuQAYsv1563Yd54FQh9/CA]

From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>

Since all second level thermal irqs are consumed by the same
device(bxt_wcove_thermal), there is no need to expose them as separate
interrupts. We can just export only the first level irqs for thermal and
let the device(bxt_wcove_thermal) driver handle the second level irqs
based on thermal interrupt status register. Also, just using only the
first level irq will eliminate the bug involved in requesting only the
second level irq and not explicitly enable the first level irq. For
more info on this issue please read the details at,

https://lkml.org/lkml/2017/2/27/148

Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
Acked-for-MFD-by: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
 drivers/mfd/intel_soc_pmic_bxtwc.c | 32 ++++++++++++--------------------
 1 file changed, 12 insertions(+), 20 deletions(-)

Changes since v1:
 * None

Changes since v2: 
 * Rebased on top of latest release.

Changes since v3:
 * Rebased on top of latest release.

diff --git a/drivers/mfd/intel_soc_pmic_bxtwc.c b/drivers/mfd/intel_soc_pmic_bxtwc.c
index 7cbaf1e..7c1ed27 100644
--- a/drivers/mfd/intel_soc_pmic_bxtwc.c
+++ b/drivers/mfd/intel_soc_pmic_bxtwc.c
@@ -84,10 +84,7 @@ enum bxtwc_irqs {
 
 enum bxtwc_irqs_level2 {
 	/* Level 2 */
-	BXTWC_THRM0_IRQ = 0,
-	BXTWC_THRM1_IRQ,
-	BXTWC_THRM2_IRQ,
-	BXTWC_BCU_IRQ,
+	BXTWC_BCU_IRQ = 0,
 	BXTWC_ADC_IRQ,
 	BXTWC_USBC_IRQ,
 	BXTWC_CHGR0_IRQ,
@@ -114,17 +111,14 @@ static const struct regmap_irq bxtwc_regmap_irqs[] = {
 };
 
 static const struct regmap_irq bxtwc_regmap_irqs_level2[] = {
-	REGMAP_IRQ_REG(BXTWC_THRM0_IRQ, 0, 0xff),
-	REGMAP_IRQ_REG(BXTWC_THRM1_IRQ, 1, 0xbf),
-	REGMAP_IRQ_REG(BXTWC_THRM2_IRQ, 2, 0xff),
-	REGMAP_IRQ_REG(BXTWC_BCU_IRQ, 3, 0x1f),
-	REGMAP_IRQ_REG(BXTWC_ADC_IRQ, 4, 0xff),
-	REGMAP_IRQ_REG(BXTWC_USBC_IRQ, 5, BIT(5)),
-	REGMAP_IRQ_REG(BXTWC_CHGR0_IRQ, 5, 0x1f),
-	REGMAP_IRQ_REG(BXTWC_CHGR1_IRQ, 6, 0x1f),
-	REGMAP_IRQ_REG(BXTWC_GPIO0_IRQ, 7, 0xff),
-	REGMAP_IRQ_REG(BXTWC_GPIO1_IRQ, 8, 0x3f),
-	REGMAP_IRQ_REG(BXTWC_CRIT_IRQ, 9, 0x03),
+	REGMAP_IRQ_REG(BXTWC_BCU_IRQ, 0, 0x1f),
+	REGMAP_IRQ_REG(BXTWC_ADC_IRQ, 1, 0xff),
+	REGMAP_IRQ_REG(BXTWC_USBC_IRQ, 2, BIT(5)),
+	REGMAP_IRQ_REG(BXTWC_CHGR0_IRQ, 2, 0x1f),
+	REGMAP_IRQ_REG(BXTWC_CHGR1_IRQ, 3, 0x1f),
+	REGMAP_IRQ_REG(BXTWC_GPIO0_IRQ, 4, 0xff),
+	REGMAP_IRQ_REG(BXTWC_GPIO1_IRQ, 5, 0x3f),
+	REGMAP_IRQ_REG(BXTWC_CRIT_IRQ, 6, 0x03),
 };
 
 static const struct regmap_irq bxtwc_regmap_irqs_tmu[] = {
@@ -142,8 +136,8 @@ static struct regmap_irq_chip bxtwc_regmap_irq_chip = {
 
 static struct regmap_irq_chip bxtwc_regmap_irq_chip_level2 = {
 	.name = "bxtwc_irq_chip_level2",
-	.status_base = BXTWC_THRM0IRQ,
-	.mask_base = BXTWC_MTHRM0IRQ,
+	.status_base = BXTWC_BCUIRQ,
+	.mask_base = BXTWC_MBCUIRQ,
 	.irqs = bxtwc_regmap_irqs_level2,
 	.num_irqs = ARRAY_SIZE(bxtwc_regmap_irqs_level2),
 	.num_regs = 10,
@@ -177,9 +171,7 @@ static struct resource charger_resources[] = {
 };
 
 static struct resource thermal_resources[] = {
-	DEFINE_RES_IRQ(BXTWC_THRM0_IRQ),
-	DEFINE_RES_IRQ(BXTWC_THRM1_IRQ),
-	DEFINE_RES_IRQ(BXTWC_THRM2_IRQ),
+	DEFINE_RES_IRQ(BXTWC_THRM_LVL1_IRQ),
 };
 
 static struct resource bcu_resources[] = {
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v4 4/9] mfd: intel_soc_pmic_bxtwc: remove second level irq for gpio device

[sathyanarayanan.kuppuswamy-VuQAYsv1563Yd54FQh9/CA]

From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>

Currently all PMIC GPIO domain irqs are consumed by the same
device(bxt_wcove_gpio), so there is no need to export them as
separate interrupts. We can just export only the first level
GPIO irq(BXTWC_GPIO_LVL1_IRQ) as an irq resource and let the
GPIO device driver(bxt_wcove_gpio) handle the GPIO sub domain
irqs based on status value of GPIO level2 interrupt status
register. Also, just using only the first level irq will eliminate
the bug involved in requesting only the second level irq and not
explicitly enable the first level irq. For more info on this
issue please read the details at,

https://lkml.org/lkml/2017/2/27/148

Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
Acked-for-MFD-by: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
 drivers/mfd/intel_soc_pmic_bxtwc.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

Changes since v1:
 * None

Changes since v2: 
 * Rebased on top of latest release.

Changes since v3:
 * None

diff --git a/drivers/mfd/intel_soc_pmic_bxtwc.c b/drivers/mfd/intel_soc_pmic_bxtwc.c
index 7c1ed27..af11c43 100644
--- a/drivers/mfd/intel_soc_pmic_bxtwc.c
+++ b/drivers/mfd/intel_soc_pmic_bxtwc.c
@@ -89,8 +89,6 @@ enum bxtwc_irqs_level2 {
 	BXTWC_USBC_IRQ,
 	BXTWC_CHGR0_IRQ,
 	BXTWC_CHGR1_IRQ,
-	BXTWC_GPIO0_IRQ,
-	BXTWC_GPIO1_IRQ,
 	BXTWC_CRIT_IRQ,
 };
 
@@ -116,8 +114,6 @@ static const struct regmap_irq bxtwc_regmap_irqs_level2[] = {
 	REGMAP_IRQ_REG(BXTWC_USBC_IRQ, 2, BIT(5)),
 	REGMAP_IRQ_REG(BXTWC_CHGR0_IRQ, 2, 0x1f),
 	REGMAP_IRQ_REG(BXTWC_CHGR1_IRQ, 3, 0x1f),
-	REGMAP_IRQ_REG(BXTWC_GPIO0_IRQ, 4, 0xff),
-	REGMAP_IRQ_REG(BXTWC_GPIO1_IRQ, 5, 0x3f),
 	REGMAP_IRQ_REG(BXTWC_CRIT_IRQ, 6, 0x03),
 };
 
@@ -153,8 +149,7 @@ static struct regmap_irq_chip bxtwc_regmap_irq_chip_tmu = {
 };
 
 static struct resource gpio_resources[] = {
-	DEFINE_RES_IRQ_NAMED(BXTWC_GPIO0_IRQ, "GPIO0"),
-	DEFINE_RES_IRQ_NAMED(BXTWC_GPIO1_IRQ, "GPIO1"),
+	DEFINE_RES_IRQ_NAMED(BXTWC_GPIO_LVL1_IRQ, "GPIO"),
 };
 
 static struct resource adc_resources[] = {
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v4 3/9] thermal: intel_bxt_pmic_thermal: use first level PMIC thermal irq

[sathyanarayanan.kuppuswamy]

From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>

PMIC mfd driver only exports first level irq for thermal device.
But currently we are reading the irqs from the second level irq
chip, So this patch fixes this issue by adding support to use
first level PMIC thermal irq.

Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
---
 drivers/thermal/intel_bxt_pmic_thermal.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Changes since v1:
 * None

Changes since v2: 
 * Rebased on top of latest release.

Changes since v3: 
 * Rebased on top of latest release.

diff --git a/drivers/thermal/intel_bxt_pmic_thermal.c b/drivers/thermal/intel_bxt_pmic_thermal.c
index 0f19a39..ef6b322 100644
--- a/drivers/thermal/intel_bxt_pmic_thermal.c
+++ b/drivers/thermal/intel_bxt_pmic_thermal.c
@@ -241,7 +241,7 @@ static int pmic_thermal_probe(struct platform_device *pdev)
 	}
 
 	regmap = pmic->regmap;
-	regmap_irq_chip = pmic->irq_chip_data_level2;
+	regmap_irq_chip = pmic->irq_chip_data;
 
 	pmic_irq_count = 0;
 	while ((irq = platform_get_irq(pdev, pmic_irq_count)) != -ENXIO) {
-- 
2.7.4

[PATCH v4 5/9] gpio: gpio-wcove: use first level PMIC GPIO irq

[sathyanarayanan.kuppuswamy]

From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>

PMIC mfd driver only exports first level irq for GPIO device.
But currently we are reading the irqs from the second level irq
chip, So this patch fixes this issue by adding support to use
first level PMIC GPIO irq.

Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/gpio/gpio-wcove.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

Changes since v1:
 * used correct mask for GPIO0 and GPIO1 interrupts

Changes since v2: 
 * Rebased on top of latest release.
 * Removed IRQ0 and IRQ1 mask defines.

Changes since v3:
 * None

diff --git a/drivers/gpio/gpio-wcove.c b/drivers/gpio/gpio-wcove.c
index 7b1bc20..bba7704 100644
--- a/drivers/gpio/gpio-wcove.c
+++ b/drivers/gpio/gpio-wcove.c
@@ -401,7 +401,7 @@ static int wcove_gpio_probe(struct platform_device *pdev)
 	if (!wg)
 		return -ENOMEM;
 
-	wg->regmap_irq_chip = pmic->irq_chip_data_level2;
+	wg->regmap_irq_chip = pmic->irq_chip_data;
 
 	platform_set_drvdata(pdev, wg);
 
@@ -449,6 +449,18 @@ static int wcove_gpio_probe(struct platform_device *pdev)
 
 	gpiochip_set_nested_irqchip(&wg->chip, &wcove_irqchip, virq);
 
+	/* Enable GPIO0 interrupts */
+	ret = regmap_update_bits(wg->regmap, IRQ_MASK_BASE, GPIO_IRQ0_MASK,
+				 0x00);
+	if (ret)
+		return ret;
+
+	/* Enable GPIO1 interrupts */
+	ret = regmap_update_bits(wg->regmap, IRQ_MASK_BASE + 1, GPIO_IRQ1_MASK,
+				 0x00);
+	if (ret)
+		return ret;
+
 	return 0;
 }
 
-- 
2.7.4

[PATCH v4 6/9] mfd: intel_soc_pmic_bxtwc: utilize devm_* functions in driver probe

[sathyanarayanan.kuppuswamy]

From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>

Cleanup the resource allocation/free code in probe function by using
devm_* calls.

Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/mfd/intel_soc_pmic_bxtwc.c | 54 +++++++++++++-------------------------
 1 file changed, 18 insertions(+), 36 deletions(-)

Changes since v1:
 * None

Changes since v2:
 * Rebased on top of latest release.

Changes since v3:
 * None

diff --git a/drivers/mfd/intel_soc_pmic_bxtwc.c b/drivers/mfd/intel_soc_pmic_bxtwc.c
index af11c43..feeda6e 100644
--- a/drivers/mfd/intel_soc_pmic_bxtwc.c
+++ b/drivers/mfd/intel_soc_pmic_bxtwc.c
@@ -399,45 +399,44 @@ static int bxtwc_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	ret = regmap_add_irq_chip(pmic->regmap, pmic->irq,
-				  IRQF_ONESHOT | IRQF_SHARED,
-				  0, &bxtwc_regmap_irq_chip,
-				  &pmic->irq_chip_data);
+	ret = devm_regmap_add_irq_chip(&pdev->dev, pmic->regmap, pmic->irq,
+				       IRQF_ONESHOT | IRQF_SHARED,
+				       0, &bxtwc_regmap_irq_chip,
+				       &pmic->irq_chip_data);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to add IRQ chip\n");
 		return ret;
 	}
 
-	ret = regmap_add_irq_chip(pmic->regmap, pmic->irq,
-				  IRQF_ONESHOT | IRQF_SHARED,
-				  0, &bxtwc_regmap_irq_chip_level2,
-				  &pmic->irq_chip_data_level2);
+	ret = devm_regmap_add_irq_chip(&pdev->dev, pmic->regmap, pmic->irq,
+				       IRQF_ONESHOT | IRQF_SHARED,
+				       0, &bxtwc_regmap_irq_chip_level2,
+				       &pmic->irq_chip_data_level2);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to add secondary IRQ chip\n");
-		goto err_irq_chip_level2;
+		return ret;
 	}
 
-	ret = regmap_add_irq_chip(pmic->regmap, pmic->irq,
-				  IRQF_ONESHOT | IRQF_SHARED,
-				  0, &bxtwc_regmap_irq_chip_tmu,
-				  &pmic->irq_chip_data_tmu);
+	ret = devm_regmap_add_irq_chip(&pdev->dev, pmic->regmap, pmic->irq,
+				       IRQF_ONESHOT | IRQF_SHARED,
+				       0, &bxtwc_regmap_irq_chip_tmu,
+				       &pmic->irq_chip_data_tmu);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to add TMU IRQ chip\n");
-		goto err_irq_chip_tmu;
+		return ret;
 	}
 
-	ret = mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE, bxt_wc_dev,
-			      ARRAY_SIZE(bxt_wc_dev), NULL, 0,
-			      NULL);
+	ret = devm_mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE, bxt_wc_dev,
+				   ARRAY_SIZE(bxt_wc_dev), NULL, 0, NULL);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to add devices\n");
-		goto err_mfd;
+		return ret;
 	}
 
 	ret = sysfs_create_group(&pdev->dev.kobj, &bxtwc_group);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to create sysfs group %d\n", ret);
-		goto err_sysfs;
+		return ret;
 	}
 
 	/*
@@ -451,28 +450,11 @@ static int bxtwc_probe(struct platform_device *pdev)
 				BXTWC_MIRQLVL1_MCHGR, 0);
 
 	return 0;
-
-err_sysfs:
-	mfd_remove_devices(&pdev->dev);
-err_mfd:
-	regmap_del_irq_chip(pmic->irq, pmic->irq_chip_data_tmu);
-err_irq_chip_tmu:
-	regmap_del_irq_chip(pmic->irq, pmic->irq_chip_data_level2);
-err_irq_chip_level2:
-	regmap_del_irq_chip(pmic->irq, pmic->irq_chip_data);
-
-	return ret;
 }
 
 static int bxtwc_remove(struct platform_device *pdev)
 {
-	struct intel_soc_pmic *pmic = dev_get_drvdata(&pdev->dev);
-
 	sysfs_remove_group(&pdev->dev.kobj, &bxtwc_group);
-	mfd_remove_devices(&pdev->dev);
-	regmap_del_irq_chip(pmic->irq, pmic->irq_chip_data);
-	regmap_del_irq_chip(pmic->irq, pmic->irq_chip_data_level2);
-	regmap_del_irq_chip(pmic->irq, pmic->irq_chip_data_tmu);
 
 	return 0;
 }
-- 
2.7.4

[PATCH v4 7/9] mfd: intel_soc_pmic_bxtwc: use chained irqs for second level irq chips

[sathyanarayanan.kuppuswamy]

From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>

Whishkey cove PMIC has support to mask/unmask interrupts at two levels.
At first level we can mask/unmask interrupt domains like TMU, GPIO, ADC,
CHGR, BCU THERMAL and PWRBTN and at second level, it provides facility
to mask/unmask individual interrupts belong each of this domain. For
example, in case of TMU, at first level we have TMU interrupt domain,
and at second level we have two interrupts, wake alarm, system alarm that
belong to the TMU interrupt domain.

Currently, in this driver all first level irqs are registered as part of
irq chip(bxtwc_regmap_irq_chip). By default, after you register the irq
chip from your driver, all irqs in that chip will masked and can only be
enabled if that irq is requested using request_irq call. This is the
default Linux irq behavior model. And whenever a dependent device that
belongs to PMIC requests only the second level irq and not explicitly
unmask the first level irq, then in essence the second level irq will
still be disabled. For example, if TMU device driver request wake_alarm
irq and not explicitly unmask TMU level 1 irq then according to the default
Linux irq model,  wake_alarm irq will still be disabled. So the proper
solution to fix this issue is to use the chained irq chip concept. We
should chain all the second level chip irqs to the corresponding first
level irq. To do this, we need to create separate irq chips for every
group of second level irqs.

In case of TMU, when adding second level irq chip, instead of using pmic
irq we should use the corresponding first level irq. So the following
code will change from

ret = regmap_add_irq_chip(pmic->regmap, pmic->irq, ...)

to,

virq = regmap_irq_get_virq(&pmic->irq_chip_data, BXTWC_TMU_LVL1_IRQ);

ret = regmap_add_irq_chip(pmic->regmap, virq, ...)

Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/mfd/intel_soc_pmic_bxtwc.c | 174 +++++++++++++++++++++++++++++--------
 include/linux/mfd/intel_soc_pmic.h |   5 +-
 2 files changed, 144 insertions(+), 35 deletions(-)

Changes since v1:
 * Rebased on top of dev_* cleanup patch.
 * Fixed style & grammer issues reported by Lee Jones

Changes since v2:
 * Rebased on top of latest release.

Changes since v3:
 * None

diff --git a/drivers/mfd/intel_soc_pmic_bxtwc.c b/drivers/mfd/intel_soc_pmic_bxtwc.c
index feeda6e..bd78bef 100644
--- a/drivers/mfd/intel_soc_pmic_bxtwc.c
+++ b/drivers/mfd/intel_soc_pmic_bxtwc.c
@@ -82,18 +82,26 @@ enum bxtwc_irqs {
 	BXTWC_PWRBTN_IRQ,
 };
 
-enum bxtwc_irqs_level2 {
-	/* Level 2 */
+enum bxtwc_irqs_tmu {
+	BXTWC_TMU_IRQ = 0,
+};
+
+enum bxtwc_irqs_bcu {
 	BXTWC_BCU_IRQ = 0,
-	BXTWC_ADC_IRQ,
-	BXTWC_USBC_IRQ,
+};
+
+enum bxtwc_irqs_adc {
+	BXTWC_ADC_IRQ = 0,
+};
+
+enum bxtwc_irqs_chgr {
+	BXTWC_USBC_IRQ = 0,
 	BXTWC_CHGR0_IRQ,
 	BXTWC_CHGR1_IRQ,
-	BXTWC_CRIT_IRQ,
 };
 
-enum bxtwc_irqs_tmu {
-	BXTWC_TMU_IRQ = 0,
+enum bxtwc_irqs_crit {
+	BXTWC_CRIT_IRQ = 0,
 };
 
 static const struct regmap_irq bxtwc_regmap_irqs[] = {
@@ -108,17 +116,26 @@ static const struct regmap_irq bxtwc_regmap_irqs[] = {
 	REGMAP_IRQ_REG(BXTWC_PWRBTN_IRQ, 1, 0x03),
 };
 
-static const struct regmap_irq bxtwc_regmap_irqs_level2[] = {
+static const struct regmap_irq bxtwc_regmap_irqs_tmu[] = {
+	REGMAP_IRQ_REG(BXTWC_TMU_IRQ, 0, 0x06),
+};
+
+static const struct regmap_irq bxtwc_regmap_irqs_bcu[] = {
 	REGMAP_IRQ_REG(BXTWC_BCU_IRQ, 0, 0x1f),
-	REGMAP_IRQ_REG(BXTWC_ADC_IRQ, 1, 0xff),
-	REGMAP_IRQ_REG(BXTWC_USBC_IRQ, 2, BIT(5)),
-	REGMAP_IRQ_REG(BXTWC_CHGR0_IRQ, 2, 0x1f),
-	REGMAP_IRQ_REG(BXTWC_CHGR1_IRQ, 3, 0x1f),
-	REGMAP_IRQ_REG(BXTWC_CRIT_IRQ, 6, 0x03),
 };
 
-static const struct regmap_irq bxtwc_regmap_irqs_tmu[] = {
-	REGMAP_IRQ_REG(BXTWC_TMU_IRQ, 0, 0x06),
+static const struct regmap_irq bxtwc_regmap_irqs_adc[] = {
+	REGMAP_IRQ_REG(BXTWC_ADC_IRQ, 0, 0xff),
+};
+
+static const struct regmap_irq bxtwc_regmap_irqs_chgr[] = {
+	REGMAP_IRQ_REG(BXTWC_USBC_IRQ, 0, BIT(5)),
+	REGMAP_IRQ_REG(BXTWC_CHGR0_IRQ, 0, 0x1f),
+	REGMAP_IRQ_REG(BXTWC_CHGR1_IRQ, 1, 0x1f),
+};
+
+static const struct regmap_irq bxtwc_regmap_irqs_crit[] = {
+	REGMAP_IRQ_REG(BXTWC_CRIT_IRQ, 0, 0x03),
 };
 
 static struct regmap_irq_chip bxtwc_regmap_irq_chip = {
@@ -130,15 +147,6 @@ static struct regmap_irq_chip bxtwc_regmap_irq_chip = {
 	.num_regs = 2,
 };
 
-static struct regmap_irq_chip bxtwc_regmap_irq_chip_level2 = {
-	.name = "bxtwc_irq_chip_level2",
-	.status_base = BXTWC_BCUIRQ,
-	.mask_base = BXTWC_MBCUIRQ,
-	.irqs = bxtwc_regmap_irqs_level2,
-	.num_irqs = ARRAY_SIZE(bxtwc_regmap_irqs_level2),
-	.num_regs = 10,
-};
-
 static struct regmap_irq_chip bxtwc_regmap_irq_chip_tmu = {
 	.name = "bxtwc_irq_chip_tmu",
 	.status_base = BXTWC_TMUIRQ,
@@ -148,6 +156,42 @@ static struct regmap_irq_chip bxtwc_regmap_irq_chip_tmu = {
 	.num_regs = 1,
 };
 
+static struct regmap_irq_chip bxtwc_regmap_irq_chip_bcu = {
+	.name = "bxtwc_irq_chip_bcu",
+	.status_base = BXTWC_BCUIRQ,
+	.mask_base = BXTWC_MBCUIRQ,
+	.irqs = bxtwc_regmap_irqs_bcu,
+	.num_irqs = ARRAY_SIZE(bxtwc_regmap_irqs_bcu),
+	.num_regs = 1,
+};
+
+static struct regmap_irq_chip bxtwc_regmap_irq_chip_adc = {
+	.name = "bxtwc_irq_chip_adc",
+	.status_base = BXTWC_ADCIRQ,
+	.mask_base = BXTWC_MADCIRQ,
+	.irqs = bxtwc_regmap_irqs_adc,
+	.num_irqs = ARRAY_SIZE(bxtwc_regmap_irqs_adc),
+	.num_regs = 1,
+};
+
+static struct regmap_irq_chip bxtwc_regmap_irq_chip_chgr = {
+	.name = "bxtwc_irq_chip_chgr",
+	.status_base = BXTWC_CHGR0IRQ,
+	.mask_base = BXTWC_MCHGR0IRQ,
+	.irqs = bxtwc_regmap_irqs_chgr,
+	.num_irqs = ARRAY_SIZE(bxtwc_regmap_irqs_chgr),
+	.num_regs = 2,
+};
+
+static struct regmap_irq_chip bxtwc_regmap_irq_chip_crit = {
+	.name = "bxtwc_irq_chip_crit",
+	.status_base = BXTWC_CRITIRQ,
+	.mask_base = BXTWC_MCRITIRQ,
+	.irqs = bxtwc_regmap_irqs_crit,
+	.num_irqs = ARRAY_SIZE(bxtwc_regmap_irqs_crit),
+	.num_regs = 1,
+};
+
 static struct resource gpio_resources[] = {
 	DEFINE_RES_IRQ_NAMED(BXTWC_GPIO_LVL1_IRQ, "GPIO"),
 };
@@ -357,6 +401,24 @@ static const struct regmap_config bxtwc_regmap_config = {
 	.reg_read = regmap_ipc_byte_reg_read,
 };
 
+static int bxtwc_add_chained_irq_chip(struct intel_soc_pmic *pmic,
+				struct regmap_irq_chip_data *pdata,
+				int pirq, int irq_flags,
+				const struct regmap_irq_chip *chip,
+				struct regmap_irq_chip_data **data)
+{
+	int irq;
+
+	irq = regmap_irq_get_virq(pdata, pirq);
+	if (irq < 0) {
+		dev_err(pmic->dev, "failed to get virtual interrupt:%d\n", irq);
+		return irq;
+	}
+
+	return devm_regmap_add_irq_chip(pmic->dev, pmic->regmap, irq, irq_flags,
+					0, chip, data);
+}
+
 static int bxtwc_probe(struct platform_device *pdev)
 {
 	int ret;
@@ -408,21 +470,65 @@ static int bxtwc_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	ret = devm_regmap_add_irq_chip(&pdev->dev, pmic->regmap, pmic->irq,
-				       IRQF_ONESHOT | IRQF_SHARED,
-				       0, &bxtwc_regmap_irq_chip_level2,
-				       &pmic->irq_chip_data_level2);
+	ret = bxtwc_add_chained_irq_chip(pmic, pmic->irq_chip_data,
+					 BXTWC_TMU_LVL1_IRQ,
+					 IRQF_ONESHOT,
+					 &bxtwc_regmap_irq_chip_tmu,
+					 &pmic->irq_chip_data_tmu);
 	if (ret) {
-		dev_err(&pdev->dev, "Failed to add secondary IRQ chip\n");
+		dev_err(&pdev->dev, "Failed to add TMU IRQ chip\n");
 		return ret;
 	}
 
-	ret = devm_regmap_add_irq_chip(&pdev->dev, pmic->regmap, pmic->irq,
-				       IRQF_ONESHOT | IRQF_SHARED,
-				       0, &bxtwc_regmap_irq_chip_tmu,
-				       &pmic->irq_chip_data_tmu);
+	/* Add chained IRQ handler for BCU IRQs */
+	ret = bxtwc_add_chained_irq_chip(pmic, pmic->irq_chip_data,
+					 BXTWC_BCU_LVL1_IRQ,
+					 IRQF_ONESHOT,
+					 &bxtwc_regmap_irq_chip_bcu,
+					 &pmic->irq_chip_data_bcu);
+
+
 	if (ret) {
-		dev_err(&pdev->dev, "Failed to add TMU IRQ chip\n");
+		dev_err(&pdev->dev, "Failed to add BUC IRQ chip\n");
+		return ret;
+	}
+
+	/* Add chained IRQ handler for ADC IRQs */
+	ret = bxtwc_add_chained_irq_chip(pmic, pmic->irq_chip_data,
+					 BXTWC_ADC_LVL1_IRQ,
+					 IRQF_ONESHOT,
+					 &bxtwc_regmap_irq_chip_adc,
+					 &pmic->irq_chip_data_adc);
+
+
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to add ADC IRQ chip\n");
+		return ret;
+	}
+
+	/* Add chained IRQ handler for CHGR IRQs */
+	ret = bxtwc_add_chained_irq_chip(pmic, pmic->irq_chip_data,
+					 BXTWC_CHGR_LVL1_IRQ,
+					 IRQF_ONESHOT,
+					 &bxtwc_regmap_irq_chip_chgr,
+					 &pmic->irq_chip_data_chgr);
+
+
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to add CHGR IRQ chip\n");
+		return ret;
+	}
+
+	/* Add chained IRQ handler for CRIT IRQs */
+	ret = bxtwc_add_chained_irq_chip(pmic, pmic->irq_chip_data,
+					 BXTWC_CRIT_LVL1_IRQ,
+					 IRQF_ONESHOT,
+					 &bxtwc_regmap_irq_chip_crit,
+					 &pmic->irq_chip_data_crit);
+
+
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to add CRIT IRQ chip\n");
 		return ret;
 	}
 
diff --git a/include/linux/mfd/intel_soc_pmic.h b/include/linux/mfd/intel_soc_pmic.h
index 956caa0..5aacdb0 100644
--- a/include/linux/mfd/intel_soc_pmic.h
+++ b/include/linux/mfd/intel_soc_pmic.h
@@ -25,8 +25,11 @@ struct intel_soc_pmic {
 	int irq;
 	struct regmap *regmap;
 	struct regmap_irq_chip_data *irq_chip_data;
-	struct regmap_irq_chip_data *irq_chip_data_level2;
 	struct regmap_irq_chip_data *irq_chip_data_tmu;
+	struct regmap_irq_chip_data *irq_chip_data_bcu;
+	struct regmap_irq_chip_data *irq_chip_data_adc;
+	struct regmap_irq_chip_data *irq_chip_data_chgr;
+	struct regmap_irq_chip_data *irq_chip_data_crit;
 	struct device *dev;
 };
 
-- 
2.7.4

[PATCH v4 8/9] platform: x86: intel_bxtwc_tmu: remove first level irq unmask

[sathyanarayanan.kuppuswamy]

From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>

Currently in WCOVE PMIC mfd driver, all second level irq chips
are chained to the respective first level irqs. So there is no
need for explicitly unmasking the first level irq in this
driver. This patches removes this level 1 irq unmask support.

Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Darren Hart (VMware) <dvhart@infradead.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
---
 drivers/platform/x86/intel_bxtwc_tmu.c | 4 ----
 1 file changed, 4 deletions(-)

Changes since v1:
 * None

Changes since v2:
 * Rebased on top of latest release.

Changes since v3:
 * None

diff --git a/drivers/platform/x86/intel_bxtwc_tmu.c b/drivers/platform/x86/intel_bxtwc_tmu.c
index e202abd..ea865d4 100644
--- a/drivers/platform/x86/intel_bxtwc_tmu.c
+++ b/drivers/platform/x86/intel_bxtwc_tmu.c
@@ -92,10 +92,6 @@ static int bxt_wcove_tmu_probe(struct platform_device *pdev)
 	}
 	wctmu->irq = virq;
 
-	/* Enable TMU interrupts */
-	regmap_update_bits(wctmu->regmap, BXTWC_MIRQLVL1,
-				  BXTWC_MIRQLVL1_MTMU, 0);
-
 	/* Unmask TMU second level Wake & System alarm */
 	regmap_update_bits(wctmu->regmap, BXTWC_MTMUIRQ_REG,
 				  BXTWC_TMU_ALRM_MASK, 0);
-- 
2.7.4

[PATCH v4 9/9] usb: typec: typec_wcove: Use charger irq chip to get usbc virq

[sathyanarayanan.kuppuswamy]

From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>

Currently, in Whiskey cove PMIC driver, USBC IRQ is moved under charger
level2 irq chip. So use irq_chip_data_chgr to get the USBC virtual IRQ
number.

Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
---
 drivers/usb/typec/typec_wcove.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Changes since v3:
 * Added typec fix.

diff --git a/drivers/usb/typec/typec_wcove.c b/drivers/usb/typec/typec_wcove.c
index d5a7b21..00a4bd2 100644
--- a/drivers/usb/typec/typec_wcove.c
+++ b/drivers/usb/typec/typec_wcove.c
@@ -303,7 +303,7 @@ static int wcove_typec_probe(struct platform_device *pdev)
 	wcove->dev = &pdev->dev;
 	wcove->regmap = pmic->regmap;
 
-	ret = regmap_irq_get_virq(pmic->irq_chip_data_level2,
+	ret = regmap_irq_get_virq(pmic->irq_chip_data_chgr,
 				  platform_get_irq(pdev, 0));
 	if (ret < 0)
 		return ret;
-- 
2.7.4