linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mesih Kilinc <mesihkilinc-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-gpio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
Cc: Mesih Kilinc
	<mesihkilinc-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	Maxime Ripard
	<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
	Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
	Russell King <linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>,
	Daniel Lezcano
	<daniel.lezcano-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
	Marc Zyngier <marc.zyngier-5wv7dgnIgG8@public.gmane.org>,
	Linus Walleij
	<linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
	Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>,
	Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Julian Calaby
	<julian.calaby-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: [PATCH v6 00/17] initial support for "suniv" Allwinner new ARM9 SoC
Date: Sun,  2 Dec 2018 23:23:34 +0300	[thread overview]
Message-ID: <cover.1543781680.git.mesihkilinc@gmail.com> (raw)

This is the sixth version of patchset for Allwinner ARMv5 F1C100s
SoC. Addressed comments from Stephen Boyd, added signatures.

Changes since v5:
- Patch "clk: sunxi-ng: add support for suniv F1C100s SoC"
  - Fixed license identifier position

Changes since v4:
- Patch "dt-bindings: pinctrl: Add Allwinner suniv F1C100s pinctrl"
  - This patch applied for 4.21.
- Patch "pinctrl: sunxi: add support for suniv F1C100s (newer F-series SoCs)"
  - This patch applied for 4.21.
- Patch "dt-bindings: clock: Add Allwinner suniv F1C100s CCU"
  - Fixed license identifier position
  - Added DMA fields.
- Patch "clk: sunxi-ng: add support for suniv F1C100s SoC"
  - Added DMA reset and clock support.
- Patch "ARM: dts: suniv: add initial DTSI file for F1C100s"
  - Remove dt-binding headers. 
  - Fix uart0 pin label.
- Patch "ARM: suniv: f1c100s: add device tree for Lichee Pi Nano"
  - Fix uart0 pin label.

Changes since v3:
- Patch "ARM: Check ARCH_MULTI_V7 to differentiate ARMv5/v7 Allwinner SoCs"
  - Remove CONFIG_ARCH_SUNXI_Vx. Use ARCH_MULTI_Vx to differentiate SoC's
  - Change KConfig ARCH_SUNXI selection: 'select' to 'default'. 
- Patch "irqchip/sun4i: Add a struct to hold global variables"
  - Split irq_sun4i.c changes to 3 patch.
- Patch "pinctrl: sunxi: add support for suniv F1C100s (newer F-series SoCs)"
  - pinctrl-suniv-f1c100s: remove: disable_strict_mode = true
- Patch "ARM: dts: suniv: add initial DTSI file for F1C100s"
  - suniv-f1c100s.dtsi: remove unnecessary componenets.
  - Instead of patching drivers, add original compatible string with 
f1c100s compatibles.
  - Add Acked-by signatures.

Changes since v2:
- Patch "ARM: sunxi: add Allwinner ARMv5 SoCs"
  - Move SUN4I_TIMER option to ARCH_SUNXI
  - Added help text for MACH_SUNIV
- Patch "irqchip/sun4i: add support for suniv interrupt controller"
  - Defined sunxi_irq_chip_data struct and used it to differentiate
    registers between different chips.
- Patch " ARM: dts: suniv: add initial DTSI file for F1C100s"
  - Removed unnecessary fake clock.
  - Fixed compatible strings.

Changes since v1:
- Patch "ARM: add CONFIG_ARCH_SUNXI_V7 for differentiate ARMv5/v7
  Allwinner SoCs"
  - Instead of using a common bool config use a common menuconfig. 
  - Use ARCH_MULTI_V7 to differentiate V7 SoCs.
  - Addressed comment from Julian Calaby
- Patch "ARM: sunxi: add Allwinner ARMv5 SoCs"
  - Use ARCH_MULTI_V5 to differentiate V5 SoCs.
  - removed "allwinner,suniv" board compatible string
  - Added dt-bindings
- Patch "irqchip/sun4i: add support for suniv interrupt controller"
  - Added dt-bindings
  - Changed "allwinner,suniv-ic" to "allwinner,suniv-f1c100s-ic"
- Patch "clocksource: sun4i: add a compatible for suniv"
  - Added dt-bindings
  - Changed "allwinner,suniv-timer" to "allwinner,suniv-f1c100s-timer"
- Patch "pinctrl: sunxi: add support for suniv F1C100s (newer F-series SoCs)"
  - Added dt-bindings
  - Renamed suniv-pinctrl to suniv-f1c100s-pinctrl
- Patch "clk: sunxi-ng: add support for suniv F1C100s SoC"
  - Added dt-bindings
  - Renamed suniv-ccu to suniv-f1c100s-ccu
- Patch "ARM: suniv: f1c100s: add device tree for Lichee Pi Nano"
  - Addressed comment from Rask Ingemann Lambertsen

Thanks!

Mesih Kilinc (17):
  ARM: Check ARCH_MULTI_V7 to differentiate ARMv5/v7 Allwinner SoCs
  dt-bindings: arm: Add new Allwinner ARMv5 F1C100s SoC
  ARM: sunxi: add Allwinner ARMv5 SoCs
  dt-bindings: interrupt-controller: Add suniv interrupt-controller
  irqchip/sun4i: Add a struct to hold global variables
  irqchip/sun4i: Move IC specific register offsets to struct
  irqchip/sun4i: Add support for Allwinner ARMv5 F1C100s
  dt-bindings: timer: Add Allwinner suniv timer
  clocksource: sun4i: add a compatible for suniv
  dt-bindings: pinctrl: Add Allwinner suniv F1C100s pinctrl
  pinctrl: sunxi: add support for suniv F1C100s (newer F-series SoCs)
  dt-bindings: clock: Add Allwinner suniv F1C100s CCU
  clk: sunxi-ng: add support for suniv F1C100s SoC
  dt-bindings: sram: Add Allwinner suniv F1C100s
  dt-bindings: watchdog: Add Allwinner ARMv5 F1C100s wdt
  ARM: dts: suniv: add initial DTSI file for F1C100s
  ARM: suniv: f1c100s: add device tree for Lichee Pi Nano

 Documentation/devicetree/bindings/arm/sunxi.txt    |   1 +
 .../devicetree/bindings/clock/sunxi-ccu.txt        |   1 +
 .../interrupt-controller/allwinner,sun4i-ic.txt    |   4 +-
 .../bindings/pinctrl/allwinner,sunxi-pinctrl.txt   |   1 +
 .../devicetree/bindings/sram/sunxi-sram.txt        |   4 +
 .../bindings/timer/allwinner,sun4i-timer.txt       |   4 +-
 .../devicetree/bindings/watchdog/sunxi-wdt.txt     |   1 +
 arch/arm/boot/dts/Makefile                         |   2 +
 arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts  |  26 +
 arch/arm/boot/dts/suniv-f1c100s.dtsi               | 147 ++++++
 arch/arm/mach-sunxi/Kconfig                        |  19 +-
 arch/arm/mach-sunxi/sunxi.c                        |  10 +
 drivers/clk/sunxi-ng/Kconfig                       |   5 +
 drivers/clk/sunxi-ng/Makefile                      |   1 +
 drivers/clk/sunxi-ng/ccu-suniv-f1c100s.c           | 541 +++++++++++++++++++++
 drivers/clk/sunxi-ng/ccu-suniv-f1c100s.h           |  34 ++
 drivers/clocksource/sun4i_timer.c                  |   5 +-
 drivers/irqchip/irq-sun4i.c                        | 106 ++--
 drivers/pinctrl/sunxi/Kconfig                      |   4 +
 drivers/pinctrl/sunxi/Makefile                     |   1 +
 drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c      | 416 ++++++++++++++++
 include/dt-bindings/clock/suniv-ccu-f1c100s.h      |  70 +++
 include/dt-bindings/reset/suniv-ccu-f1c100s.h      |  38 ++
 23 files changed, 1408 insertions(+), 33 deletions(-)
 create mode 100644 arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts
 create mode 100644 arch/arm/boot/dts/suniv-f1c100s.dtsi
 create mode 100644 drivers/clk/sunxi-ng/ccu-suniv-f1c100s.c
 create mode 100644 drivers/clk/sunxi-ng/ccu-suniv-f1c100s.h
 create mode 100644 drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c
 create mode 100644 include/dt-bindings/clock/suniv-ccu-f1c100s.h
 create mode 100644 include/dt-bindings/reset/suniv-ccu-f1c100s.h

-- 
2.7.4

             reply	other threads:[~2018-12-02 20:23 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-02 20:23 Mesih Kilinc [this message]
2018-12-02 20:23 ` [PATCH v6 07/17] irqchip/sun4i: Add support for Allwinner ARMv5 F1C100s Mesih Kilinc
     [not found] ` <cover.1543781680.git.mesihkilinc-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2018-12-02 20:23   ` [PATCH v6 01/17] ARM: Check ARCH_MULTI_V7 to differentiate ARMv5/v7 Allwinner SoCs Mesih Kilinc
     [not found]     ` <1a4e6f2b1d6aa5a079e2afb5d1ddf39f830eb8be.1543781680.git.mesihkilinc-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2018-12-03  8:56       ` Maxime Ripard
2018-12-02 20:23   ` [PATCH v6 02/17] dt-bindings: arm: Add new Allwinner ARMv5 F1C100s SoC Mesih Kilinc
     [not found]     ` <6fa3cf509379a0888388821eef3e322c014df5b8.1543781680.git.mesihkilinc-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2018-12-03  8:57       ` Maxime Ripard
2018-12-02 20:23   ` [PATCH v6 03/17] ARM: sunxi: add Allwinner ARMv5 SoCs Mesih Kilinc
2018-12-02 20:23   ` [PATCH v6 04/17] dt-bindings: interrupt-controller: Add suniv interrupt-controller Mesih Kilinc
2018-12-02 20:23   ` [PATCH v6 05/17] irqchip/sun4i: Add a struct to hold global variables Mesih Kilinc
2018-12-02 20:23   ` [PATCH v6 06/17] irqchip/sun4i: Move IC specific register offsets to struct Mesih Kilinc
2018-12-02 20:23   ` [PATCH v6 08/17] dt-bindings: timer: Add Allwinner suniv timer Mesih Kilinc
2018-12-02 20:23   ` [PATCH v6 09/17] clocksource: sun4i: add a compatible for suniv Mesih Kilinc
2018-12-02 20:23   ` [PATCH v6 10/17] dt-bindings: pinctrl: Add Allwinner suniv F1C100s pinctrl Mesih Kilinc
2018-12-02 20:23   ` [PATCH v6 11/17] pinctrl: sunxi: add support for suniv F1C100s (newer F-series SoCs) Mesih Kilinc
2018-12-02 20:23   ` [PATCH v6 12/17] dt-bindings: clock: Add Allwinner suniv F1C100s CCU Mesih Kilinc
2018-12-02 20:23   ` [PATCH v6 13/17] clk: sunxi-ng: add support for suniv F1C100s SoC Mesih Kilinc
     [not found]     ` <b3d266d9f5f0f7504701c3bbec819acde6d19257.1543781680.git.mesihkilinc-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2018-12-03  8:55       ` Maxime Ripard
2018-12-03 19:08         ` Mesih Kilinc
2018-12-02 20:23   ` [PATCH v6 14/17] dt-bindings: sram: Add Allwinner suniv F1C100s Mesih Kilinc
2018-12-03  8:58     ` Maxime Ripard
2018-12-02 20:23   ` [PATCH v6 15/17] dt-bindings: watchdog: Add Allwinner ARMv5 F1C100s wdt Mesih Kilinc
     [not found]     ` <fb0c64319cbb5c2b062844ff38aba7b7323eefcb.1543781680.git.mesihkilinc-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2018-12-03  8:58       ` Maxime Ripard
2018-12-02 20:23   ` [PATCH v6 17/17] ARM: suniv: f1c100s: add device tree for Lichee Pi Nano Mesih Kilinc
     [not found]     ` <125b26f154ad1373179d67fcde30df056e883ac8.1543781680.git.mesihkilinc-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2018-12-03  9:03       ` Maxime Ripard
2018-12-02 20:23 ` [PATCH v6 16/17] ARM: dts: suniv: add initial DTSI file for F1C100s Mesih Kilinc
     [not found]   ` <dafe3e548064535cfc32934c079b53a5c45fcd48.1543781680.git.mesihkilinc-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2018-12-03  9:01     ` Maxime Ripard
2018-12-07 18:16 ` [PATCH v6 00/17] initial support for "suniv" Allwinner new ARM9 SoC Marc Zyngier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=cover.1543781680.git.mesihkilinc@gmail.com \
    --to=mesihkilinc-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
    --cc=daniel.lezcano-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=icenowy-h8G6r0blFSE@public.gmane.org \
    --cc=julian.calaby-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-gpio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
    --cc=marc.zyngier-5wv7dgnIgG8@public.gmane.org \
    --cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=wens-jdAy2FN1RRM@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).