* [PATCH V2 0/5] virtio: Add virtio-device bindings
@ 2021-07-22 9:56 Viresh Kumar
2021-07-22 9:56 ` [PATCH V2 3/5] dt-bindings: gpio: Add bindings for gpio-virtio Viresh Kumar
0 siblings, 1 reply; 2+ messages in thread
From: Viresh Kumar @ 2021-07-22 9:56 UTC (permalink / raw)
To: Jason Wang, Michael S. Tsirkin, Rob Herring, Arnd Bergmann,
Jean-Philippe Brucker, Bartosz Golaszewski, Linus Walleij,
Viresh Kumar
Cc: Vincent Guittot, Bill Mills, Alex Bennée,
Enrico Weigelt, metux IT consult, Jie Deng, devicetree,
linux-kernel, virtualization, linux-gpio, linux-i2c, Wolfram Sang
Hi,
Currently the DT only provides support for following node types for virtio-mmio
nodes:
virtio_mmio@a000000 {
dma-coherent;
interrupts = <0x00 0x10 0x01>;
reg = <0x00 0xa000000 0x00 0x200>;
compatible = "virtio,mmio";
};
Here, each virtio-mmio corresponds to a virtio-device. But there is no way for
other users in the DT to show their dependency on virtio devices.
This patchset provides that support.
The first patch adds virtio-device bindings to allow for device sub-nodes to be
present and the second patch updates the virtio core to update the of_node.
Other patches add bindings for i2c and gpio devices.
Tested on x86 with qemu for arm64.
V1->V2:
- The changes (both binding and code) are made at virtio level, instead of
virtio-mmio. This allows the same to be used by all device types, irrespective
of the transport mechanism.
- Dropped the reg property and used compatible in the form "virtio,<DID>".
- Dropped dt-bindings/virtio/virtio_ids.h.
- Add a patch to sync virtio-ids from spec, required for the last patch.
--
Viresh
Viresh Kumar (5):
dt-bindings: virtio: Add binding for virtio devices
dt-bindings: i2c: Add bindings for i2c-virtio
dt-bindings: gpio: Add bindings for gpio-virtio
uapi: virtio_ids: Sync ids with specification
virtio: Bind virtio device to device-tree node
.../devicetree/bindings/gpio/gpio-virtio.yaml | 60 +++++++++++++++++
.../devicetree/bindings/i2c/i2c-virtio.yaml | 51 ++++++++++++++
.../devicetree/bindings/virtio/mmio.yaml | 2 +-
.../bindings/virtio/virtio-device.yaml | 47 +++++++++++++
drivers/virtio/virtio.c | 67 ++++++++++++++++++-
include/uapi/linux/virtio_ids.h | 12 ++++
6 files changed, 235 insertions(+), 4 deletions(-)
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-virtio.yaml
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-virtio.yaml
create mode 100644 Documentation/devicetree/bindings/virtio/virtio-device.yaml
--
2.31.1.272.g89b43f80a514
^ permalink raw reply [flat|nested] 2+ messages in thread
* [PATCH V2 3/5] dt-bindings: gpio: Add bindings for gpio-virtio
2021-07-22 9:56 [PATCH V2 0/5] virtio: Add virtio-device bindings Viresh Kumar
@ 2021-07-22 9:56 ` Viresh Kumar
0 siblings, 0 replies; 2+ messages in thread
From: Viresh Kumar @ 2021-07-22 9:56 UTC (permalink / raw)
To: Jason Wang, Michael S. Tsirkin, Rob Herring, Arnd Bergmann,
Jean-Philippe Brucker, Linus Walleij, Bartosz Golaszewski,
Viresh Kumar
Cc: Vincent Guittot, Bill Mills, Alex Bennée,
Enrico Weigelt, metux IT consult, Jie Deng, devicetree,
linux-kernel, virtualization, linux-gpio
This patch adds binding for virtio GPIO controller, it is based on
virtio-device bindings.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
.../devicetree/bindings/gpio/gpio-virtio.yaml | 60 +++++++++++++++++++
1 file changed, 60 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-virtio.yaml
diff --git a/Documentation/devicetree/bindings/gpio/gpio-virtio.yaml b/Documentation/devicetree/bindings/gpio/gpio-virtio.yaml
new file mode 100644
index 000000000000..96108cfb7a08
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-virtio.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-virtio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Virtio GPIO controller
+
+maintainers:
+ - Viresh Kumar <viresh.kumar@linaro.org>
+
+allOf:
+ - $ref: /schemas/gpio/gpio.yaml#
+ - $ref: /schemas/virtio/virtio-device.yaml#
+
+description:
+ Virtio GPIO controller, see /schemas/virtio/virtio-device.yaml for more
+ details.
+
+properties:
+ $nodename:
+ pattern: '^gpio-virtio(-[a-z0-9]+)?$'
+
+ compatible:
+ const: virtio,29
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 2
+
+required:
+ - compatible
+ - gpio-controller
+ - "#gpio-cells"
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ virtio@3000 {
+ compatible = "virtio,mmio";
+ reg = <0x3000 0x100>;
+ interrupts = <41>;
+
+ gpio: gpio-virtio {
+ compatible = "virtio,29";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+...
--
2.31.1.272.g89b43f80a514
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-07-22 9:57 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2021-07-22 9:56 [PATCH V2 0/5] virtio: Add virtio-device bindings Viresh Kumar
2021-07-22 9:56 ` [PATCH V2 3/5] dt-bindings: gpio: Add bindings for gpio-virtio Viresh Kumar
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).