[PATCH 0/2] renesas: r8a779g0: Add missing SCIF_CLK2

[Geert Uytterhoeven <geert+renesas@glider.be>]

	Hi all,

R-Car V4H actually has two SCIF_CLK pins.
The second pin provides the SCIF_CLK signal for HSCIF2 and SCIF4.
The first pin provides the SCIF_CLK signal for the other (H)SCIF
instances.

This patch series adds the missing SCIF_CLK2 pin group/function to the
R-Car V4H pin control driver and to the R-Car V4H DTS file, and fixes
the HSCIF2 and SCIF4 DT descriptions to refer to the proper clock.

As SCIF_CLK2 cannot be used on the White Hawk development board, I could
not test proper operation of HSCIF2 and SCIF4.  I did verify that HSCIF2
and SCIF4 do not operate properly when trying to use (the first and thus
incorrect) SCIF_CLK as the clock source.

I plan to queue these in renesas-pinctrl resp. renesas-devel for v6.9.

Thanks for your comments!

Geert Uytterhoeven (2):
  pinctrl: renesas: r8a779g0: Add missing SCIF_CLK2 pin group/function
  arm64: dts: renesas: r8a779g0: Add missing SCIF_CLK2

 arch/arm64/boot/dts/renesas/r8a779g0.dtsi | 12 +++++++++---
 drivers/pinctrl/renesas/pfc-r8a779g0.c    | 14 ++++++++++++++
 2 files changed, 23 insertions(+), 3 deletions(-)

-- 
2.34.1

Gr{oetje,eeting}s,

						Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
							    -- Linus Torvalds