Re: [PATCH v4 07/10] arm64: select HAVE_SHARED_GPIOS for ARCH_QCOM

[Jon Hunter <jonathanh@nvidia.com>]

On 26/11/2025 14:54, Bartosz Golaszewski wrote:
> On Wed, Nov 26, 2025 at 3:51 PM Jon Hunter <jonathanh@nvidia.com> wrote:
>>
>>
>> On 26/11/2025 14:28, Bartosz Golaszewski wrote:
>>> On Wed, Nov 26, 2025 at 3:24 PM Jon Hunter <jonathanh@nvidia.com> wrote:
>>>>
>>>> Hi Bartosz,
>>>>
>>>> On 12/11/2025 13:55, Bartosz Golaszewski wrote:
>>>>> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
>>>>>
>>>>> Some qualcomm platforms use shared GPIOs. Enable support for them by
>>>>> selecting the Kconfig switch provided by GPIOLIB.
>>>>>
>>>>> Acked-by: Linus Walleij <linus.walleij@linaro.org>
>>>>> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
>>>>> ---
>>>>>     arch/arm64/Kconfig.platforms | 1 +
>>>>>     1 file changed, 1 insertion(+)
>>>>>
>>>>> diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
>>>>> index 13173795c43d4f28e2d47acc700f80a165d44671..3dbff0261f0add0516d8cb3fd0f29e277af94f20 100644
>>>>> --- a/arch/arm64/Kconfig.platforms
>>>>> +++ b/arch/arm64/Kconfig.platforms
>>>>> @@ -316,6 +316,7 @@ config ARCH_QCOM
>>>>>         select GPIOLIB
>>>>>         select PINCTRL
>>>>>         select HAVE_PWRCTRL if PCI
>>>>> +     select HAVE_SHARED_GPIOS
>>>>>         help
>>>>>           This enables support for the ARMv8 based Qualcomm chipsets.
>>>>>
>>>>
>>>> I have noticed the following kernel warning on our Tegra platforms ...
>>>>
>>>>     ERR KERN OF: /__symbols__: could not find phandle 794981747
>>>>
>>>> Bisect is pointing to this commit and reverting this does prevent it. I
>>>> am not sure if anyone else has seen this?
>>>>
>>>
>>> I assume it comes from drivers/of/base.c:1295 - could you please post
>>> a stack trace of how you're getting there?
>>
>> Yes looks like it does and I see ...
>>
>> [    0.123356] OF: /__symbols__: could not find phandle 794981747
>> [    0.123401] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.18.0-rc7-next-20251126-00002-g1cd98992c487-dirty #19 PREEMPT
>> [    0.123418] Hardware name: NVIDIA Jetson AGX Xavier Developer Kit (DT)
>> [    0.123447] Call trace:
>> [    0.123453]  show_stack+0x18/0x24 (C)
>> [    0.123472]  dump_stack_lvl+0x74/0x8c
>> [    0.123487]  dump_stack+0x18/0x24
>> [    0.123518]  of_phandle_iterator_next+0x18c/0x1c4
>> [    0.123536]  of_count_phandle_with_args+0xa0/0xc8
>> [    0.123551]  gpio_shared_of_traverse+0xb8/0x47c
>> [    0.123566]  gpio_shared_of_traverse+0x158/0x47c
>> [    0.123578]  gpio_shared_init+0x110/0x1f0
>> [    0.123595]  do_one_initcall+0x7c/0x1c0
>> [    0.123607]  kernel_init_freeable+0x204/0x2e0
>> [    0.123622]  kernel_init+0x20/0x1d8
>> [    0.123637]  ret_from_fork+0x10/0x20
>>
> 
> Is the device-tree used here upstream? Can you enable DEBUG_GPIO in
> Kconfig and post the entire kernel log on pastebin?

Yes this is the upstream device-tree in 
arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts. OK I will get the 
entire log for review.

Jon

-- 
nvpublic