From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: Raag Jadav <raag.jadav@intel.com>
Cc: Hans de Goede <hansg@kernel.org>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
linus.walleij@linaro.org, brgl@bgdev.pl,
platform-driver-x86@vger.kernel.org, linux-gpio@vger.kernel.org,
LKML <linux-kernel@vger.kernel.org>,
Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Subject: Re: [PATCH v3 2/2] gpio: elkhartlake: Convert to auxiliary driver
Date: Wed, 19 Nov 2025 13:42:02 +0200 (EET) [thread overview]
Message-ID: <d6aa3721-0425-49e7-e5dd-8fdc8e7cb1d5@linux.intel.com> (raw)
In-Reply-To: <20251112034040.457801-3-raag.jadav@intel.com>
[-- Attachment #1: Type: text/plain, Size: 4067 bytes --]
On Wed, 12 Nov 2025, Raag Jadav wrote:
> Since PCI device should not be abusing platform device, MFD parent to
> platform child path is no longer being pursued for this driver. Convert
> it to auxiliary driver, which will be used by EHL PSE auxiliary device.
>
> Signed-off-by: Raag Jadav <raag.jadav@intel.com>
> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
> drivers/gpio/Kconfig | 2 +-
> drivers/gpio/gpio-elkhartlake.c | 36 +++++++++++++++++----------------
> 2 files changed, 20 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index 7ee3afbc2b05..d4b4451b4696 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -1413,7 +1413,7 @@ config HTC_EGPIO
>
> config GPIO_ELKHARTLAKE
> tristate "Intel Elkhart Lake PSE GPIO support"
> - depends on X86 || COMPILE_TEST
> + depends on INTEL_EHL_PSE_IO
> select GPIO_TANGIER
> help
> Select this option to enable GPIO support for Intel Elkhart Lake
> diff --git a/drivers/gpio/gpio-elkhartlake.c b/drivers/gpio/gpio-elkhartlake.c
> index 95de52d2cc63..b96e7928b6e5 100644
> --- a/drivers/gpio/gpio-elkhartlake.c
> +++ b/drivers/gpio/gpio-elkhartlake.c
> @@ -2,43 +2,46 @@
> /*
> * Intel Elkhart Lake PSE GPIO driver
> *
> - * Copyright (c) 2023 Intel Corporation.
> + * Copyright (c) 2023, 2025 Intel Corporation.
> *
> * Authors: Pandith N <pandith.n@intel.com>
> * Raag Jadav <raag.jadav@intel.com>
> */
>
> +#include <linux/auxiliary_bus.h>
> #include <linux/device.h>
> #include <linux/err.h>
> #include <linux/module.h>
> -#include <linux/platform_device.h>
> #include <linux/pm.h>
>
> +#include <linux/ehl_pse_io_aux.h>
> +
> #include "gpio-tangier.h"
>
> /* Each Intel EHL PSE GPIO Controller has 30 GPIO pins */
> #define EHL_PSE_NGPIO 30
>
> -static int ehl_gpio_probe(struct platform_device *pdev)
> +static int ehl_gpio_probe(struct auxiliary_device *adev, const struct auxiliary_device_id *id)
> {
> - struct device *dev = &pdev->dev;
> + struct device *dev = &adev->dev;
> + struct ehl_pse_io_data *data;
> struct tng_gpio *priv;
> - int irq, ret;
> + int ret;
>
> - irq = platform_get_irq(pdev, 0);
> - if (irq < 0)
> - return irq;
> + data = dev_get_platdata(dev);
> + if (!data)
> + return -ENODATA;
>
> priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> if (!priv)
> return -ENOMEM;
>
> - priv->reg_base = devm_platform_ioremap_resource(pdev, 0);
> + priv->reg_base = devm_ioremap_resource(dev, &data->mem);
> if (IS_ERR(priv->reg_base))
> return PTR_ERR(priv->reg_base);
>
> priv->dev = dev;
> - priv->irq = irq;
> + priv->irq = data->irq;
>
> priv->info.base = -1;
> priv->info.ngpio = EHL_PSE_NGPIO;
> @@ -51,25 +54,24 @@ static int ehl_gpio_probe(struct platform_device *pdev)
> if (ret)
> return dev_err_probe(dev, ret, "tng_gpio_probe error\n");
>
> - platform_set_drvdata(pdev, priv);
> + auxiliary_set_drvdata(adev, priv);
> return 0;
> }
>
> -static const struct platform_device_id ehl_gpio_ids[] = {
> - { "gpio-elkhartlake" },
> +static const struct auxiliary_device_id ehl_gpio_ids[] = {
> + { EHL_PSE_IO_NAME "." EHL_PSE_GPIO_NAME },
> { }
> };
> -MODULE_DEVICE_TABLE(platform, ehl_gpio_ids);
> +MODULE_DEVICE_TABLE(auxiliary, ehl_gpio_ids);
>
> -static struct platform_driver ehl_gpio_driver = {
> +static struct auxiliary_driver ehl_gpio_driver = {
> .driver = {
> - .name = "gpio-elkhartlake",
> .pm = pm_sleep_ptr(&tng_gpio_pm_ops),
> },
> .probe = ehl_gpio_probe,
> .id_table = ehl_gpio_ids,
> };
> -module_platform_driver(ehl_gpio_driver);
> +module_auxiliary_driver(ehl_gpio_driver);
>
> MODULE_AUTHOR("Pandith N <pandith.n@intel.com>");
> MODULE_AUTHOR("Raag Jadav <raag.jadav@intel.com>");
>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
--
i.
next prev parent reply other threads:[~2025-11-19 11:42 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-12 3:40 [PATCH v3 0/2] Introduce Intel Elkhart Lake PSE I/O Raag Jadav
2025-11-12 3:40 ` [PATCH v3 1/2] platform/x86/intel: " Raag Jadav
2025-11-19 11:27 ` Ilpo Järvinen
2025-11-12 3:40 ` [PATCH v3 2/2] gpio: elkhartlake: Convert to auxiliary driver Raag Jadav
2025-11-19 11:42 ` Ilpo Järvinen [this message]
2025-11-12 15:14 ` [PATCH v3 0/2] Introduce Intel Elkhart Lake PSE I/O Bartosz Golaszewski
2025-11-19 6:40 ` Raag Jadav
2025-11-19 7:29 ` Bartosz Golaszewski
2025-11-19 13:09 ` Bartosz Golaszewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d6aa3721-0425-49e7-e5dd-8fdc8e7cb1d5@linux.intel.com \
--to=ilpo.jarvinen@linux.intel.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=bartosz.golaszewski@linaro.org \
--cc=brgl@bgdev.pl \
--cc=hansg@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=platform-driver-x86@vger.kernel.org \
--cc=raag.jadav@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).