[PATCH v2 00/40] pinctrl/arm64: qcom: fix some of Qualcomm pinctrl schema warnings

[PATCH v2 00/40] pinctrl/arm64: qcom: fix some of Qualcomm pinctrl schema warnings

[Krzysztof Kozlowski]

Hi,

That's a set for some of arm64 pinctrl bindings fixing most common warnings.  I
have a plan to continue this for remaining arm64 (sm8250 needs updates) and for
arm.

Changes since v1
================
1. Correct commit msg in commits "fix matching pin config".
2. Correct commit msg in commit #2 .
3. Add Rb tags.

Dependencies
============
1. dt-bindings are independent of DTS patches.

Best regards,
Krzysztof

Krzysztof Kozlowski (40):
  dt-bindings: pinctrl: qcom,sm6115-pinctrl: fix matching pin config
  dt-bindings: pinctrl: qcom,sm6115-pinctrl: require function on GPIOs
  dt-bindings: pinctrl: qcom,sm6115-pinctrl: fix indentation in example
  dt-bindings: pinctrl: qcom,sm6125-pinctrl: fix matching pin config
  dt-bindings: pinctrl: qcom,sm6125-pinctrl: do not require function on
    non-GPIOs
  dt-bindings: pinctrl: qcom,sm6125-pinctrl: extend example
  dt-bindings: pinctrl: qcom,sm6350-pinctrl: fix matching pin config
  dt-bindings: pinctrl: qcom,sm6350-pinctrl: do not require function on
    non-GPIOs
  dt-bindings: pinctrl: qcom,sm6350-pinctrl: fix indentation in example
  dt-bindings: pinctrl: qcom,sm6375-pinctrl: fix matching pin config
  dt-bindings: pinctrl: qcom,sm6375-pinctrl: do not require function on
    non-GPIOs
  dt-bindings: pinctrl: qcom,sm6375-pinctrl: fix indentation in example
  dt-bindings: pinctrl: qcom,sm8250-pinctrl: do not require function on
    non-GPIOs
  dt-bindings: pinctrl: qcom,sm8250-pinctrl: reference tlmm common pins
  dt-bindings: pinctrl: qcom,sm8250-pinctrl: fix indentation in example
  dt-bindings: pinctrl: qcom,sm8350-pinctrl: fix matching pin config
  dt-bindings: pinctrl: qcom,sm8350-pinctrl: fix indentation in example
  dt-bindings: pinctrl: qcom,sm8350-pinctrl: do not require function on
    non-GPIOs
  dt-bindings: pinctrl: qcom,sm8450-pinctrl: fix matching pin config
  dt-bindings: pinctrl: qcom,sm8450-pinctrl: fix indentation in example
  dt-bindings: pinctrl: qcom,sm8450-pinctrl: do not require function on
    non-GPIOs
  dt-bindings: pinctrl: qcom,sm8450-pinctrl: add gpio-line-names
  dt-bindings: pinctrl: qcom,sc7280-pinctrl: correct number of GPIOs
  dt-bindings: pinctrl: qcom,sc7280-pinctrl: do not require function on
    non-GPIOs
  dt-bindings: pinctrl: qcom,sc7280-pinctrl: add gpio-line-names
  dt-bindings: pinctrl: qcom,sc7280-pinctrl: reference tlmm schema
  dt-bindings: pinctrl: qcom,sc7280-pinctrl: fix indentation in example
  dt-bindings: pinctrl: qcom,sc8180x-pinctrl: fix matching pin config
  dt-bindings: pinctrl: qcom,sc8180x-pinctrl: do not require function on
    non-GPIOs
  dt-bindings: pinctrl: qcom,sc8180x-pinctrl: fix indentation in example
  dt-bindings: pinctrl: qcom,sc8280xp-pinctrl: fix matching pin config
  dt-bindings: pinctrl: qcom,sc8280xp-pinctrl: do not require function
    on non-GPIOs
  dt-bindings: pinctrl: qcom,sc8280xp-pinctrl: fix indentation in
    example
  arm64: dts: qcom: sm6125: align TLMM pin configuration with DT schema
  arm64: dts: qcom: sm6350: align TLMM pin configuration with DT schema
  arm64: dts: qcom: sm8350-sagami: correct TS pin property
  arm64: dts: qcom: sm8350: align TLMM pin configuration with DT schema
  arm64: dts: qcom: sm8450: align TLMM pin configuration with DT schema
  arm64: dts: qcom: sc7280: align TLMM pin configuration with DT schema
  arm64: dts: qcom: sc7280-herobrine: correct TLMM gpio-line-names

 .../bindings/pinctrl/qcom,sc7280-pinctrl.yaml |  55 +--
 .../pinctrl/qcom,sc8180x-pinctrl.yaml         |  79 +++--
 .../pinctrl/qcom,sc8280xp-pinctrl.yaml        |  73 ++--
 .../bindings/pinctrl/qcom,sm6115-pinctrl.yaml |  94 +++---
 .../bindings/pinctrl/qcom,sm6125-pinctrl.yaml |  61 +++-
 .../bindings/pinctrl/qcom,sm6350-pinctrl.yaml |  73 ++--
 .../bindings/pinctrl/qcom,sm6375-tlmm.yaml    |  73 ++--
 .../bindings/pinctrl/qcom,sm8250-pinctrl.yaml |  41 ++-
 .../bindings/pinctrl/qcom,sm8350-pinctrl.yaml |  73 ++--
 .../bindings/pinctrl/qcom,sm8450-pinctrl.yaml |  82 +++--
 .../boot/dts/qcom/sc7280-herobrine-crd.dts    |   2 -
 .../arm64/boot/dts/qcom/sc7280-herobrine.dtsi |  44 +--
 .../arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi |   8 +-
 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi      |  20 +-
 arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi    |  14 +-
 arch/arm64/boot/dts/qcom/sc7280.dtsi          | 316 +++++++++---------
 .../qcom/sm6125-sony-xperia-seine-pdx201.dts  |   4 +-
 arch/arm64/boot/dts/qcom/sm6125.dtsi          |  10 +-
 arch/arm64/boot/dts/qcom/sm6350.dtsi          |  14 +-
 .../dts/qcom/sm8350-sony-xperia-sagami.dtsi   |   4 +-
 arch/arm64/boot/dts/qcom/sm8350.dtsi          |  44 +--
 .../qcom/sm8450-sony-xperia-nagara-pdx223.dts |  12 +-
 arch/arm64/boot/dts/qcom/sm8450.dtsi          | 152 ++++-----
 23 files changed, 733 insertions(+), 615 deletions(-)

-- 
2.34.1

[PATCH v2 01/40] dt-bindings: pinctrl: qcom,sm6115-pinctrl: fix matching pin config

[Krzysztof Kozlowski]

Matching PMIC GPIOs config nodes within a '-state' node by '.*' pattern
does not work as expected because of linux,phandle in the DTB:

    'pins' is a required property
    'function' is a required property
    'rx', 'tx' do not match any of the regexes: 'pinctrl-[0-9]+'
    [[59]] is not of type 'object'

Make the schema stricter and expect such nodes to be followed with a
'-pins' suffix.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Iskren Chernev <iskren.chernev@gmail.com>
---
 .../bindings/pinctrl/qcom,sm6115-pinctrl.yaml         | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml
index d8443811767d..8a2b4767c7b6 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml
@@ -59,8 +59,9 @@ patternProperties:
     oneOf:
       - $ref: "#/$defs/qcom-sm6115-tlmm-state"
       - patternProperties:
-          ".*":
+          "-pins$":
             $ref: "#/$defs/qcom-sm6115-tlmm-state"
+        additionalProperties: false
 
 '$defs':
   qcom-sm6115-tlmm-state:
@@ -155,25 +156,25 @@ examples:
                 gpio-ranges = <&tlmm 0 0 114>;
 
                 sdc2_on_state: sdc2-on-state {
-                        clk {
+                        clk-pins {
                                 pins = "sdc2_clk";
                                 bias-disable;
                                 drive-strength = <16>;
                         };
 
-                        cmd {
+                        cmd-pins {
                                 pins = "sdc2_cmd";
                                 bias-pull-up;
                                 drive-strength = <10>;
                         };
 
-                        data {
+                        data-pins {
                                 pins = "sdc2_data";
                                 bias-pull-up;
                                 drive-strength = <10>;
                         };
 
-                        sd-cd {
+                        sd-cd-pins {
                                 pins = "gpio88";
                                 function = "gpio";
                                 bias-pull-up;
-- 
2.34.1

[PATCH v2 02/40] dt-bindings: pinctrl: qcom,sm6115-pinctrl: require function on GPIOs

[Krzysztof Kozlowski]

Require function on GPIOs (so not on SD card pins).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Iskren Chernev <iskren.chernev@gmail.com>
---
 .../bindings/pinctrl/qcom,sm6115-pinctrl.yaml         | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml
index 8a2b4767c7b6..28b29bf714b4 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml
@@ -69,7 +69,6 @@ patternProperties:
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
 
     properties:
       pins:
@@ -121,6 +120,16 @@ patternProperties:
     required:
       - pins
 
+    allOf:
+      - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+      - if:
+          properties:
+            pins:
+              pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-2])$"
+        then:
+          required:
+            - function
+
     additionalProperties: false
 
 allOf:
-- 
2.34.1

[PATCH v2 03/40] dt-bindings: pinctrl: qcom,sm6115-pinctrl: fix indentation in example

[Krzysztof Kozlowski]

Bindings example should be indented with 4-spaces.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Iskren Chernev <iskren.chernev@gmail.com>
---
 .../bindings/pinctrl/qcom,sm6115-pinctrl.yaml | 80 +++++++++----------
 1 file changed, 40 insertions(+), 40 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml
index 28b29bf714b4..e39fbb36d8c1 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml
@@ -150,44 +150,44 @@ additionalProperties: false
 
 examples:
   - |
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-        tlmm: pinctrl@500000 {
-                compatible = "qcom,sm6115-tlmm";
-                reg = <0x500000 0x400000>,
-                        <0x900000 0x400000>,
-                        <0xd00000 0x400000>;
-                reg-names = "west", "south", "east";
-                interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
-                gpio-controller;
-                #gpio-cells = <2>;
-                interrupt-controller;
-                #interrupt-cells = <2>;
-                gpio-ranges = <&tlmm 0 0 114>;
-
-                sdc2_on_state: sdc2-on-state {
-                        clk-pins {
-                                pins = "sdc2_clk";
-                                bias-disable;
-                                drive-strength = <16>;
-                        };
-
-                        cmd-pins {
-                                pins = "sdc2_cmd";
-                                bias-pull-up;
-                                drive-strength = <10>;
-                        };
-
-                        data-pins {
-                                pins = "sdc2_data";
-                                bias-pull-up;
-                                drive-strength = <10>;
-                        };
-
-                        sd-cd-pins {
-                                pins = "gpio88";
-                                function = "gpio";
-                                bias-pull-up;
-                                drive-strength = <2>;
-                        };
-                };
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@500000 {
+        compatible = "qcom,sm6115-tlmm";
+        reg = <0x500000 0x400000>,
+              <0x900000 0x400000>,
+              <0xd00000 0x400000>;
+        reg-names = "west", "south", "east";
+        interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 114>;
+
+        sdc2_on_state: sdc2-on-state {
+            clk-pins {
+                pins = "sdc2_clk";
+                bias-disable;
+                drive-strength = <16>;
+            };
+
+            cmd-pins {
+                pins = "sdc2_cmd";
+                bias-pull-up;
+                drive-strength = <10>;
+            };
+
+            data-pins {
+                pins = "sdc2_data";
+                bias-pull-up;
+                drive-strength = <10>;
+            };
+
+            sd-cd-pins {
+                pins = "gpio88";
+                function = "gpio";
+                bias-pull-up;
+                drive-strength = <2>;
+            };
         };
+    };
-- 
2.34.1

[PATCH v2 04/40] dt-bindings: pinctrl: qcom,sm6125-pinctrl: fix matching pin config

[Krzysztof Kozlowski]

Matching PMIC GPIOs config nodes within a '-state' node by '.*' pattern
does not work as expected because of linux,phandle in the DTB:

    'pins' is a required property
    'function' is a required property
    'rx', 'tx' do not match any of the regexes: 'pinctrl-[0-9]+'
    [[59]] is not of type 'object'

Make the schema stricter and expect such nodes to be followed with a
'-pins' suffix.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml       | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml
index c8eec845ade9..84ed16f9915d 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml
@@ -51,8 +51,9 @@ patternProperties:
     oneOf:
       - $ref: "#/$defs/qcom-sm6125-tlmm-state"
       - patternProperties:
-          ".*":
+          "-pins$":
             $ref: "#/$defs/qcom-sm6125-tlmm-state"
+        additionalProperties: false
 
 $defs:
   qcom-sm6125-tlmm-state:
-- 
2.34.1

[PATCH v2 05/40] dt-bindings: pinctrl: qcom,sm6125-pinctrl: do not require function on non-GPIOs

[Krzysztof Kozlowski]

Certain pins, like SDcard related, do not have functions and such should
not be required:

  sdc1-clk-pins: 'function' is a required property

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Another question is whether 'function' should be disallowed for such
pins?
---
 .../bindings/pinctrl/qcom,sm6125-pinctrl.yaml        | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml
index 84ed16f9915d..735eb5d6834d 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml
@@ -61,7 +61,6 @@ $defs:
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
 
     properties:
       pins:
@@ -112,7 +111,16 @@ $defs:
 
     required:
       - pins
-      - function
+
+    allOf:
+      - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+      - if:
+          properties:
+            pins:
+              pattern: "^gpio[0-9]|[1-9][0-9]|1[0-2][0-9]|13[0-2]$"
+        then:
+          required:
+            - function
 
     additionalProperties: false
 
-- 
2.34.1

[PATCH v2 06/40] dt-bindings: pinctrl: qcom,sm6125-pinctrl: extend example

[Krzysztof Kozlowski]

Extend example with children for pin configuration and indent it with
4-spaces.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/pinctrl/qcom,sm6125-pinctrl.yaml | 46 +++++++++++++------
 1 file changed, 33 insertions(+), 13 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml
index 735eb5d6834d..5cb8b272cb7d 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml
@@ -126,17 +126,37 @@ $defs:
 
 examples:
   - |
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-        pinctrl@500000 {
-                compatible = "qcom,sm6125-tlmm";
-                reg = <0x00500000 0x400000>,
-                    <0x00900000 0x400000>,
-                    <0x00d00000 0x400000>;
-                reg-names = "west", "south", "east";
-                interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
-                gpio-controller;
-                gpio-ranges = <&tlmm 0 0 134>;
-                #gpio-cells = <2>;
-                interrupt-controller;
-                #interrupt-cells = <2>;
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pinctrl@500000 {
+        compatible = "qcom,sm6125-tlmm";
+        reg = <0x00500000 0x400000>,
+              <0x00900000 0x400000>,
+              <0x00d00000 0x400000>;
+        reg-names = "west", "south", "east";
+        interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        gpio-ranges = <&tlmm 0 0 134>;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        sdc2-off-state {
+            clk-pins {
+                pins = "sdc2_clk";
+                drive-strength = <2>;
+                bias-disable;
+            };
+
+            cmd-pins {
+                pins = "sdc2_cmd";
+                drive-strength = <2>;
+                bias-pull-up;
+            };
+
+            data-pins {
+                pins = "sdc2_data";
+                drive-strength = <2>;
+                bias-pull-up;
+            };
         };
+    };
-- 
2.34.1

[PATCH v2 07/40] dt-bindings: pinctrl: qcom,sm6350-pinctrl: fix matching pin config

[Krzysztof Kozlowski]

Matching PMIC GPIOs config nodes within a '-state' node by '.*' pattern
does not work as expected because of linux,phandle in the DTB:

    'pins' is a required property
    'function' is a required property
    'rx', 'tx' do not match any of the regexes: 'pinctrl-[0-9]+'
    [[59]] is not of type 'object'

Make the schema stricter and expect such nodes to be followed with a
'-pins' suffix.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/pinctrl/qcom,sm6350-pinctrl.yaml   | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-pinctrl.yaml
index 898608671c4b..85a4ff5a5625 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-pinctrl.yaml
@@ -44,8 +44,9 @@ patternProperties:
     oneOf:
       - $ref: "#/$defs/qcom-sm6350-tlmm-state"
       - patternProperties:
-          ".*":
+          "-pins$":
             $ref: "#/$defs/qcom-sm6350-tlmm-state"
+        additionalProperties: false
 
 $defs:
   qcom-sm6350-tlmm-state:
@@ -133,13 +134,13 @@ examples:
                 };
 
                 uart-w-subnodes-state {
-                        rx {
+                        rx-pins {
                                 pins = "gpio25";
                                 function = "qup13_f2";
                                 bias-disable;
                         };
 
-                        tx {
+                        tx-pins {
                                 pins = "gpio26";
                                 function = "qup13_f2";
                                 bias-disable;
-- 
2.34.1

[PATCH v2 08/40] dt-bindings: pinctrl: qcom,sm6350-pinctrl: do not require function on non-GPIOs

[Krzysztof Kozlowski]

Certain pins, like SDcard related, do not have functions and such should
not be required:

  sdc1-clk-pins: 'function' is a required property

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Another question is whether 'function' should be disallowed for such
pins?
---
 .../bindings/pinctrl/qcom,sm6350-pinctrl.yaml        | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-pinctrl.yaml
index 85a4ff5a5625..0c4bf6e90ba0 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-pinctrl.yaml
@@ -54,7 +54,6 @@ $defs:
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
 
     properties:
       pins:
@@ -111,7 +110,16 @@ $defs:
 
     required:
       - pins
-      - function
+
+    allOf:
+      - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+      - if:
+          properties:
+            pins:
+              pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-7])$"
+        then:
+          required:
+            - function
 
     additionalProperties: false
 
-- 
2.34.1

[PATCH v2 09/40] dt-bindings: pinctrl: qcom,sm6350-pinctrl: fix indentation in example

[Krzysztof Kozlowski]

Bindings example should be indented with 4-spaces.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/pinctrl/qcom,sm6350-pinctrl.yaml | 58 +++++++++----------
 1 file changed, 29 insertions(+), 29 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-pinctrl.yaml
index 0c4bf6e90ba0..856b9c567ecb 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-pinctrl.yaml
@@ -125,34 +125,34 @@ $defs:
 
 examples:
   - |
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-        pinctrl@f100000 {
-                compatible = "qcom,sm6350-tlmm";
-                reg = <0x0f100000 0x300000>;
-                interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-                gpio-controller;
-                #gpio-cells = <2>;
-                interrupt-controller;
-                #interrupt-cells = <2>;
-                gpio-ranges = <&tlmm 0 0 157>;
-
-                gpio-wo-subnode-state {
-                        pins = "gpio1";
-                        function = "gpio";
-                };
-
-                uart-w-subnodes-state {
-                        rx-pins {
-                                pins = "gpio25";
-                                function = "qup13_f2";
-                                bias-disable;
-                        };
-
-                        tx-pins {
-                                pins = "gpio26";
-                                function = "qup13_f2";
-                                bias-disable;
-                        };
-                };
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pinctrl@f100000 {
+        compatible = "qcom,sm6350-tlmm";
+        reg = <0x0f100000 0x300000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 157>;
+
+        gpio-wo-subnode-state {
+            pins = "gpio1";
+            function = "gpio";
         };
+
+        uart-w-subnodes-state {
+            rx-pins {
+                pins = "gpio25";
+                function = "qup13_f2";
+                bias-disable;
+            };
+
+            tx-pins {
+                pins = "gpio26";
+                function = "qup13_f2";
+                bias-disable;
+            };
+        };
+    };
 ...
-- 
2.34.1

[PATCH v2 10/40] dt-bindings: pinctrl: qcom,sm6375-pinctrl: fix matching pin config

[Krzysztof Kozlowski]

Matching PMIC GPIOs config nodes within a '-state' node by '.*' pattern
does not work as expected because of linux,phandle in the DTB:

    'pins' is a required property
    'function' is a required property
    'rx', 'tx' do not match any of the regexes: 'pinctrl-[0-9]+'
    [[59]] is not of type 'object'

Make the schema stricter and expect such nodes to be followed with a
'-pins' suffix.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml      | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml
index 3908807a8339..50f0ca5ab7e7 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml
@@ -44,8 +44,9 @@ patternProperties:
     oneOf:
       - $ref: "#/$defs/qcom-sm6375-tlmm-state"
       - patternProperties:
-          ".*":
+          "-pins$":
             $ref: "#/$defs/qcom-sm6375-tlmm-state"
+        additionalProperties: false
 
 $defs:
   qcom-sm6375-tlmm-state:
@@ -142,13 +143,13 @@ examples:
                 };
 
                 uart-w-subnodes-state {
-                        rx {
+                        rx-pins {
                                 pins = "gpio18";
                                 function = "qup13_f2";
                                 bias-pull-up;
                         };
 
-                        tx {
+                        tx-pins {
                                 pins = "gpio19";
                                 function = "qup13_f2";
                                 bias-disable;
-- 
2.34.1

[PATCH v2 11/40] dt-bindings: pinctrl: qcom,sm6375-pinctrl: do not require function on non-GPIOs

[Krzysztof Kozlowski]

Certain pins, like SDcard related, do not have functions and such should
not be required:

  sdc1-clk-pins: 'function' is a required property

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Another question is whether 'function' should be disallowed for such
pins?
---
 .../bindings/pinctrl/qcom,sm6375-tlmm.yaml           | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml
index 50f0ca5ab7e7..dbd91d6b63b3 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml
@@ -54,7 +54,6 @@ $defs:
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
 
     properties:
       pins:
@@ -120,7 +119,16 @@ $defs:
 
     required:
       - pins
-      - function
+
+    allOf:
+      - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+      - if:
+          properties:
+            pins:
+              pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-6])$"
+        then:
+          required:
+            - function
 
     additionalProperties: false
 
-- 
2.34.1

[PATCH v2 12/40] dt-bindings: pinctrl: qcom,sm6375-pinctrl: fix indentation in example

[Krzysztof Kozlowski]

Bindings example should be indented with 4-spaces.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/pinctrl/qcom,sm6375-tlmm.yaml    | 58 +++++++++----------
 1 file changed, 29 insertions(+), 29 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml
index dbd91d6b63b3..025faf87d147 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml
@@ -134,34 +134,34 @@ $defs:
 
 examples:
   - |
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-        pinctrl@500000 {
-                compatible = "qcom,sm6375-tlmm";
-                reg = <0x00500000 0x800000>;
-                interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
-                gpio-controller;
-                #gpio-cells = <2>;
-                interrupt-controller;
-                #interrupt-cells = <2>;
-                gpio-ranges = <&tlmm 0 0 157>;
-
-                gpio-wo-subnode-state {
-                        pins = "gpio1";
-                        function = "gpio";
-                };
-
-                uart-w-subnodes-state {
-                        rx-pins {
-                                pins = "gpio18";
-                                function = "qup13_f2";
-                                bias-pull-up;
-                        };
-
-                        tx-pins {
-                                pins = "gpio19";
-                                function = "qup13_f2";
-                                bias-disable;
-                        };
-                };
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pinctrl@500000 {
+        compatible = "qcom,sm6375-tlmm";
+        reg = <0x00500000 0x800000>;
+        interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 157>;
+
+        gpio-wo-subnode-state {
+            pins = "gpio1";
+            function = "gpio";
         };
+
+        uart-w-subnodes-state {
+            rx-pins {
+                pins = "gpio18";
+                function = "qup13_f2";
+                bias-pull-up;
+            };
+
+            tx-pins {
+                pins = "gpio19";
+                function = "qup13_f2";
+                bias-disable;
+            };
+        };
+    };
 ...
-- 
2.34.1

[PATCH v2 13/40] dt-bindings: pinctrl: qcom,sm8250-pinctrl: do not require function on non-GPIOs

[Krzysztof Kozlowski]

Certain pins, like SDcard related, do not have functions and such should
not be required:

  sdc1-clk-pins: 'function' is a required property

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Another question is whether 'function' should be disallowed for such
pins?
---
 .../bindings/pinctrl/qcom,sm8250-pinctrl.yaml          | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
index 15bb1018cf21..12bdc2e67c4d 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
@@ -110,7 +110,15 @@ patternProperties:
 
       required:
         - pins
-        - function
+
+      allOf:
+        - if:
+            properties:
+              pins:
+                pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9])$"
+          then:
+            required:
+              - function
 
       additionalProperties: false
 
-- 
2.34.1

[PATCH v2 14/40] dt-bindings: pinctrl: qcom,sm8250-pinctrl: reference tlmm common pins

[Krzysztof Kozlowski]

Each subnode configuring pins (so the final -pins or pinconf) should
reference common TLMM pin definition.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml         | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
index 12bdc2e67c4d..bccc83f22aae 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
@@ -112,6 +112,7 @@ patternProperties:
         - pins
 
       allOf:
+        - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
         - if:
             properties:
               pins:
-- 
2.34.1

[PATCH v2 15/40] dt-bindings: pinctrl: qcom,sm8250-pinctrl: fix indentation in example

[Krzysztof Kozlowski]

Bindings example should be indented with 4-spaces.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/pinctrl/qcom,sm8250-pinctrl.yaml | 30 +++++++++----------
 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
index bccc83f22aae..c44d02d28bc9 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
@@ -141,18 +141,18 @@ additionalProperties: false
 
 examples:
   - |
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-        pinctrl@1f00000 {
-                compatible = "qcom,sm8250-pinctrl";
-                reg = <0x0f100000 0x300000>,
-                      <0x0f500000 0x300000>,
-                      <0x0f900000 0x300000>;
-                reg-names = "west", "south", "north";
-                interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-                gpio-controller;
-                #gpio-cells = <2>;
-                interrupt-controller;
-                #interrupt-cells = <2>;
-                gpio-ranges = <&tlmm 0 0 180>;
-                wakeup-parent = <&pdc>;
-        };
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pinctrl@1f00000 {
+            compatible = "qcom,sm8250-pinctrl";
+            reg = <0x0f100000 0x300000>,
+                  <0x0f500000 0x300000>,
+                  <0x0f900000 0x300000>;
+            reg-names = "west", "south", "north";
+            interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            gpio-ranges = <&tlmm 0 0 180>;
+            wakeup-parent = <&pdc>;
+    };
-- 
2.34.1

[PATCH v2 16/40] dt-bindings: pinctrl: qcom,sm8350-pinctrl: fix matching pin config

[Krzysztof Kozlowski]

Matching PMIC GPIOs config nodes within a '-state' node by '.*' pattern
does not work as expected because of linux,phandle in the DTB:

  sm8350-hdk.dtb: pinctrl@f100000: qup-uart3-default-state: 'oneOf' conditional failed, one must be fixed:
    'pins' is a required property
    'function' is a required property
    'rx', 'tx' do not match any of the regexes: 'pinctrl-[0-9]+'
    [[59]] is not of type 'object'

Make the schema stricter and expect such nodes to be followed with a
'-pins' suffix.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/pinctrl/qcom,sm8350-pinctrl.yaml   | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-pinctrl.yaml
index 6b7789db2f75..211cca11f94f 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-pinctrl.yaml
@@ -44,8 +44,9 @@ patternProperties:
     oneOf:
       - $ref: "#/$defs/qcom-sm8350-tlmm-state"
       - patternProperties:
-          ".*":
+          "-pins$":
             $ref: "#/$defs/qcom-sm8350-tlmm-state"
+        additionalProperties: false
 
 $defs:
   qcom-sm8350-tlmm-state:
@@ -130,13 +131,13 @@ examples:
                 };
 
                 uart-w-subnodes-state {
-                        rx {
+                        rx-pins {
                                 pins = "gpio18";
                                 function = "qup3";
                                 bias-pull-up;
                         };
 
-                        tx {
+                        tx-pins {
                                 pins = "gpio19";
                                 function = "qup3";
                                 bias-disable;
-- 
2.34.1

[PATCH v2 17/40] dt-bindings: pinctrl: qcom,sm8350-pinctrl: fix indentation in example

[Krzysztof Kozlowski]

Bindings example should be indented with 4-spaces.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/pinctrl/qcom,sm8350-pinctrl.yaml | 58 +++++++++----------
 1 file changed, 29 insertions(+), 29 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-pinctrl.yaml
index 211cca11f94f..f3106d25adcf 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-pinctrl.yaml
@@ -114,34 +114,34 @@ $defs:
 
 examples:
   - |
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-        pinctrl@f100000 {
-                compatible = "qcom,sm8350-tlmm";
-                reg = <0x0f100000 0x300000>;
-                interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-                gpio-controller;
-                #gpio-cells = <2>;
-                interrupt-controller;
-                #interrupt-cells = <2>;
-                gpio-ranges = <&tlmm 0 0 203>;
-
-                gpio-wo-subnode-state {
-                        pins = "gpio1";
-                        function = "gpio";
-                };
-
-                uart-w-subnodes-state {
-                        rx-pins {
-                                pins = "gpio18";
-                                function = "qup3";
-                                bias-pull-up;
-                        };
-
-                        tx-pins {
-                                pins = "gpio19";
-                                function = "qup3";
-                                bias-disable;
-                        };
-                };
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pinctrl@f100000 {
+        compatible = "qcom,sm8350-tlmm";
+        reg = <0x0f100000 0x300000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 203>;
+
+        gpio-wo-subnode-state {
+            pins = "gpio1";
+            function = "gpio";
         };
+
+        uart-w-subnodes-state {
+            rx-pins {
+                pins = "gpio18";
+                function = "qup3";
+                bias-pull-up;
+            };
+
+            tx-pins {
+                pins = "gpio19";
+                function = "qup3";
+                bias-disable;
+            };
+        };
+    };
 ...
-- 
2.34.1

[PATCH v2 18/40] dt-bindings: pinctrl: qcom,sm8350-pinctrl: do not require function on non-GPIOs

[Krzysztof Kozlowski]

Certain pins, like SDcard related, do not have functions and such should
not be required:

  sdc1-clk-pins: 'function' is a required property

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Another question is whether 'function' should be disallowed for such
pins?
---
 .../bindings/pinctrl/qcom,sm8350-pinctrl.yaml        | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-pinctrl.yaml
index f3106d25adcf..6ae5571f60da 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-pinctrl.yaml
@@ -54,7 +54,6 @@ $defs:
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
 
     properties:
       pins:
@@ -108,7 +107,16 @@ $defs:
 
     required:
       - pins
-      - function
+
+    allOf:
+      - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+      - if:
+          properties:
+            pins:
+              pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-3])$"
+        then:
+          required:
+            - function
 
     additionalProperties: false
 
-- 
2.34.1

[PATCH v2 19/40] dt-bindings: pinctrl: qcom,sm8450-pinctrl: fix matching pin config

[Krzysztof Kozlowski]

Matching PMIC GPIOs config nodes within a '-state' node by '.*' pattern
does not work as expected because of linux,phandle in the DTB:

  qcom/sm4250-oneplus-billie2.dtb: pinctrl@500000: sdc1-on-state: 'oneOf' conditional failed, one must be fixed:
    'pins' is a required property
    'clk', 'cmd', 'data', 'rclk' do not match any of the regexes: 'pinctrl-[0-9]+'
    [[26]] is not of type 'object'

Make the schema stricter and expect such nodes to be followed with a
'-pins' suffix.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/pinctrl/qcom,sm8450-pinctrl.yaml   | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-pinctrl.yaml
index 9c891246245b..d1d1c1455b3c 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-pinctrl.yaml
@@ -43,8 +43,9 @@ patternProperties:
     oneOf:
       - $ref: "#/$defs/qcom-sm8450-tlmm-state"
       - patternProperties:
-          ".*":
+          "-pins$":
             $ref: "#/$defs/qcom-sm8450-tlmm-state"
+        additionalProperties: false
 
 $defs:
   qcom-sm8450-tlmm-state:
@@ -127,13 +128,13 @@ examples:
                 };
 
                 uart-w-subnodes-state {
-                    rx {
+                    rx-pins {
                             pins = "gpio26";
                             function = "qup7";
                             bias-pull-up;
                     };
 
-                    tx {
+                    tx-pins {
                             pins = "gpio27";
                             function = "qup7";
                             bias-disable;
-- 
2.34.1

[PATCH v2 20/40] dt-bindings: pinctrl: qcom,sm8450-pinctrl: fix indentation in example

[Krzysztof Kozlowski]

Bindings example should be indented with 4-spaces.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/pinctrl/qcom,sm8450-pinctrl.yaml | 58 +++++++++----------
 1 file changed, 29 insertions(+), 29 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-pinctrl.yaml
index d1d1c1455b3c..87347e9c5f1c 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-pinctrl.yaml
@@ -111,34 +111,34 @@ $defs:
 
 examples:
   - |
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-        pinctrl@f100000 {
-                compatible = "qcom,sm8450-tlmm";
-                reg = <0x0f100000 0x300000>;
-                gpio-controller;
-                #gpio-cells = <2>;
-                gpio-ranges = <&tlmm 0 0 211>;
-                interrupt-controller;
-                #interrupt-cells = <2>;
-                interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-
-                gpio-wo-subnode-state {
-                        pins = "gpio1";
-                        function = "gpio";
-                };
-
-                uart-w-subnodes-state {
-                    rx-pins {
-                            pins = "gpio26";
-                            function = "qup7";
-                            bias-pull-up;
-                    };
-
-                    tx-pins {
-                            pins = "gpio27";
-                            function = "qup7";
-                            bias-disable;
-                    };
-               };
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pinctrl@f100000 {
+        compatible = "qcom,sm8450-tlmm";
+        reg = <0x0f100000 0x300000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 211>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+        gpio-wo-state {
+            pins = "gpio1";
+            function = "gpio";
         };
+
+        uart-w-state {
+            rx-pins {
+                pins = "gpio26";
+                function = "qup7";
+                bias-pull-up;
+            };
+
+            tx-pins {
+                pins = "gpio27";
+                function = "qup7";
+                bias-disable;
+            };
+        };
+    };
 ...
-- 
2.34.1

[PATCH v2 21/40] dt-bindings: pinctrl: qcom,sm8450-pinctrl: do not require function on non-GPIOs

[Krzysztof Kozlowski]

Certain pins, like SDcard related, do not have functions and such should
not be required:

  sdc1-clk-pins: 'function' is a required property

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Another question is whether 'function' should be disallowed for such
pins?
---
 .../bindings/pinctrl/qcom,sm8450-pinctrl.yaml        | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-pinctrl.yaml
index 87347e9c5f1c..296f503c1d97 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-pinctrl.yaml
@@ -53,7 +53,6 @@ $defs:
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
 
     properties:
       pins:
@@ -105,7 +104,16 @@ $defs:
 
     required:
       - pins
-      - function
+
+    allOf:
+      - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+      - if:
+          properties:
+            pins:
+              pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9])$"
+        then:
+          required:
+            - function
 
     additionalProperties: false
 
-- 
2.34.1

[PATCH v2 22/40] dt-bindings: pinctrl: qcom,sm8450-pinctrl: add gpio-line-names

[Krzysztof Kozlowski]

Add common gpio-line-names property and restrict gpio-reserved-ranges to
fixed size.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/pinctrl/qcom,sm8450-pinctrl.yaml | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-pinctrl.yaml
index 296f503c1d97..9cd97a467648 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-pinctrl.yaml
@@ -27,7 +27,14 @@ properties:
   interrupt-controller: true
   '#interrupt-cells': true
   gpio-controller: true
-  gpio-reserved-ranges: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 105
+
+  gpio-line-names:
+    maxItems: 209
+
   '#gpio-cells': true
   gpio-ranges: true
   wakeup-parent: true
-- 
2.34.1

[PATCH v2 23/40] dt-bindings: pinctrl: qcom,sc7280-pinctrl: correct number of GPIOs

[Krzysztof Kozlowski]

There are 182 GPIOs on SC7280.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml        | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml
index 2bd60c49a442..76de3b1eb8c7 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml
@@ -60,7 +60,7 @@ patternProperties:
           subnode.
         items:
           oneOf:
-            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-4])$"
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9]|18[0-2])$"
             - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk,
                       sdc2_cmd, sdc2_data, ufs_reset ]
         minItems: 1
-- 
2.34.1

[PATCH v2 24/40] dt-bindings: pinctrl: qcom,sc7280-pinctrl: do not require function on non-GPIOs

[Krzysztof Kozlowski]

Certain pins, like SDcard related, do not have functions and such should
not be required:

  sdc1-clk-pins: 'function' is a required property

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Another question is whether 'function' should be disallowed for such
pins?
---
 .../bindings/pinctrl/qcom,sc7280-pinctrl.yaml        | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml
index 76de3b1eb8c7..b12e738cabfa 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml
@@ -51,7 +51,6 @@ patternProperties:
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: "/schemas/pinctrl/pincfg-node.yaml"
 
     properties:
       pins:
@@ -118,7 +117,16 @@ patternProperties:
 
     required:
       - pins
-      - function
+
+    allOf:
+      - $ref: /schemas/pinctrl/pincfg-node.yaml
+      - if:
+          properties:
+            pins:
+              pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9]|18[0-2])$"
+        then:
+          required:
+            - function
 
     additionalProperties: false
 
-- 
2.34.1

[PATCH v2 25/40] dt-bindings: pinctrl: qcom,sc7280-pinctrl: add gpio-line-names

[Krzysztof Kozlowski]

Add common gpio-line-names property (used on SC7280 Herobrine boards).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml       | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml
index b12e738cabfa..463f2e95e237 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml
@@ -42,6 +42,9 @@ properties:
   gpio-ranges:
     maxItems: 1
 
+  gpio-line-names:
+    maxItems: 174
+
   wakeup-parent: true
 
 #PIN CONFIGURATION NODES
-- 
2.34.1

[PATCH v2 26/40] dt-bindings: pinctrl: qcom,sc7280-pinctrl: reference tlmm schema

[Krzysztof Kozlowski]

Qualcomm TLMM pin controller bindings should reference generic TLMM
schema (which also pulls generic pinctrl schema).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml        | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml
index 463f2e95e237..2ad79029d9b0 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml
@@ -134,7 +134,7 @@ patternProperties:
     additionalProperties: false
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 
 required:
   - compatible
-- 
2.34.1

[PATCH v2 27/40] dt-bindings: pinctrl: qcom,sc7280-pinctrl: fix indentation in example

[Krzysztof Kozlowski]

Bindings example should be indented with 4-spaces.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/pinctrl/qcom,sc7280-pinctrl.yaml | 36 +++++++++----------
 1 file changed, 18 insertions(+), 18 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml
index 2ad79029d9b0..ad3496784678 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml
@@ -150,22 +150,22 @@ additionalProperties: false
 
 examples:
   - |
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-        tlmm: pinctrl@f000000 {
-                compatible = "qcom,sc7280-pinctrl";
-                reg = <0xf000000 0x1000000>;
-                interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-                gpio-controller;
-                #gpio-cells = <2>;
-                interrupt-controller;
-                #interrupt-cells = <2>;
-                gpio-ranges = <&tlmm 0 0 175>;
-                wakeup-parent = <&pdc>;
-
-                qup_uart5_default: qup-uart5-pins {
-                        pins = "gpio46", "gpio47";
-                        function = "qup13";
-                        drive-strength = <2>;
-                        bias-disable;
-                };
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@f000000 {
+        compatible = "qcom,sc7280-pinctrl";
+        reg = <0xf000000 0x1000000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 175>;
+        wakeup-parent = <&pdc>;
+
+        qup_uart5_default: qup-uart5-pins {
+            pins = "gpio46", "gpio47";
+            function = "qup13";
+            drive-strength = <2>;
+            bias-disable;
         };
+    };
-- 
2.34.1

[PATCH v2 28/40] dt-bindings: pinctrl: qcom,sc8180x-pinctrl: fix matching pin config

[Krzysztof Kozlowski]

Matching PMIC GPIOs config nodes within a '-state' node by '.*' pattern
does not work as expected because of linux,phandle in the DTB:

    'pins' is a required property
    'function' is a required property
    'rx', 'tx' do not match any of the regexes: 'pinctrl-[0-9]+'
    [[59]] is not of type 'object'

Make the schema stricter and expect such nodes to be followed with a
'-pins' suffix.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/pinctrl/qcom,sc8180x-pinctrl.yaml  | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-pinctrl.yaml
index 86509172603d..646fabdf81f7 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-pinctrl.yaml
@@ -51,8 +51,9 @@ patternProperties:
     oneOf:
       - $ref: "#/$defs/qcom-sc8180x-tlmm-state"
       - patternProperties:
-          ".*":
+          "-pins$":
             $ref: "#/$defs/qcom-sc8180x-tlmm-state"
+        additionalProperties: false
 
 '$defs':
   qcom-sc8180x-tlmm-state:
@@ -137,13 +138,13 @@ examples:
                 };
 
                 uart-w-subnodes-state {
-                        rx {
+                        rx-pins {
                                 pins = "gpio4";
                                 function = "qup6";
                                 bias-pull-up;
                         };
 
-                        tx {
+                        tx-pins {
                                 pins = "gpio5";
                                 function = "qup6";
                                 bias-disable;
-- 
2.34.1

[PATCH v2 29/40] dt-bindings: pinctrl: qcom,sc8180x-pinctrl: do not require function on non-GPIOs

[Krzysztof Kozlowski]

Certain pins, like SDcard related, do not have functions and such should
not be required:

  sdc1-clk-pins: 'function' is a required property

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Another question is whether 'function' should be disallowed for such
pins?
---
 .../bindings/pinctrl/qcom,sc8180x-pinctrl.yaml       | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-pinctrl.yaml
index 646fabdf81f7..4afe20bac87c 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-pinctrl.yaml
@@ -61,7 +61,6 @@ patternProperties:
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
 
     properties:
       pins:
@@ -112,7 +111,16 @@ patternProperties:
 
     required:
       - pins
-      - function
+
+    allOf:
+      - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+      - if:
+          properties:
+            pins:
+              pattern: "^gpio([0-9]|[1-9][0-9]|1[0-8][0-9])$"
+        then:
+          required:
+            - function
 
     additionalProperties: false
 
-- 
2.34.1

[PATCH v2 30/40] dt-bindings: pinctrl: qcom,sc8180x-pinctrl: fix indentation in example

[Krzysztof Kozlowski]

Bindings example should be indented with 4-spaces.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../pinctrl/qcom,sc8180x-pinctrl.yaml         | 64 +++++++++----------
 1 file changed, 32 insertions(+), 32 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-pinctrl.yaml
index 4afe20bac87c..b98eeba2c530 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-pinctrl.yaml
@@ -126,37 +126,37 @@ patternProperties:
 
 examples:
   - |
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-        pinctrl@3100000 {
-                compatible = "qcom,sc8180x-tlmm";
-                reg = <0x03100000 0x300000>,
-                      <0x03500000 0x700000>,
-                      <0x03d00000 0x300000>;
-                reg-names = "west", "east", "south";
-                interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-                gpio-controller;
-                #gpio-cells = <2>;
-                interrupt-controller;
-                #interrupt-cells = <2>;
-                gpio-ranges = <&tlmm 0 0 190>;
-
-                gpio-wo-subnode-state {
-                        pins = "gpio1";
-                        function = "gpio";
-                };
-
-                uart-w-subnodes-state {
-                        rx-pins {
-                                pins = "gpio4";
-                                function = "qup6";
-                                bias-pull-up;
-                        };
-
-                        tx-pins {
-                                pins = "gpio5";
-                                function = "qup6";
-                                bias-disable;
-                        };
-                };
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pinctrl@3100000 {
+        compatible = "qcom,sc8180x-tlmm";
+        reg = <0x03100000 0x300000>,
+              <0x03500000 0x700000>,
+              <0x03d00000 0x300000>;
+        reg-names = "west", "east", "south";
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 190>;
+
+        gpio-wo-subnode-state {
+            pins = "gpio1";
+            function = "gpio";
         };
+
+        uart-w-subnodes-state {
+            rx-pins {
+                pins = "gpio4";
+                function = "qup6";
+                bias-pull-up;
+            };
+
+            tx-pins {
+                pins = "gpio5";
+                function = "qup6";
+                bias-disable;
+            };
+        };
+    };
 ...
-- 
2.34.1

[PATCH v2 31/40] dt-bindings: pinctrl: qcom,sc8280xp-pinctrl: fix matching pin config

[Krzysztof Kozlowski]

Matching PMIC GPIOs config nodes within a '-state' node by '.*' pattern
does not work as expected because of linux,phandle in the DTB:

    'pins' is a required property
    'function' is a required property
    'rx', 'tx' do not match any of the regexes: 'pinctrl-[0-9]+'
    [[59]] is not of type 'object'

Make the schema stricter and expect such nodes to be followed with a
'-pins' suffix.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/pinctrl/qcom,sc8280xp-pinctrl.yaml | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-pinctrl.yaml
index 87a381c9a19d..5147afc28721 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-pinctrl.yaml
@@ -43,8 +43,9 @@ patternProperties:
     oneOf:
       - $ref: "#/$defs/qcom-sc8280xp-tlmm-state"
       - patternProperties:
-          ".*":
+          "-pins$":
             $ref: "#/$defs/qcom-sc8280xp-tlmm-state"
+        additionalProperties: false
 
 '$defs':
   qcom-sc8280xp-tlmm-state:
@@ -135,13 +136,13 @@ examples:
                 };
 
                 uart-w-subnodes-state {
-                        rx {
+                        rx-pins {
                                 pins = "gpio4";
                                 function = "qup14";
                                 bias-pull-up;
                         };
 
-                        tx {
+                        tx-pins {
                                 pins = "gpio5";
                                 function = "qup14";
                                 bias-disable;
-- 
2.34.1

[PATCH v2 32/40] dt-bindings: pinctrl: qcom,sc8280xp-pinctrl: do not require function on non-GPIOs

[Krzysztof Kozlowski]

Certain pins, like SDcard related, do not have functions and such should
not be required:

  sdc1-clk-pins: 'function' is a required property

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Another question is whether 'function' should be disallowed for such
pins?
---
 .../bindings/pinctrl/qcom,sc8280xp-pinctrl.yaml      | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-pinctrl.yaml
index 5147afc28721..8610f2701388 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-pinctrl.yaml
@@ -53,7 +53,6 @@ patternProperties:
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
 
     properties:
       pins:
@@ -113,7 +112,16 @@ patternProperties:
 
     required:
       - pins
-      - function
+
+    allOf:
+      - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+      - if:
+          properties:
+            pins:
+              pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-1][0-9]|22[0-7])$"
+        then:
+          required:
+            - function
 
     additionalProperties: false
 
-- 
2.34.1

[PATCH v2 33/40] dt-bindings: pinctrl: qcom,sc8280xp-pinctrl: fix indentation in example

[Krzysztof Kozlowski]

Bindings example should be indented with 4-spaces.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../pinctrl/qcom,sc8280xp-pinctrl.yaml        | 58 +++++++++----------
 1 file changed, 29 insertions(+), 29 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-pinctrl.yaml
index 8610f2701388..b9ab130cd558 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-pinctrl.yaml
@@ -127,34 +127,34 @@ patternProperties:
 
 examples:
   - |
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-        pinctrl@f100000 {
-                compatible = "qcom,sc8280xp-tlmm";
-                reg = <0x0f100000 0x300000>;
-                interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-                gpio-controller;
-                #gpio-cells = <2>;
-                interrupt-controller;
-                #interrupt-cells = <2>;
-                gpio-ranges = <&tlmm 0 0 230>;
-
-                gpio-wo-subnode-state {
-                        pins = "gpio1";
-                        function = "gpio";
-                };
-
-                uart-w-subnodes-state {
-                        rx-pins {
-                                pins = "gpio4";
-                                function = "qup14";
-                                bias-pull-up;
-                        };
-
-                        tx-pins {
-                                pins = "gpio5";
-                                function = "qup14";
-                                bias-disable;
-                        };
-                };
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pinctrl@f100000 {
+        compatible = "qcom,sc8280xp-tlmm";
+        reg = <0x0f100000 0x300000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 230>;
+
+        gpio-wo-subnode-state {
+                pins = "gpio1";
+                function = "gpio";
         };
+
+        uart-w-subnodes-state {
+            rx-pins {
+                pins = "gpio4";
+                function = "qup14";
+                bias-pull-up;
+            };
+
+            tx-pins {
+                pins = "gpio5";
+                function = "qup14";
+                bias-disable;
+            };
+        };
+    };
 ...
-- 
2.34.1

[PATCH v2 34/40] arm64: dts: qcom: sm6125: align TLMM pin configuration with DT schema

[Krzysztof Kozlowski]

DT schema expects TLMM pin configuration nodes to be named with '-state'
suffix and their optional children with '-pins' suffix.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts  |  4 ++--
 arch/arm64/boot/dts/qcom/sm6125.dtsi                   | 10 +++++-----
 2 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
index 0aad2e94e757..6a8b88cc4385 100644
--- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
+++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
@@ -87,7 +87,7 @@ &hsusb_phy1 {
 };
 
 &sdc2_off_state {
-	sd-cd {
+	sd-cd-pins {
 		pins = "gpio98";
 		drive-strength = <2>;
 		bias-disable;
@@ -95,7 +95,7 @@ sd-cd {
 };
 
 &sdc2_on_state {
-	sd-cd {
+	sd-cd-pins {
 		pins = "gpio98";
 		drive-strength = <2>;
 		bias-pull-up;
diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
index 8c582a9e4ada..1fe3fa3ad877 100644
--- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -387,19 +387,19 @@ tlmm: pinctrl@500000 {
 			#interrupt-cells = <2>;
 
 			sdc2_off_state: sdc2-off-state {
-				clk {
+				clk-pins {
 					pins = "sdc2_clk";
 					drive-strength = <2>;
 					bias-disable;
 				};
 
-				cmd {
+				cmd-pins {
 					pins = "sdc2_cmd";
 					drive-strength = <2>;
 					bias-pull-up;
 				};
 
-				data {
+				data-pins {
 					pins = "sdc2_data";
 					drive-strength = <2>;
 					bias-pull-up;
@@ -413,13 +413,13 @@ clk {
 					bias-disable;
 				};
 
-				cmd {
+				cmd-pins-pins {
 					pins = "sdc2_cmd";
 					drive-strength = <10>;
 					bias-pull-up;
 				};
 
-				data {
+				data-pins {
 					pins = "sdc2_data";
 					drive-strength = <10>;
 					bias-pull-up;
-- 
2.34.1

Re: [PATCH v2 34/40] arm64: dts: qcom: sm6125: align TLMM pin configuration with DT schema

[Marijn Suijten]

On 2022-09-12 08:17:40, Krzysztof Kozlowski wrote:
> DT schema expects TLMM pin configuration nodes to be named with '-state'
> suffix and their optional children with '-pins' suffix.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  .../boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts  |  4 ++--
>  arch/arm64/boot/dts/qcom/sm6125.dtsi                   | 10 +++++-----
>  2 files changed, 7 insertions(+), 7 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
> index 0aad2e94e757..6a8b88cc4385 100644
> --- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
> +++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
> @@ -87,7 +87,7 @@ &hsusb_phy1 {
>  };
>  
>  &sdc2_off_state {
> -	sd-cd {
> +	sd-cd-pins {
>  		pins = "gpio98";
>  		drive-strength = <2>;
>  		bias-disable;
> @@ -95,7 +95,7 @@ sd-cd {
>  };
>  
>  &sdc2_on_state {
> -	sd-cd {
> +	sd-cd-pins {
>  		pins = "gpio98";
>  		drive-strength = <2>;
>  		bias-pull-up;
> diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
> index 8c582a9e4ada..1fe3fa3ad877 100644
> --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
> @@ -387,19 +387,19 @@ tlmm: pinctrl@500000 {
>  			#interrupt-cells = <2>;
>  
>  			sdc2_off_state: sdc2-off-state {
> -				clk {
> +				clk-pins {
>  					pins = "sdc2_clk";
>  					drive-strength = <2>;
>  					bias-disable;
>  				};
>  
> -				cmd {
> +				cmd-pins {
>  					pins = "sdc2_cmd";
>  					drive-strength = <2>;
>  					bias-pull-up;
>  				};
>  
> -				data {
> +				data-pins {
>  					pins = "sdc2_data";
>  					drive-strength = <2>;
>  					bias-pull-up;
> @@ -413,13 +413,13 @@ clk {
>  					bias-disable;
>  				};
>  
> -				cmd {
> +				cmd-pins-pins {

Is this double -pins-pins suffix intended?

- Marijn

>  					pins = "sdc2_cmd";
>  					drive-strength = <10>;
>  					bias-pull-up;
>  				};
>  
> -				data {
> +				data-pins {
>  					pins = "sdc2_data";
>  					drive-strength = <10>;
>  					bias-pull-up;
> -- 
> 2.34.1
> 

Re: [PATCH v2 34/40] arm64: dts: qcom: sm6125: align TLMM pin configuration with DT schema

[Krzysztof Kozlowski]

On 09/10/2022 13:46, Marijn Suijten wrote:
>> diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
>> index 8c582a9e4ada..1fe3fa3ad877 100644
>> --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
>> @@ -387,19 +387,19 @@ tlmm: pinctrl@500000 {
>>  			#interrupt-cells = <2>;
>>  
>>  			sdc2_off_state: sdc2-off-state {
>> -				clk {
>> +				clk-pins {
>>  					pins = "sdc2_clk";
>>  					drive-strength = <2>;
>>  					bias-disable;
>>  				};
>>  
>> -				cmd {
>> +				cmd-pins {
>>  					pins = "sdc2_cmd";
>>  					drive-strength = <2>;
>>  					bias-pull-up;
>>  				};
>>  
>> -				data {
>> +				data-pins {
>>  					pins = "sdc2_data";
>>  					drive-strength = <2>;
>>  					bias-pull-up;
>> @@ -413,13 +413,13 @@ clk {
>>  					bias-disable;
>>  				};
>>  
>> -				cmd {
>> +				cmd-pins-pins {
> 
> Is this double -pins-pins suffix intended?
> 

No, thanks for noticing it.

Best regards,
Krzysztof

Re: [PATCH v2 34/40] arm64: dts: qcom: sm6125: align TLMM pin configuration with DT schema

[Krzysztof Kozlowski]

On 10/10/2022 06:26, Krzysztof Kozlowski wrote:
> On 09/10/2022 13:46, Marijn Suijten wrote:
>>> diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
>>> index 8c582a9e4ada..1fe3fa3ad877 100644
>>> --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
>>> +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
>>> @@ -387,19 +387,19 @@ tlmm: pinctrl@500000 {
>>>  			#interrupt-cells = <2>;
>>>  
>>>  			sdc2_off_state: sdc2-off-state {
>>> -				clk {
>>> +				clk-pins {
>>>  					pins = "sdc2_clk";
>>>  					drive-strength = <2>;
>>>  					bias-disable;
>>>  				};
>>>  
>>> -				cmd {
>>> +				cmd-pins {
>>>  					pins = "sdc2_cmd";
>>>  					drive-strength = <2>;
>>>  					bias-pull-up;
>>>  				};
>>>  
>>> -				data {
>>> +				data-pins {
>>>  					pins = "sdc2_data";
>>>  					drive-strength = <2>;
>>>  					bias-pull-up;
>>> @@ -413,13 +413,13 @@ clk {
>>>  					bias-disable;
>>>  				};
>>>  
>>> -				cmd {
>>> +				cmd-pins-pins {
>>
>> Is this double -pins-pins suffix intended?
>>
> 
> No, thanks for noticing it.

Wait, you commented on patch which was already merged. Fix is here already:
https://lore.kernel.org/linux-devicetree/20220930192954.242546-11-krzysztof.kozlowski@linaro.org/

Best regards,
Krzysztof

Re: [PATCH v2 34/40] arm64: dts: qcom: sm6125: align TLMM pin configuration with DT schema

[Marijn Suijten]

On 2022-10-10 07:31:31, Krzysztof Kozlowski wrote:
> On 10/10/2022 06:26, Krzysztof Kozlowski wrote:
> > On 09/10/2022 13:46, Marijn Suijten wrote:
> >>> [..]
> >>> -				cmd {
> >>> +				cmd-pins-pins {
> >>
> >> Is this double -pins-pins suffix intended?
> >>
> > 
> > No, thanks for noticing it.
> 
> Wait, you commented on patch which was already merged. Fix is here already:
> https://lore.kernel.org/linux-devicetree/20220930192954.242546-11-krzysztof.kozlowski@linaro.org/

Correct, I came across this while working on another SoC on -next and
wasn't sure if this patch was pulled in through some staging branch, or
if you or I should send up a followup patch.  Seems you've already done
so, thanks!

- Marijn

[PATCH v2 35/40] arm64: dts: qcom: sm6350: align TLMM pin configuration with DT schema

[Krzysztof Kozlowski]

DT schema expects TLMM pin configuration nodes to be named with '-state'
suffix and their optional children with '-pins' suffix.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm6350.dtsi | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index d882c29d53aa..c39de7d3ace0 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -1314,49 +1314,49 @@ tlmm: pinctrl@f100000 {
 			#interrupt-cells = <2>;
 			gpio-ranges = <&tlmm 0 0 157>;
 
-			qup_uart9_default: qup-uart9-default {
+			qup_uart9_default: qup-uart9-default-state {
 				pins = "gpio25", "gpio26";
 				function = "qup13_f2";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			qup_i2c0_default: qup-i2c0-default {
+			qup_i2c0_default: qup-i2c0-default-state {
 				pins = "gpio0", "gpio1";
 				function = "qup00";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			qup_i2c2_default: qup-i2c2-default {
+			qup_i2c2_default: qup-i2c2-default-state {
 				pins = "gpio45", "gpio46";
 				function = "qup02";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			qup_i2c6_default: qup-i2c6-default {
+			qup_i2c6_default: qup-i2c6-default-state {
 				pins = "gpio13", "gpio14";
 				function = "qup10";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			qup_i2c7_default: qup-i2c7-default {
+			qup_i2c7_default: qup-i2c7-default-state {
 				pins = "gpio27", "gpio28";
 				function = "qup11";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			qup_i2c8_default: qup-i2c8-default {
+			qup_i2c8_default: qup-i2c8-default-state {
 				pins = "gpio19", "gpio20";
 				function = "qup12";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			qup_i2c10_default: qup-i2c10-default {
+			qup_i2c10_default: qup-i2c10-default-state {
 				pins = "gpio4", "gpio5";
 				function = "qup14";
 				drive-strength = <2>;
-- 
2.34.1

[PATCH v2 36/40] arm64: dts: qcom: sm8350-sagami: correct TS pin property

[Krzysztof Kozlowski]

The pin configuration is selected with "pins", not "pin" property.

Fixes: 1209e9246632 ("arm64: dts: qcom: sm8350-sagami: Enable and populate I2C/SPI nodes")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
index cb9bbd234b7b..b702ab1605bb 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
@@ -223,7 +223,7 @@ &tlmm {
 	gpio-reserved-ranges = <44 4>;
 
 	ts_int_default: ts-int-default {
-		pin = "gpio23";
+		pins = "gpio23";
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
-- 
2.34.1

[PATCH v2 37/40] arm64: dts: qcom: sm8350: align TLMM pin configuration with DT schema

[Krzysztof Kozlowski]

DT schema expects TLMM pin configuration nodes to be named with '-state'
suffix and their optional children with '-pins' suffix.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../dts/qcom/sm8350-sony-xperia-sagami.dtsi   |  2 +-
 arch/arm64/boot/dts/qcom/sm8350.dtsi          | 44 +++++++++----------
 2 files changed, 23 insertions(+), 23 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
index b702ab1605bb..b3c9952ac173 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
@@ -222,7 +222,7 @@ &spi14 {
 &tlmm {
 	gpio-reserved-ranges = <44 4>;
 
-	ts_int_default: ts-int-default {
+	ts_int_default: ts-int-default-state {
 		pins = "gpio23";
 		function = "gpio";
 		drive-strength = <2>;
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index e72a04411888..cd5503642a23 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -1762,150 +1762,150 @@ tlmm: pinctrl@f100000 {
 			wakeup-parent = <&pdc>;
 
 			qup_uart3_default_state: qup-uart3-default-state {
-				rx {
+				rx-pins {
 					pins = "gpio18";
 					function = "qup3";
 				};
-				tx {
+				tx-pins {
 					pins = "gpio19";
 					function = "qup3";
 				};
 			};
 
-			qup_uart6_default: qup-uart6-default {
+			qup_uart6_default: qup-uart6-default-state {
 				pins = "gpio30", "gpio31";
 				function = "qup6";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			qup_uart18_default: qup-uart18-default {
+			qup_uart18_default: qup-uart18-default-state {
 				pins = "gpio58", "gpio59";
 				function = "qup18";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			qup_i2c0_default: qup-i2c0-default {
+			qup_i2c0_default: qup-i2c0-default-state {
 				pins = "gpio4", "gpio5";
 				function = "qup0";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			qup_i2c1_default: qup-i2c1-default {
+			qup_i2c1_default: qup-i2c1-default-state {
 				pins = "gpio8", "gpio9";
 				function = "qup1";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			qup_i2c2_default: qup-i2c2-default {
+			qup_i2c2_default: qup-i2c2-default-state {
 				pins = "gpio12", "gpio13";
 				function = "qup2";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			qup_i2c4_default: qup-i2c4-default {
+			qup_i2c4_default: qup-i2c4-default-state {
 				pins = "gpio20", "gpio21";
 				function = "qup4";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			qup_i2c5_default: qup-i2c5-default {
+			qup_i2c5_default: qup-i2c5-default-state {
 				pins = "gpio24", "gpio25";
 				function = "qup5";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			qup_i2c6_default: qup-i2c6-default {
+			qup_i2c6_default: qup-i2c6-default-state {
 				pins = "gpio28", "gpio29";
 				function = "qup6";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			qup_i2c7_default: qup-i2c7-default {
+			qup_i2c7_default: qup-i2c7-default-state {
 				pins = "gpio32", "gpio33";
 				function = "qup7";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			qup_i2c8_default: qup-i2c8-default {
+			qup_i2c8_default: qup-i2c8-default-state {
 				pins = "gpio36", "gpio37";
 				function = "qup8";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			qup_i2c9_default: qup-i2c9-default {
+			qup_i2c9_default: qup-i2c9-default-state {
 				pins = "gpio40", "gpio41";
 				function = "qup9";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			qup_i2c10_default: qup-i2c10-default {
+			qup_i2c10_default: qup-i2c10-default-state {
 				pins = "gpio44", "gpio45";
 				function = "qup10";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			qup_i2c11_default: qup-i2c11-default {
+			qup_i2c11_default: qup-i2c11-default-state {
 				pins = "gpio48", "gpio49";
 				function = "qup11";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			qup_i2c12_default: qup-i2c12-default {
+			qup_i2c12_default: qup-i2c12-default-state {
 				pins = "gpio52", "gpio53";
 				function = "qup12";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			qup_i2c13_default: qup-i2c13-default {
+			qup_i2c13_default: qup-i2c13-default-state {
 				pins = "gpio0", "gpio1";
 				function = "qup13";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			qup_i2c14_default: qup-i2c14-default {
+			qup_i2c14_default: qup-i2c14-default-state {
 				pins = "gpio56", "gpio57";
 				function = "qup14";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			qup_i2c15_default: qup-i2c15-default {
+			qup_i2c15_default: qup-i2c15-default-state {
 				pins = "gpio60", "gpio61";
 				function = "qup15";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			qup_i2c16_default: qup-i2c16-default {
+			qup_i2c16_default: qup-i2c16-default-state {
 				pins = "gpio64", "gpio65";
 				function = "qup16";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			qup_i2c17_default: qup-i2c17-default {
+			qup_i2c17_default: qup-i2c17-default-state {
 				pins = "gpio72", "gpio73";
 				function = "qup17";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			qup_i2c19_default: qup-i2c19-default {
+			qup_i2c19_default: qup-i2c19-default-state {
 				pins = "gpio76", "gpio77";
 				function = "qup19";
 				drive-strength = <2>;
-- 
2.34.1

[PATCH v2 38/40] arm64: dts: qcom: sm8450: align TLMM pin configuration with DT schema

[Krzysztof Kozlowski]

DT schema expects TLMM pin configuration nodes to be named with '-state'
suffix and their optional children with '-pins' suffix.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../qcom/sm8450-sony-xperia-nagara-pdx223.dts |  12 +-
 arch/arm64/boot/dts/qcom/sm8450.dtsi          | 152 +++++++++---------
 2 files changed, 82 insertions(+), 82 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts
index 7fe582b92a61..d68765eb6d4f 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts
+++ b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts
@@ -572,27 +572,27 @@ &spi10 {
 &tlmm {
 	gpio-reserved-ranges = <28 4>;
 
-	sdc2_default_state: sdc2-default {
-		clk {
+	sdc2_default_state: sdc2-default-state {
+		clk-pins {
 			pins = "sdc2_clk";
 			drive-strength = <16>;
 			bias-disable;
 		};
 
-		cmd {
+		cmd-pins {
 			pins = "sdc2_cmd";
 			drive-strength = <16>;
 			bias-pull-up;
 		};
 
-		data {
+		data-pins {
 			pins = "sdc2_data";
 			drive-strength = <16>;
 			bias-pull-up;
 		};
 	};
 
-	ts_int_default: ts-int-default {
+	ts_int_default: ts-int-default-state {
 		pins = "gpio23";
 		function = "gpio";
 		drive-strength = <2>;
@@ -600,7 +600,7 @@ ts_int_default: ts-int-default {
 		input-enable;
 	};
 
-	sdc2_card_det_n: sd-card-det-n {
+	sdc2_card_det_n: sd-card-det-n-state {
 		pins = "gpio92";
 		function = "gpio";
 		drive-strength = <2>;
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index d0ebf61a0074..1d878256028f 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -2384,20 +2384,20 @@ tlmm: pinctrl@f100000 {
 			gpio-ranges = <&tlmm 0 0 211>;
 			wakeup-parent = <&pdc>;
 
-			sdc2_sleep_state: sdc2-sleep {
-				clk {
+			sdc2_sleep_state: sdc2-sleep-state {
+				clk-pins {
 					pins = "sdc2_clk";
 					drive-strength = <2>;
 					bias-disable;
 				};
 
-				cmd {
+				cmd-pins {
 					pins = "sdc2_cmd";
 					drive-strength = <2>;
 					bias-pull-up;
 				};
 
-				data {
+				data-pins {
 					pins = "sdc2_data";
 					drive-strength = <2>;
 					bias-pull-up;
@@ -2405,21 +2405,21 @@ data {
 			};
 
 			pcie0_default_state: pcie0-default-state {
-				perst {
+				perst-pins {
 					pins = "gpio94";
 					function = "gpio";
 					drive-strength = <2>;
 					bias-pull-down;
 				};
 
-				clkreq {
+				clkreq-pins {
 					pins = "gpio95";
 					function = "pcie0_clkreqn";
 					drive-strength = <2>;
 					bias-pull-up;
 				};
 
-				wake {
+				wake-pins {
 					pins = "gpio96";
 					function = "gpio";
 					drive-strength = <2>;
@@ -2428,21 +2428,21 @@ wake {
 			};
 
 			pcie1_default_state: pcie1-default-state {
-				perst {
+				perst-pins {
 					pins = "gpio97";
 					function = "gpio";
 					drive-strength = <2>;
 					bias-pull-down;
 				};
 
-				clkreq {
+				clkreq-pins {
 					pins = "gpio98";
 					function = "pcie1_clkreqn";
 					drive-strength = <2>;
 					bias-pull-up;
 				};
 
-				wake {
+				wake-pins {
 					pins = "gpio99";
 					function = "gpio";
 					drive-strength = <2>;
@@ -2450,350 +2450,350 @@ wake {
 				};
 			};
 
-			qup_i2c0_data_clk: qup-i2c0-data-clk {
+			qup_i2c0_data_clk: qup-i2c0-data-clk-state {
 				pins = "gpio0", "gpio1";
 				function = "qup0";
 			};
 
-			qup_i2c1_data_clk: qup-i2c1-data-clk {
+			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
 				pins = "gpio4", "gpio5";
 				function = "qup1";
 			};
 
-			qup_i2c2_data_clk: qup-i2c2-data-clk {
+			qup_i2c2_data_clk: qup-i2c2-data-clk-state {
 				pins = "gpio8", "gpio9";
 				function = "qup2";
 			};
 
-			qup_i2c3_data_clk: qup-i2c3-data-clk {
+			qup_i2c3_data_clk: qup-i2c3-data-clk-state {
 				pins = "gpio12", "gpio13";
 				function = "qup3";
 			};
 
-			qup_i2c4_data_clk: qup-i2c4-data-clk {
+			qup_i2c4_data_clk: qup-i2c4-data-clk-state {
 				pins = "gpio16", "gpio17";
 				function = "qup4";
 			};
 
-			qup_i2c5_data_clk: qup-i2c5-data-clk {
+			qup_i2c5_data_clk: qup-i2c5-data-clk-state {
 				pins = "gpio206", "gpio207";
 				function = "qup5";
 			};
 
-			qup_i2c6_data_clk: qup-i2c6-data-clk {
+			qup_i2c6_data_clk: qup-i2c6-data-clk-state {
 				pins = "gpio20", "gpio21";
 				function = "qup6";
 			};
 
-			qup_i2c8_data_clk: qup-i2c8-data-clk {
+			qup_i2c8_data_clk: qup-i2c8-data-clk-state {
 				pins = "gpio28", "gpio29";
 				function = "qup8";
 			};
 
-			qup_i2c9_data_clk: qup-i2c9-data-clk {
+			qup_i2c9_data_clk: qup-i2c9-data-clk-state {
 				pins = "gpio32", "gpio33";
 				function = "qup9";
 			};
 
-			qup_i2c10_data_clk: qup-i2c10-data-clk {
+			qup_i2c10_data_clk: qup-i2c10-data-clk-state {
 				pins = "gpio36", "gpio37";
 				function = "qup10";
 			};
 
-			qup_i2c11_data_clk: qup-i2c11-data-clk {
+			qup_i2c11_data_clk: qup-i2c11-data-clk-state {
 				pins = "gpio40", "gpio41";
 				function = "qup11";
 			};
 
-			qup_i2c12_data_clk: qup-i2c12-data-clk {
+			qup_i2c12_data_clk: qup-i2c12-data-clk-state {
 				pins = "gpio44", "gpio45";
 				function = "qup12";
 			};
 
-			qup_i2c13_data_clk: qup-i2c13-data-clk {
+			qup_i2c13_data_clk: qup-i2c13-data-clk-state {
 				pins = "gpio48", "gpio49";
 				function = "qup13";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			qup_i2c14_data_clk: qup-i2c14-data-clk {
+			qup_i2c14_data_clk: qup-i2c14-data-clk-state {
 				pins = "gpio52", "gpio53";
 				function = "qup14";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			qup_i2c15_data_clk: qup-i2c15-data-clk {
+			qup_i2c15_data_clk: qup-i2c15-data-clk-state {
 				pins = "gpio56", "gpio57";
 				function = "qup15";
 			};
 
-			qup_i2c16_data_clk: qup-i2c16-data-clk {
+			qup_i2c16_data_clk: qup-i2c16-data-clk-state {
 				pins = "gpio60", "gpio61";
 				function = "qup16";
 			};
 
-			qup_i2c17_data_clk: qup-i2c17-data-clk {
+			qup_i2c17_data_clk: qup-i2c17-data-clk-state {
 				pins = "gpio64", "gpio65";
 				function = "qup17";
 			};
 
-			qup_i2c18_data_clk: qup-i2c18-data-clk {
+			qup_i2c18_data_clk: qup-i2c18-data-clk-state {
 				pins = "gpio68", "gpio69";
 				function = "qup18";
 			};
 
-			qup_i2c19_data_clk: qup-i2c19-data-clk {
+			qup_i2c19_data_clk: qup-i2c19-data-clk-state {
 				pins = "gpio72", "gpio73";
 				function = "qup19";
 			};
 
-			qup_i2c20_data_clk: qup-i2c20-data-clk {
+			qup_i2c20_data_clk: qup-i2c20-data-clk-state {
 				pins = "gpio76", "gpio77";
 				function = "qup20";
 			};
 
-			qup_i2c21_data_clk: qup-i2c21-data-clk {
+			qup_i2c21_data_clk: qup-i2c21-data-clk-state {
 				pins = "gpio80", "gpio81";
 				function = "qup21";
 			};
 
-			qup_spi0_cs: qup-spi0-cs {
+			qup_spi0_cs: qup-spi0-cs-state {
 				pins = "gpio3";
 				function = "qup0";
 			};
 
-			qup_spi0_data_clk: qup-spi0-data-clk {
+			qup_spi0_data_clk: qup-spi0-data-clk-state {
 				pins = "gpio0", "gpio1", "gpio2";
 				function = "qup0";
 			};
 
-			qup_spi1_cs: qup-spi1-cs {
+			qup_spi1_cs: qup-spi1-cs-state {
 				pins = "gpio7";
 				function = "qup1";
 			};
 
-			qup_spi1_data_clk: qup-spi1-data-clk {
+			qup_spi1_data_clk: qup-spi1-data-clk-state {
 				pins = "gpio4", "gpio5", "gpio6";
 				function = "qup1";
 			};
 
-			qup_spi2_cs: qup-spi2-cs {
+			qup_spi2_cs: qup-spi2-cs-state {
 				pins = "gpio11";
 				function = "qup2";
 			};
 
-			qup_spi2_data_clk: qup-spi2-data-clk {
+			qup_spi2_data_clk: qup-spi2-data-clk-state {
 				pins = "gpio8", "gpio9", "gpio10";
 				function = "qup2";
 			};
 
-			qup_spi3_cs: qup-spi3-cs {
+			qup_spi3_cs: qup-spi3-cs-state {
 				pins = "gpio15";
 				function = "qup3";
 			};
 
-			qup_spi3_data_clk: qup-spi3-data-clk {
+			qup_spi3_data_clk: qup-spi3-data-clk-state {
 				pins = "gpio12", "gpio13", "gpio14";
 				function = "qup3";
 			};
 
-			qup_spi4_cs: qup-spi4-cs {
+			qup_spi4_cs: qup-spi4-cs-state {
 				pins = "gpio19";
 				function = "qup4";
 				drive-strength = <6>;
 				bias-disable;
 			};
 
-			qup_spi4_data_clk: qup-spi4-data-clk {
+			qup_spi4_data_clk: qup-spi4-data-clk-state {
 				pins = "gpio16", "gpio17", "gpio18";
 				function = "qup4";
 			};
 
-			qup_spi5_cs: qup-spi5-cs {
+			qup_spi5_cs: qup-spi5-cs-state {
 				pins = "gpio85";
 				function = "qup5";
 			};
 
-			qup_spi5_data_clk: qup-spi5-data-clk {
+			qup_spi5_data_clk: qup-spi5-data-clk-state {
 				pins = "gpio206", "gpio207", "gpio84";
 				function = "qup5";
 			};
 
-			qup_spi6_cs: qup-spi6-cs {
+			qup_spi6_cs: qup-spi6-cs-state {
 				pins = "gpio23";
 				function = "qup6";
 			};
 
-			qup_spi6_data_clk: qup-spi6-data-clk {
+			qup_spi6_data_clk: qup-spi6-data-clk-state {
 				pins = "gpio20", "gpio21", "gpio22";
 				function = "qup6";
 			};
 
-			qup_spi8_cs: qup-spi8-cs {
+			qup_spi8_cs: qup-spi8-cs-state {
 				pins = "gpio31";
 				function = "qup8";
 			};
 
-			qup_spi8_data_clk: qup-spi8-data-clk {
+			qup_spi8_data_clk: qup-spi8-data-clk-state {
 				pins = "gpio28", "gpio29", "gpio30";
 				function = "qup8";
 			};
 
-			qup_spi9_cs: qup-spi9-cs {
+			qup_spi9_cs: qup-spi9-cs-state {
 				pins = "gpio35";
 				function = "qup9";
 			};
 
-			qup_spi9_data_clk: qup-spi9-data-clk {
+			qup_spi9_data_clk: qup-spi9-data-clk-state {
 				pins = "gpio32", "gpio33", "gpio34";
 				function = "qup9";
 			};
 
-			qup_spi10_cs: qup-spi10-cs {
+			qup_spi10_cs: qup-spi10-cs-state {
 				pins = "gpio39";
 				function = "qup10";
 			};
 
-			qup_spi10_data_clk: qup-spi10-data-clk {
+			qup_spi10_data_clk: qup-spi10-data-clk-state {
 				pins = "gpio36", "gpio37", "gpio38";
 				function = "qup10";
 			};
 
-			qup_spi11_cs: qup-spi11-cs {
+			qup_spi11_cs: qup-spi11-cs-state {
 				pins = "gpio43";
 				function = "qup11";
 			};
 
-			qup_spi11_data_clk: qup-spi11-data-clk {
+			qup_spi11_data_clk: qup-spi11-data-clk-state {
 				pins = "gpio40", "gpio41", "gpio42";
 				function = "qup11";
 			};
 
-			qup_spi12_cs: qup-spi12-cs {
+			qup_spi12_cs: qup-spi12-cs-state {
 				pins = "gpio47";
 				function = "qup12";
 			};
 
-			qup_spi12_data_clk: qup-spi12-data-clk {
+			qup_spi12_data_clk: qup-spi12-data-clk-state {
 				pins = "gpio44", "gpio45", "gpio46";
 				function = "qup12";
 			};
 
-			qup_spi13_cs: qup-spi13-cs {
+			qup_spi13_cs: qup-spi13-cs-state {
 				pins = "gpio51";
 				function = "qup13";
 			};
 
-			qup_spi13_data_clk: qup-spi13-data-clk {
+			qup_spi13_data_clk: qup-spi13-data-clk-state {
 				pins = "gpio48", "gpio49", "gpio50";
 				function = "qup13";
 			};
 
-			qup_spi14_cs: qup-spi14-cs {
+			qup_spi14_cs: qup-spi14-cs-state {
 				pins = "gpio55";
 				function = "qup14";
 			};
 
-			qup_spi14_data_clk: qup-spi14-data-clk {
+			qup_spi14_data_clk: qup-spi14-data-clk-state {
 				pins = "gpio52", "gpio53", "gpio54";
 				function = "qup14";
 			};
 
-			qup_spi15_cs: qup-spi15-cs {
+			qup_spi15_cs: qup-spi15-cs-state {
 				pins = "gpio59";
 				function = "qup15";
 			};
 
-			qup_spi15_data_clk: qup-spi15-data-clk {
+			qup_spi15_data_clk: qup-spi15-data-clk-state {
 				pins = "gpio56", "gpio57", "gpio58";
 				function = "qup15";
 			};
 
-			qup_spi16_cs: qup-spi16-cs {
+			qup_spi16_cs: qup-spi16-cs-state {
 				pins = "gpio63";
 				function = "qup16";
 			};
 
-			qup_spi16_data_clk: qup-spi16-data-clk {
+			qup_spi16_data_clk: qup-spi16-data-clk-state {
 				pins = "gpio60", "gpio61", "gpio62";
 				function = "qup16";
 			};
 
-			qup_spi17_cs: qup-spi17-cs {
+			qup_spi17_cs: qup-spi17-cs-state {
 				pins = "gpio67";
 				function = "qup17";
 			};
 
-			qup_spi17_data_clk: qup-spi17-data-clk {
+			qup_spi17_data_clk: qup-spi17-data-clk-state {
 				pins = "gpio64", "gpio65", "gpio66";
 				function = "qup17";
 			};
 
-			qup_spi18_cs: qup-spi18-cs {
+			qup_spi18_cs: qup-spi18-cs-state {
 				pins = "gpio71";
 				function = "qup18";
 				drive-strength = <6>;
 				bias-disable;
 			};
 
-			qup_spi18_data_clk: qup-spi18-data-clk {
+			qup_spi18_data_clk: qup-spi18-data-clk-state {
 				pins = "gpio68", "gpio69", "gpio70";
 				function = "qup18";
 				drive-strength = <6>;
 				bias-disable;
 			};
 
-			qup_spi19_cs: qup-spi19-cs {
+			qup_spi19_cs: qup-spi19-cs-state {
 				pins = "gpio75";
 				function = "qup19";
 				drive-strength = <6>;
 				bias-disable;
 			};
 
-			qup_spi19_data_clk: qup-spi19-data-clk {
+			qup_spi19_data_clk: qup-spi19-data-clk-state {
 				pins = "gpio72", "gpio73", "gpio74";
 				function = "qup19";
 				drive-strength = <6>;
 				bias-disable;
 			};
 
-			qup_spi20_cs: qup-spi20-cs {
+			qup_spi20_cs: qup-spi20-cs-state {
 				pins = "gpio79";
 				function = "qup20";
 			};
 
-			qup_spi20_data_clk: qup-spi20-data-clk {
+			qup_spi20_data_clk: qup-spi20-data-clk-state {
 				pins = "gpio76", "gpio77", "gpio78";
 				function = "qup20";
 			};
 
-			qup_spi21_cs: qup-spi21-cs {
+			qup_spi21_cs: qup-spi21-cs-state {
 				pins = "gpio83";
 				function = "qup21";
 			};
 
-			qup_spi21_data_clk: qup-spi21-data-clk {
+			qup_spi21_data_clk: qup-spi21-data-clk-state {
 				pins = "gpio80", "gpio81", "gpio82";
 				function = "qup21";
 			};
 
-			qup_uart7_rx: qup-uart7-rx {
+			qup_uart7_rx: qup-uart7-rx-state {
 				pins = "gpio26";
 				function = "qup7";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			qup_uart7_tx: qup-uart7-tx {
+			qup_uart7_tx: qup-uart7-tx-state {
 				pins = "gpio27";
 				function = "qup7";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			qup_uart20_default: qup-uart20-default {
+			qup_uart20_default: qup-uart20-default-state {
 				pins = "gpio76", "gpio77", "gpio78", "gpio79";
 				function = "qup20";
 			};
-- 
2.34.1

[PATCH v2 39/40] arm64: dts: qcom: sc7280: align TLMM pin configuration with DT schema

[Krzysztof Kozlowski]

DT schema expects TLMM pin configuration nodes to be named with '-state'
suffix and their optional children with '-pins' suffix.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../arm64/boot/dts/qcom/sc7280-herobrine.dtsi |  44 +--
 .../arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi |   8 +-
 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi      |  20 +-
 arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi    |  14 +-
 arch/arm64/boot/dts/qcom/sc7280.dtsi          | 316 +++++++++---------
 5 files changed, 201 insertions(+), 201 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
index 45f6a1e1002e..82307722222a 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
@@ -717,27 +717,27 @@ &tlmm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&bios_flash_wp_od>;
 
-	amp_en: amp-en {
+	amp_en: amp-en-pins {
 		pins = "gpio63";
 		function = "gpio";
 		bias-disable;
 		drive-strength = <2>;
 	};
 
-	ap_ec_int_l: ap-ec-int-l {
+	ap_ec_int_l: ap-ec-int-l-pins {
 		pins = "gpio18";
 		function = "gpio";
 		bias-pull-up;
 	};
 
-	bios_flash_wp_od: bios-flash-wp-od {
+	bios_flash_wp_od: bios-flash-wp-od-pins {
 		pins = "gpio16";
 		function = "gpio";
 		/* Has external pull */
 		bias-disable;
 	};
 
-	en_fp_rails: en-fp-rails {
+	en_fp_rails: en-fp-rails-pins {
 		pins = "gpio77";
 		function = "gpio";
 		bias-disable;
@@ -745,60 +745,60 @@ en_fp_rails: en-fp-rails {
 		output-high;
 	};
 
-	en_pp3300_codec: en-pp3300-codec {
+	en_pp3300_codec: en-pp3300-codec-pins {
 		pins = "gpio105";
 		function = "gpio";
 		bias-disable;
 		drive-strength = <2>;
 	};
 
-	en_pp3300_dx_edp: en-pp3300-dx-edp {
+	en_pp3300_dx_edp: en-pp3300-dx-edp-pins {
 		pins = "gpio80";
 		function = "gpio";
 		bias-disable;
 		drive-strength = <2>;
 	};
 
-	fp_rst_l: fp-rst-l {
+	fp_rst_l: fp-rst-l-pins {
 		pins = "gpio78";
 		function = "gpio";
 		bias-disable;
 		drive-strength = <2>;
 	};
 
-	fp_to_ap_irq_l: fp-to-ap-irq-l {
+	fp_to_ap_irq_l: fp-to-ap-irq-l-pins {
 		pins = "gpio61";
 		function = "gpio";
 		/* Has external pullup */
 		bias-disable;
 	};
 
-	fpmcu_boot0: fpmcu-boot0 {
+	fpmcu_boot0: fpmcu-boot0-pins {
 		pins = "gpio68";
 		function = "gpio";
 		bias-disable;
 	};
 
-	gsc_ap_int_odl: gsc-ap-int-odl {
+	gsc_ap_int_odl: gsc-ap-int-odl-pins {
 		pins = "gpio104";
 		function = "gpio";
 		bias-pull-up;
 	};
 
-	hp_irq: hp-irq {
+	hp_irq: hp-irq-pins {
 		pins = "gpio101";
 		function = "gpio";
 		bias-pull-up;
 	};
 
-	hub_en: hub-en {
+	hub_en: hub-en-pins {
 		pins = "gpio157";
 		function = "gpio";
 		bias-disable;
 		drive-strength = <2>;
 	};
 
-	pe_wake_odl: pe-wake-odl {
+	pe_wake_odl: pe-wake-odl-pins {
 		pins = "gpio3";
 		function = "gpio";
 		/* Has external pull */
@@ -807,45 +807,45 @@ pe_wake_odl: pe-wake-odl {
 	};
 
 	/* For ap_spi_fp */
-	qup_spi9_cs_gpio_init_high: qup-spi9-cs-gpio-init-high {
+	qup_spi9_cs_gpio_init_high: qup-spi9-cs-gpio-init-high-pins {
 		pins = "gpio39";
 		function = "gpio";
 		output-high;
 	};
 
 	/* For ap_ec_spi */
-	qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high {
+	qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high-pins {
 		pins = "gpio43";
 		function = "gpio";
 		output-high;
 	};
 
-	sar0_irq_odl: sar0-irq-odl {
+	sar0_irq_odl: sar0-irq-odl-pins {
 		pins = "gpio141";
 		function = "gpio";
 		bias-pull-up;
 	};
 
-	sar1_irq_odl: sar1-irq-odl {
+	sar1_irq_odl: sar1-irq-odl-pins {
 		pins = "gpio140";
 		function = "gpio";
 		bias-pull-up;
 	};
 
-	sd_cd_odl: sd-cd-odl {
+	sd_cd_odl: sd-cd-odl-pins {
 		pins = "gpio91";
 		function = "gpio";
 		bias-pull-up;
 	};
 
-	ssd_en: ssd-en {
+	ssd_en: ssd-en-pins {
 		pins = "gpio51";
 		function = "gpio";
 		bias-disable;
 		drive-strength = <2>;
 	};
 
-	ssd_rst_l: ssd-rst-l {
+	ssd_rst_l: ssd-rst-l-pins {
 		pins = "gpio2";
 		function = "gpio";
 		bias-disable;
@@ -853,14 +853,14 @@ ssd_rst_l: ssd-rst-l {
 		output-low;
 	};
 
-	tp_int_odl: tp-int-odl {
+	tp_int_odl: tp-int-odl-pins {
 		pins = "gpio7";
 		function = "gpio";
 		/* Has external pullup */
 		bias-disable;
 	};
 
-	wf_cam_en: wf-cam-en {
+	wf_cam_en: wf-cam-en-pins {
 		pins = "gpio119";
 		function = "gpio";
 		/* Has external pulldown */
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi
index a7c346aa3b02..7f5143e9bb80 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi
@@ -79,26 +79,26 @@ cr50: tpm@0 {
 };
 
 &tlmm {
-	ap_ec_int_l: ap-ec-int-l {
+	ap_ec_int_l: ap-ec-int-l-pins {
 		pins = "gpio18";
 		function = "gpio";
 		input-enable;
 		bias-pull-up;
 	};
 
-	h1_ap_int_odl: h1-ap-int-odl {
+	h1_ap_int_odl: h1-ap-int-odl-pins {
 		pins = "gpio104";
 		function = "gpio";
 		input-enable;
 		bias-pull-up;
 	};
 
-	qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high {
+	qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high-pins {
 		pins = "gpio43";
 		output-high;
 	};
 
-	qup_spi14_cs_gpio_init_high: qup-spi14-cs-gpio-init-high {
+	qup_spi14_cs_gpio_init_high: qup-spi14-cs-gpio-init-high-pins {
 		pins = "gpio59";
 		output-high;
 	};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index 0c48db69e1ef..89ecf0d25a12 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -550,18 +550,18 @@ &sdc2_data {
 };
 
 &tlmm {
-	bt_en: bt-en {
+	bt_en: bt-en-pins {
 		pins = "gpio85";
 		function = "gpio";
 		output-low;
 		bias-disable;
 	};
 
-	nvme_pwren: nvme-pwren {
+	nvme_pwren: nvme-pwren-pins {
 		function = "gpio";
 	};
 
-	pcie1_reset_n: pcie1-reset-n {
+	pcie1_reset_n: pcie1-reset-n-pins {
 		pins = "gpio2";
 		function = "gpio";
 
@@ -570,7 +570,7 @@ pcie1_reset_n: pcie1-reset-n {
 		bias-disable;
 	};
 
-	pcie1_wake_n: pcie1-wake-n {
+	pcie1_wake_n: pcie1-wake-n-pins {
 		pins = "gpio3";
 		function = "gpio";
 
@@ -578,7 +578,7 @@ pcie1_wake_n: pcie1-wake-n {
 		bias-pull-up;
 	};
 
-	qup_uart7_sleep_cts: qup-uart7-sleep-cts {
+	qup_uart7_sleep_cts: qup-uart7-sleep-cts-pins {
 		pins = "gpio28";
 		function = "gpio";
 		/*
@@ -591,7 +591,7 @@ qup_uart7_sleep_cts: qup-uart7-sleep-cts {
 		bias-bus-hold;
 	};
 
-	qup_uart7_sleep_rts: qup-uart7-sleep-rts {
+	qup_uart7_sleep_rts: qup-uart7-sleep-rts-pins {
 		pins = "gpio29";
 		function = "gpio";
 		/*
@@ -603,7 +603,7 @@ qup_uart7_sleep_rts: qup-uart7-sleep-rts {
 		bias-pull-down;
 	};
 
-	qup_uart7_sleep_tx: qup-uart7-sleep-tx {
+	qup_uart7_sleep_tx: qup-uart7-sleep-tx-pins {
 		pins = "gpio30";
 		function = "gpio";
 		/*
@@ -613,7 +613,7 @@ qup_uart7_sleep_tx: qup-uart7-sleep-tx {
 		bias-pull-up;
 	};
 
-	qup_uart7_sleep_rx: qup-uart7-sleep-rx {
+	qup_uart7_sleep_rx: qup-uart7-sleep-rx-pins {
 		pins = "gpio31";
 		function = "gpio";
 		/*
@@ -624,13 +624,13 @@ qup_uart7_sleep_rx: qup-uart7-sleep-rx {
 		bias-pull-up;
 	};
 
-	sd_cd: sd-cd {
+	sd_cd: sd-cd-pins {
 		pins = "gpio91";
 		function = "gpio";
 		bias-pull-up;
 	};
 
-	sw_ctrl: sw-ctrl {
+	sw_ctrl: sw-ctrl-pins {
 		pins = "gpio86";
 		function = "gpio";
 		bias-pull-down;
diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
index 7cd91df7a118..0b56aecf857b 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
@@ -542,7 +542,7 @@ pmic_edp_bl_pwm: pmic-edp-bl-pwm-state {
 };
 
 &tlmm {
-	mos_bt_en: mos-bt-en {
+	mos_bt_en: mos-bt-en-pins {
 		pins = "gpio85";
 		function = "gpio";
 		drive-strength = <2>;
@@ -550,7 +550,7 @@ mos_bt_en: mos-bt-en {
 	};
 
 	/* For mos_bt_uart */
-	qup_uart7_sleep_cts: qup-uart7-sleep-cts {
+	qup_uart7_sleep_cts: qup-uart7-sleep-cts-pins {
 		pins = "gpio28";
 		function = "gpio";
 		/*
@@ -564,7 +564,7 @@ qup_uart7_sleep_cts: qup-uart7-sleep-cts {
 	};
 
 	/* For mos_bt_uart */
-	qup_uart7_sleep_rts: qup-uart7-sleep-rts {
+	qup_uart7_sleep_rts: qup-uart7-sleep-rts-pins {
 		pins = "gpio29";
 		function = "gpio";
 		/*
@@ -577,7 +577,7 @@ qup_uart7_sleep_rts: qup-uart7-sleep-rts {
 	};
 
 	/* For mos_bt_uart */
-	qup_uart7_sleep_rx: qup-uart7-sleep-rx {
+	qup_uart7_sleep_rx: qup-uart7-sleep-rx-pins {
 		pins = "gpio31";
 		function = "gpio";
 		/*
@@ -589,7 +589,7 @@ qup_uart7_sleep_rx: qup-uart7-sleep-rx {
 	};
 
 	/* For mos_bt_uart */
-	qup_uart7_sleep_tx: qup-uart7-sleep-tx {
+	qup_uart7_sleep_tx: qup-uart7-sleep-tx-pins {
 		pins = "gpio30";
 		function = "gpio";
 		/*
@@ -599,13 +599,13 @@ qup_uart7_sleep_tx: qup-uart7-sleep-tx {
 		bias-pull-up;
 	};
 
-	ts_int_conn: ts-int-conn {
+	ts_int_conn: ts-int-conn-pins {
 		pins = "gpio55";
 		function = "gpio";
 		bias-pull-up;
 	};
 
-	ts_rst_conn: ts-rst-conn {
+	ts_rst_conn: ts-rst-conn-pins {
 		pins = "gpio54";
 		function = "gpio";
 		drive-strength = <2>;
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index ad04025a8a1a..07fa3e417a96 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -4061,791 +4061,791 @@ tlmm: pinctrl@f100000 {
 			gpio-ranges = <&tlmm 0 0 175>;
 			wakeup-parent = <&pdc>;
 
-			dp_hot_plug_det: dp-hot-plug-det {
+			dp_hot_plug_det: dp-hot-plug-det-pins {
 				pins = "gpio47";
 				function = "dp_hot";
 			};
 
-			edp_hot_plug_det: edp-hot-plug-det {
+			edp_hot_plug_det: edp-hot-plug-det-pins {
 				pins = "gpio60";
 				function = "edp_hot";
 			};
 
-			mi2s0_data0: mi2s0-data0 {
+			mi2s0_data0: mi2s0-data0-pins {
 				pins = "gpio98";
 				function = "mi2s0_data0";
 			};
 
-			mi2s0_data1: mi2s0-data1 {
+			mi2s0_data1: mi2s0-data1-pins {
 				pins = "gpio99";
 				function = "mi2s0_data1";
 			};
 
-			mi2s0_mclk: mi2s0-mclk {
+			mi2s0_mclk: mi2s0-mclk-pins {
 				pins = "gpio96";
 				function = "pri_mi2s";
 			};
 
-			mi2s0_sclk: mi2s0-sclk {
+			mi2s0_sclk: mi2s0-sclk-pins {
 				pins = "gpio97";
 				function = "mi2s0_sck";
 			};
 
-			mi2s0_ws: mi2s0-ws {
+			mi2s0_ws: mi2s0-ws-pins {
 				pins = "gpio100";
 				function = "mi2s0_ws";
 			};
 
-			mi2s1_data0: mi2s1-data0 {
+			mi2s1_data0: mi2s1-data0-pins {
 				pins = "gpio107";
 				function = "mi2s1_data0";
 			};
 
-			mi2s1_sclk: mi2s1-sclk {
+			mi2s1_sclk: mi2s1-sclk-pins {
 				pins = "gpio106";
 				function = "mi2s1_sck";
 			};
 
-			mi2s1_ws: mi2s1-ws {
+			mi2s1_ws: mi2s1-ws-pins {
 				pins = "gpio108";
 				function = "mi2s1_ws";
 			};
 
-			pcie1_clkreq_n: pcie1-clkreq-n {
+			pcie1_clkreq_n: pcie1-clkreq-n-pins {
 				pins = "gpio79";
 				function = "pcie1_clkreqn";
 			};
 
-			qspi_clk: qspi-clk {
+			qspi_clk: qspi-clk-pins {
 				pins = "gpio14";
 				function = "qspi_clk";
 			};
 
-			qspi_cs0: qspi-cs0 {
+			qspi_cs0: qspi-cs0-pins {
 				pins = "gpio15";
 				function = "qspi_cs";
 			};
 
-			qspi_cs1: qspi-cs1 {
+			qspi_cs1: qspi-cs1-pins {
 				pins = "gpio19";
 				function = "qspi_cs";
 			};
 
-			qspi_data01: qspi-data01 {
+			qspi_data01: qspi-data01-pins {
 				pins = "gpio12", "gpio13";
 				function = "qspi_data";
 			};
 
-			qspi_data12: qspi-data12 {
+			qspi_data12: qspi-data12-pins {
 				pins = "gpio16", "gpio17";
 				function = "qspi_data";
 			};
 
-			qup_i2c0_data_clk: qup-i2c0-data-clk {
+			qup_i2c0_data_clk: qup-i2c0-data-clk-pins {
 				pins = "gpio0", "gpio1";
 				function = "qup00";
 			};
 
-			qup_i2c1_data_clk: qup-i2c1-data-clk {
+			qup_i2c1_data_clk: qup-i2c1-data-clk-pins {
 				pins = "gpio4", "gpio5";
 				function = "qup01";
 			};
 
-			qup_i2c2_data_clk: qup-i2c2-data-clk {
+			qup_i2c2_data_clk: qup-i2c2-data-clk-pins {
 				pins = "gpio8", "gpio9";
 				function = "qup02";
 			};
 
-			qup_i2c3_data_clk: qup-i2c3-data-clk {
+			qup_i2c3_data_clk: qup-i2c3-data-clk-pins {
 				pins = "gpio12", "gpio13";
 				function = "qup03";
 			};
 
-			qup_i2c4_data_clk: qup-i2c4-data-clk {
+			qup_i2c4_data_clk: qup-i2c4-data-clk-pins {
 				pins = "gpio16", "gpio17";
 				function = "qup04";
 			};
 
-			qup_i2c5_data_clk: qup-i2c5-data-clk {
+			qup_i2c5_data_clk: qup-i2c5-data-clk-pins {
 				pins = "gpio20", "gpio21";
 				function = "qup05";
 			};
 
-			qup_i2c6_data_clk: qup-i2c6-data-clk {
+			qup_i2c6_data_clk: qup-i2c6-data-clk-pins {
 				pins = "gpio24", "gpio25";
 				function = "qup06";
 			};
 
-			qup_i2c7_data_clk: qup-i2c7-data-clk {
+			qup_i2c7_data_clk: qup-i2c7-data-clk-pins {
 				pins = "gpio28", "gpio29";
 				function = "qup07";
 			};
 
-			qup_i2c8_data_clk: qup-i2c8-data-clk {
+			qup_i2c8_data_clk: qup-i2c8-data-clk-pins {
 				pins = "gpio32", "gpio33";
 				function = "qup10";
 			};
 
-			qup_i2c9_data_clk: qup-i2c9-data-clk {
+			qup_i2c9_data_clk: qup-i2c9-data-clk-pins {
 				pins = "gpio36", "gpio37";
 				function = "qup11";
 			};
 
-			qup_i2c10_data_clk: qup-i2c10-data-clk {
+			qup_i2c10_data_clk: qup-i2c10-data-clk-pins {
 				pins = "gpio40", "gpio41";
 				function = "qup12";
 			};
 
-			qup_i2c11_data_clk: qup-i2c11-data-clk {
+			qup_i2c11_data_clk: qup-i2c11-data-clk-pins {
 				pins = "gpio44", "gpio45";
 				function = "qup13";
 			};
 
-			qup_i2c12_data_clk: qup-i2c12-data-clk {
+			qup_i2c12_data_clk: qup-i2c12-data-clk-pins {
 				pins = "gpio48", "gpio49";
 				function = "qup14";
 			};
 
-			qup_i2c13_data_clk: qup-i2c13-data-clk {
+			qup_i2c13_data_clk: qup-i2c13-data-clk-pins {
 				pins = "gpio52", "gpio53";
 				function = "qup15";
 			};
 
-			qup_i2c14_data_clk: qup-i2c14-data-clk {
+			qup_i2c14_data_clk: qup-i2c14-data-clk-pins {
 				pins = "gpio56", "gpio57";
 				function = "qup16";
 			};
 
-			qup_i2c15_data_clk: qup-i2c15-data-clk {
+			qup_i2c15_data_clk: qup-i2c15-data-clk-pins {
 				pins = "gpio60", "gpio61";
 				function = "qup17";
 			};
 
-			qup_spi0_data_clk: qup-spi0-data-clk {
+			qup_spi0_data_clk: qup-spi0-data-clk-pins {
 				pins = "gpio0", "gpio1", "gpio2";
 				function = "qup00";
 			};
 
-			qup_spi0_cs: qup-spi0-cs {
+			qup_spi0_cs: qup-spi0-cs-pins {
 				pins = "gpio3";
 				function = "qup00";
 			};
 
-			qup_spi0_cs_gpio: qup-spi0-cs-gpio {
+			qup_spi0_cs_gpio: qup-spi0-cs-gpio-pins {
 				pins = "gpio3";
 				function = "gpio";
 			};
 
-			qup_spi1_data_clk: qup-spi1-data-clk {
+			qup_spi1_data_clk: qup-spi1-data-clk-pins {
 				pins = "gpio4", "gpio5", "gpio6";
 				function = "qup01";
 			};
 
-			qup_spi1_cs: qup-spi1-cs {
+			qup_spi1_cs: qup-spi1-cs-pins {
 				pins = "gpio7";
 				function = "qup01";
 			};
 
-			qup_spi1_cs_gpio: qup-spi1-cs-gpio {
+			qup_spi1_cs_gpio: qup-spi1-cs-gpio-pins {
 				pins = "gpio7";
 				function = "gpio";
 			};
 
-			qup_spi2_data_clk: qup-spi2-data-clk {
+			qup_spi2_data_clk: qup-spi2-data-clk-pins {
 				pins = "gpio8", "gpio9", "gpio10";
 				function = "qup02";
 			};
 
-			qup_spi2_cs: qup-spi2-cs {
+			qup_spi2_cs: qup-spi2-cs-pins {
 				pins = "gpio11";
 				function = "qup02";
 			};
 
-			qup_spi2_cs_gpio: qup-spi2-cs-gpio {
+			qup_spi2_cs_gpio: qup-spi2-cs-gpio-pins {
 				pins = "gpio11";
 				function = "gpio";
 			};
 
-			qup_spi3_data_clk: qup-spi3-data-clk {
+			qup_spi3_data_clk: qup-spi3-data-clk-pins {
 				pins = "gpio12", "gpio13", "gpio14";
 				function = "qup03";
 			};
 
-			qup_spi3_cs: qup-spi3-cs {
+			qup_spi3_cs: qup-spi3-cs-pins {
 				pins = "gpio15";
 				function = "qup03";
 			};
 
-			qup_spi3_cs_gpio: qup-spi3-cs-gpio {
+			qup_spi3_cs_gpio: qup-spi3-cs-gpio-pins {
 				pins = "gpio15";
 				function = "gpio";
 			};
 
-			qup_spi4_data_clk: qup-spi4-data-clk {
+			qup_spi4_data_clk: qup-spi4-data-clk-pins {
 				pins = "gpio16", "gpio17", "gpio18";
 				function = "qup04";
 			};
 
-			qup_spi4_cs: qup-spi4-cs {
+			qup_spi4_cs: qup-spi4-cs-pins {
 				pins = "gpio19";
 				function = "qup04";
 			};
 
-			qup_spi4_cs_gpio: qup-spi4-cs-gpio {
+			qup_spi4_cs_gpio: qup-spi4-cs-gpio-pins {
 				pins = "gpio19";
 				function = "gpio";
 			};
 
-			qup_spi5_data_clk: qup-spi5-data-clk {
+			qup_spi5_data_clk: qup-spi5-data-clk-pins {
 				pins = "gpio20", "gpio21", "gpio22";
 				function = "qup05";
 			};
 
-			qup_spi5_cs: qup-spi5-cs {
+			qup_spi5_cs: qup-spi5-cs-pins {
 				pins = "gpio23";
 				function = "qup05";
 			};
 
-			qup_spi5_cs_gpio: qup-spi5-cs-gpio {
+			qup_spi5_cs_gpio: qup-spi5-cs-gpio-pins {
 				pins = "gpio23";
 				function = "gpio";
 			};
 
-			qup_spi6_data_clk: qup-spi6-data-clk {
+			qup_spi6_data_clk: qup-spi6-data-clk-pins {
 				pins = "gpio24", "gpio25", "gpio26";
 				function = "qup06";
 			};
 
-			qup_spi6_cs: qup-spi6-cs {
+			qup_spi6_cs: qup-spi6-cs-pins {
 				pins = "gpio27";
 				function = "qup06";
 			};
 
-			qup_spi6_cs_gpio: qup-spi6-cs-gpio {
+			qup_spi6_cs_gpio: qup-spi6-cs-gpio-pins {
 				pins = "gpio27";
 				function = "gpio";
 			};
 
-			qup_spi7_data_clk: qup-spi7-data-clk {
+			qup_spi7_data_clk: qup-spi7-data-clk-pins {
 				pins = "gpio28", "gpio29", "gpio30";
 				function = "qup07";
 			};
 
-			qup_spi7_cs: qup-spi7-cs {
+			qup_spi7_cs: qup-spi7-cs-pins {
 				pins = "gpio31";
 				function = "qup07";
 			};
 
-			qup_spi7_cs_gpio: qup-spi7-cs-gpio {
+			qup_spi7_cs_gpio: qup-spi7-cs-gpio-pins {
 				pins = "gpio31";
 				function = "gpio";
 			};
 
-			qup_spi8_data_clk: qup-spi8-data-clk {
+			qup_spi8_data_clk: qup-spi8-data-clk-pins {
 				pins = "gpio32", "gpio33", "gpio34";
 				function = "qup10";
 			};
 
-			qup_spi8_cs: qup-spi8-cs {
+			qup_spi8_cs: qup-spi8-cs-pins {
 				pins = "gpio35";
 				function = "qup10";
 			};
 
-			qup_spi8_cs_gpio: qup-spi8-cs-gpio {
+			qup_spi8_cs_gpio: qup-spi8-cs-gpio-pins {
 				pins = "gpio35";
 				function = "gpio";
 			};
 
-			qup_spi9_data_clk: qup-spi9-data-clk {
+			qup_spi9_data_clk: qup-spi9-data-clk-pins {
 				pins = "gpio36", "gpio37", "gpio38";
 				function = "qup11";
 			};
 
-			qup_spi9_cs: qup-spi9-cs {
+			qup_spi9_cs: qup-spi9-cs-pins {
 				pins = "gpio39";
 				function = "qup11";
 			};
 
-			qup_spi9_cs_gpio: qup-spi9-cs-gpio {
+			qup_spi9_cs_gpio: qup-spi9-cs-gpio-pins {
 				pins = "gpio39";
 				function = "gpio";
 			};
 
-			qup_spi10_data_clk: qup-spi10-data-clk {
+			qup_spi10_data_clk: qup-spi10-data-clk-pins {
 				pins = "gpio40", "gpio41", "gpio42";
 				function = "qup12";
 			};
 
-			qup_spi10_cs: qup-spi10-cs {
+			qup_spi10_cs: qup-spi10-cs-pins {
 				pins = "gpio43";
 				function = "qup12";
 			};
 
-			qup_spi10_cs_gpio: qup-spi10-cs-gpio {
+			qup_spi10_cs_gpio: qup-spi10-cs-gpio-pins {
 				pins = "gpio43";
 				function = "gpio";
 			};
 
-			qup_spi11_data_clk: qup-spi11-data-clk {
+			qup_spi11_data_clk: qup-spi11-data-clk-pins {
 				pins = "gpio44", "gpio45", "gpio46";
 				function = "qup13";
 			};
 
-			qup_spi11_cs: qup-spi11-cs {
+			qup_spi11_cs: qup-spi11-cs-pins {
 				pins = "gpio47";
 				function = "qup13";
 			};
 
-			qup_spi11_cs_gpio: qup-spi11-cs-gpio {
+			qup_spi11_cs_gpio: qup-spi11-cs-gpio-pins {
 				pins = "gpio47";
 				function = "gpio";
 			};
 
-			qup_spi12_data_clk: qup-spi12-data-clk {
+			qup_spi12_data_clk: qup-spi12-data-clk-pins {
 				pins = "gpio48", "gpio49", "gpio50";
 				function = "qup14";
 			};
 
-			qup_spi12_cs: qup-spi12-cs {
+			qup_spi12_cs: qup-spi12-cs-pins {
 				pins = "gpio51";
 				function = "qup14";
 			};
 
-			qup_spi12_cs_gpio: qup-spi12-cs-gpio {
+			qup_spi12_cs_gpio: qup-spi12-cs-gpio-pins {
 				pins = "gpio51";
 				function = "gpio";
 			};
 
-			qup_spi13_data_clk: qup-spi13-data-clk {
+			qup_spi13_data_clk: qup-spi13-data-clk-pins {
 				pins = "gpio52", "gpio53", "gpio54";
 				function = "qup15";
 			};
 
-			qup_spi13_cs: qup-spi13-cs {
+			qup_spi13_cs: qup-spi13-cs-pins {
 				pins = "gpio55";
 				function = "qup15";
 			};
 
-			qup_spi13_cs_gpio: qup-spi13-cs-gpio {
+			qup_spi13_cs_gpio: qup-spi13-cs-gpio-pins {
 				pins = "gpio55";
 				function = "gpio";
 			};
 
-			qup_spi14_data_clk: qup-spi14-data-clk {
+			qup_spi14_data_clk: qup-spi14-data-clk-pins {
 				pins = "gpio56", "gpio57", "gpio58";
 				function = "qup16";
 			};
 
-			qup_spi14_cs: qup-spi14-cs {
+			qup_spi14_cs: qup-spi14-cs-pins {
 				pins = "gpio59";
 				function = "qup16";
 			};
 
-			qup_spi14_cs_gpio: qup-spi14-cs-gpio {
+			qup_spi14_cs_gpio: qup-spi14-cs-gpio-pins {
 				pins = "gpio59";
 				function = "gpio";
 			};
 
-			qup_spi15_data_clk: qup-spi15-data-clk {
+			qup_spi15_data_clk: qup-spi15-data-clk-pins {
 				pins = "gpio60", "gpio61", "gpio62";
 				function = "qup17";
 			};
 
-			qup_spi15_cs: qup-spi15-cs {
+			qup_spi15_cs: qup-spi15-cs-pins {
 				pins = "gpio63";
 				function = "qup17";
 			};
 
-			qup_spi15_cs_gpio: qup-spi15-cs-gpio {
+			qup_spi15_cs_gpio: qup-spi15-cs-gpio-pins {
 				pins = "gpio63";
 				function = "gpio";
 			};
 
-			qup_uart0_cts: qup-uart0-cts {
+			qup_uart0_cts: qup-uart0-cts-pins {
 				pins = "gpio0";
 				function = "qup00";
 			};
 
-			qup_uart0_rts: qup-uart0-rts {
+			qup_uart0_rts: qup-uart0-rts-pins {
 				pins = "gpio1";
 				function = "qup00";
 			};
 
-			qup_uart0_tx: qup-uart0-tx {
+			qup_uart0_tx: qup-uart0-tx-pins {
 				pins = "gpio2";
 				function = "qup00";
 			};
 
-			qup_uart0_rx: qup-uart0-rx {
+			qup_uart0_rx: qup-uart0-rx-pins {
 				pins = "gpio3";
 				function = "qup00";
 			};
 
-			qup_uart1_cts: qup-uart1-cts {
+			qup_uart1_cts: qup-uart1-cts-pins {
 				pins = "gpio4";
 				function = "qup01";
 			};
 
-			qup_uart1_rts: qup-uart1-rts {
+			qup_uart1_rts: qup-uart1-rts-pins {
 				pins = "gpio5";
 				function = "qup01";
 			};
 
-			qup_uart1_tx: qup-uart1-tx {
+			qup_uart1_tx: qup-uart1-tx-pins {
 				pins = "gpio6";
 				function = "qup01";
 			};
 
-			qup_uart1_rx: qup-uart1-rx {
+			qup_uart1_rx: qup-uart1-rx-pins {
 				pins = "gpio7";
 				function = "qup01";
 			};
 
-			qup_uart2_cts: qup-uart2-cts {
+			qup_uart2_cts: qup-uart2-cts-pins {
 				pins = "gpio8";
 				function = "qup02";
 			};
 
-			qup_uart2_rts: qup-uart2-rts {
+			qup_uart2_rts: qup-uart2-rts-pins {
 				pins = "gpio9";
 				function = "qup02";
 			};
 
-			qup_uart2_tx: qup-uart2-tx {
+			qup_uart2_tx: qup-uart2-tx-pins {
 				pins = "gpio10";
 				function = "qup02";
 			};
 
-			qup_uart2_rx: qup-uart2-rx {
+			qup_uart2_rx: qup-uart2-rx-pins {
 				pins = "gpio11";
 				function = "qup02";
 			};
 
-			qup_uart3_cts: qup-uart3-cts {
+			qup_uart3_cts: qup-uart3-cts-pins {
 				pins = "gpio12";
 				function = "qup03";
 			};
 
-			qup_uart3_rts: qup-uart3-rts {
+			qup_uart3_rts: qup-uart3-rts-pins {
 				pins = "gpio13";
 				function = "qup03";
 			};
 
-			qup_uart3_tx: qup-uart3-tx {
+			qup_uart3_tx: qup-uart3-tx-pins {
 				pins = "gpio14";
 				function = "qup03";
 			};
 
-			qup_uart3_rx: qup-uart3-rx {
+			qup_uart3_rx: qup-uart3-rx-pins {
 				pins = "gpio15";
 				function = "qup03";
 			};
 
-			qup_uart4_cts: qup-uart4-cts {
+			qup_uart4_cts: qup-uart4-cts-pins {
 				pins = "gpio16";
 				function = "qup04";
 			};
 
-			qup_uart4_rts: qup-uart4-rts {
+			qup_uart4_rts: qup-uart4-rts-pins {
 				pins = "gpio17";
 				function = "qup04";
 			};
 
-			qup_uart4_tx: qup-uart4-tx {
+			qup_uart4_tx: qup-uart4-tx-pins {
 				pins = "gpio18";
 				function = "qup04";
 			};
 
-			qup_uart4_rx: qup-uart4-rx {
+			qup_uart4_rx: qup-uart4-rx-pins {
 				pins = "gpio19";
 				function = "qup04";
 			};
 
-			qup_uart5_cts: qup-uart5-cts {
+			qup_uart5_cts: qup-uart5-cts-pins {
 				pins = "gpio20";
 				function = "qup05";
 			};
 
-			qup_uart5_rts: qup-uart5-rts {
+			qup_uart5_rts: qup-uart5-rts-pins {
 				pins = "gpio21";
 				function = "qup05";
 			};
 
-			qup_uart5_tx: qup-uart5-tx {
+			qup_uart5_tx: qup-uart5-tx-pins {
 				pins = "gpio22";
 				function = "qup05";
 			};
 
-			qup_uart5_rx: qup-uart5-rx {
+			qup_uart5_rx: qup-uart5-rx-pins {
 				pins = "gpio23";
 				function = "qup05";
 			};
 
-			qup_uart6_cts: qup-uart6-cts {
+			qup_uart6_cts: qup-uart6-cts-pins {
 				pins = "gpio24";
 				function = "qup06";
 			};
 
-			qup_uart6_rts: qup-uart6-rts {
+			qup_uart6_rts: qup-uart6-rts-pins {
 				pins = "gpio25";
 				function = "qup06";
 			};
 
-			qup_uart6_tx: qup-uart6-tx {
+			qup_uart6_tx: qup-uart6-tx-pins {
 				pins = "gpio26";
 				function = "qup06";
 			};
 
-			qup_uart6_rx: qup-uart6-rx {
+			qup_uart6_rx: qup-uart6-rx-pins {
 				pins = "gpio27";
 				function = "qup06";
 			};
 
-			qup_uart7_cts: qup-uart7-cts {
+			qup_uart7_cts: qup-uart7-cts-pins {
 				pins = "gpio28";
 				function = "qup07";
 			};
 
-			qup_uart7_rts: qup-uart7-rts {
+			qup_uart7_rts: qup-uart7-rts-pins {
 				pins = "gpio29";
 				function = "qup07";
 			};
 
-			qup_uart7_tx: qup-uart7-tx {
+			qup_uart7_tx: qup-uart7-tx-pins {
 				pins = "gpio30";
 				function = "qup07";
 			};
 
-			qup_uart7_rx: qup-uart7-rx {
+			qup_uart7_rx: qup-uart7-rx-pins {
 				pins = "gpio31";
 				function = "qup07";
 			};
 
-			qup_uart8_cts: qup-uart8-cts {
+			qup_uart8_cts: qup-uart8-cts-pins {
 				pins = "gpio32";
 				function = "qup10";
 			};
 
-			qup_uart8_rts: qup-uart8-rts {
+			qup_uart8_rts: qup-uart8-rts-pins {
 				pins = "gpio33";
 				function = "qup10";
 			};
 
-			qup_uart8_tx: qup-uart8-tx {
+			qup_uart8_tx: qup-uart8-tx-pins {
 				pins = "gpio34";
 				function = "qup10";
 			};
 
-			qup_uart8_rx: qup-uart8-rx {
+			qup_uart8_rx: qup-uart8-rx-pins {
 				pins = "gpio35";
 				function = "qup10";
 			};
 
-			qup_uart9_cts: qup-uart9-cts {
+			qup_uart9_cts: qup-uart9-cts-pins {
 				pins = "gpio36";
 				function = "qup11";
 			};
 
-			qup_uart9_rts: qup-uart9-rts {
+			qup_uart9_rts: qup-uart9-rts-pins {
 				pins = "gpio37";
 				function = "qup11";
 			};
 
-			qup_uart9_tx: qup-uart9-tx {
+			qup_uart9_tx: qup-uart9-tx-pins {
 				pins = "gpio38";
 				function = "qup11";
 			};
 
-			qup_uart9_rx: qup-uart9-rx {
+			qup_uart9_rx: qup-uart9-rx-pins {
 				pins = "gpio39";
 				function = "qup11";
 			};
 
-			qup_uart10_cts: qup-uart10-cts {
+			qup_uart10_cts: qup-uart10-cts-pins {
 				pins = "gpio40";
 				function = "qup12";
 			};
 
-			qup_uart10_rts: qup-uart10-rts {
+			qup_uart10_rts: qup-uart10-rts-pins {
 				pins = "gpio41";
 				function = "qup12";
 			};
 
-			qup_uart10_tx: qup-uart10-tx {
+			qup_uart10_tx: qup-uart10-tx-pins {
 				pins = "gpio42";
 				function = "qup12";
 			};
 
-			qup_uart10_rx: qup-uart10-rx {
+			qup_uart10_rx: qup-uart10-rx-pins {
 				pins = "gpio43";
 				function = "qup12";
 			};
 
-			qup_uart11_cts: qup-uart11-cts {
+			qup_uart11_cts: qup-uart11-cts-pins {
 				pins = "gpio44";
 				function = "qup13";
 			};
 
-			qup_uart11_rts: qup-uart11-rts {
+			qup_uart11_rts: qup-uart11-rts-pins {
 				pins = "gpio45";
 				function = "qup13";
 			};
 
-			qup_uart11_tx: qup-uart11-tx {
+			qup_uart11_tx: qup-uart11-tx-pins {
 				pins = "gpio46";
 				function = "qup13";
 			};
 
-			qup_uart11_rx: qup-uart11-rx {
+			qup_uart11_rx: qup-uart11-rx-pins {
 				pins = "gpio47";
 				function = "qup13";
 			};
 
-			qup_uart12_cts: qup-uart12-cts {
+			qup_uart12_cts: qup-uart12-cts-pins {
 				pins = "gpio48";
 				function = "qup14";
 			};
 
-			qup_uart12_rts: qup-uart12-rts {
+			qup_uart12_rts: qup-uart12-rts-pins {
 				pins = "gpio49";
 				function = "qup14";
 			};
 
-			qup_uart12_tx: qup-uart12-tx {
+			qup_uart12_tx: qup-uart12-tx-pins {
 				pins = "gpio50";
 				function = "qup14";
 			};
 
-			qup_uart12_rx: qup-uart12-rx {
+			qup_uart12_rx: qup-uart12-rx-pins {
 				pins = "gpio51";
 				function = "qup14";
 			};
 
-			qup_uart13_cts: qup-uart13-cts {
+			qup_uart13_cts: qup-uart13-cts-pins {
 				pins = "gpio52";
 				function = "qup15";
 			};
 
-			qup_uart13_rts: qup-uart13-rts {
+			qup_uart13_rts: qup-uart13-rts-pins {
 				pins = "gpio53";
 				function = "qup15";
 			};
 
-			qup_uart13_tx: qup-uart13-tx {
+			qup_uart13_tx: qup-uart13-tx-pins {
 				pins = "gpio54";
 				function = "qup15";
 			};
 
-			qup_uart13_rx: qup-uart13-rx {
+			qup_uart13_rx: qup-uart13-rx-pins {
 				pins = "gpio55";
 				function = "qup15";
 			};
 
-			qup_uart14_cts: qup-uart14-cts {
+			qup_uart14_cts: qup-uart14-cts-pins {
 				pins = "gpio56";
 				function = "qup16";
 			};
 
-			qup_uart14_rts: qup-uart14-rts {
+			qup_uart14_rts: qup-uart14-rts-pins {
 				pins = "gpio57";
 				function = "qup16";
 			};
 
-			qup_uart14_tx: qup-uart14-tx {
+			qup_uart14_tx: qup-uart14-tx-pins {
 				pins = "gpio58";
 				function = "qup16";
 			};
 
-			qup_uart14_rx: qup-uart14-rx {
+			qup_uart14_rx: qup-uart14-rx-pins {
 				pins = "gpio59";
 				function = "qup16";
 			};
 
-			qup_uart15_cts: qup-uart15-cts {
+			qup_uart15_cts: qup-uart15-cts-pins {
 				pins = "gpio60";
 				function = "qup17";
 			};
 
-			qup_uart15_rts: qup-uart15-rts {
+			qup_uart15_rts: qup-uart15-rts-pins {
 				pins = "gpio61";
 				function = "qup17";
 			};
 
-			qup_uart15_tx: qup-uart15-tx {
+			qup_uart15_tx: qup-uart15-tx-pins {
 				pins = "gpio62";
 				function = "qup17";
 			};
 
-			qup_uart15_rx: qup-uart15-rx {
+			qup_uart15_rx: qup-uart15-rx-pins {
 				pins = "gpio63";
 				function = "qup17";
 			};
 
-			sdc1_clk: sdc1-clk {
+			sdc1_clk: sdc1-clk-pins {
 				pins = "sdc1_clk";
 			};
 
-			sdc1_cmd: sdc1-cmd {
+			sdc1_cmd: sdc1-cmd-pins {
 				pins = "sdc1_cmd";
 			};
 
-			sdc1_data: sdc1-data {
+			sdc1_data: sdc1-data-pins {
 				pins = "sdc1_data";
 			};
 
-			sdc1_rclk: sdc1-rclk {
+			sdc1_rclk: sdc1-rclk-pins {
 				pins = "sdc1_rclk";
 			};
 
-			sdc1_clk_sleep: sdc1-clk-sleep {
+			sdc1_clk_sleep: sdc1-clk-sleep-pins {
 				pins = "sdc1_clk";
 				drive-strength = <2>;
 				bias-bus-hold;
 			};
 
-			sdc1_cmd_sleep: sdc1-cmd-sleep {
+			sdc1_cmd_sleep: sdc1-cmd-sleep-pins {
 				pins = "sdc1_cmd";
 				drive-strength = <2>;
 				bias-bus-hold;
 			};
 
-			sdc1_data_sleep: sdc1-data-sleep {
+			sdc1_data_sleep: sdc1-data-sleep-pins {
 				pins = "sdc1_data";
 				drive-strength = <2>;
 				bias-bus-hold;
 			};
 
-			sdc1_rclk_sleep: sdc1-rclk-sleep {
+			sdc1_rclk_sleep: sdc1-rclk-sleep-pins {
 				pins = "sdc1_rclk";
 				drive-strength = <2>;
 				bias-bus-hold;
 			};
 
-			sdc2_clk: sdc2-clk {
+			sdc2_clk: sdc2-clk-pins {
 				pins = "sdc2_clk";
 			};
 
-			sdc2_cmd: sdc2-cmd {
+			sdc2_cmd: sdc2-cmd-pins {
 				pins = "sdc2_cmd";
 			};
 
-			sdc2_data: sdc2-data {
+			sdc2_data: sdc2-data-pins {
 				pins = "sdc2_data";
 			};
 
-			sdc2_clk_sleep: sdc2-clk-sleep {
+			sdc2_clk_sleep: sdc2-clk-sleep-pins {
 				pins = "sdc2_clk";
 				drive-strength = <2>;
 				bias-bus-hold;
 			};
 
-			sdc2_cmd_sleep: sdc2-cmd-sleep {
+			sdc2_cmd_sleep: sdc2-cmd-sleep-pins {
 				pins = "sdc2_cmd";
 				drive-strength = <2>;
 				bias-bus-hold;
 			};
 
-			sdc2_data_sleep: sdc2-data-sleep {
+			sdc2_data_sleep: sdc2-data-sleep-pins {
 				pins = "sdc2_data";
 				drive-strength = <2>;
 				bias-bus-hold;
-- 
2.34.1

[PATCH v2 40/40] arm64: dts: qcom: sc7280-herobrine: correct TLMM gpio-line-names

[Krzysztof Kozlowski]

There are 174 GPIOs in SC7280.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
index bc795c480352..3448e9ed8b03 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
@@ -371,7 +371,5 @@ &tlmm {
 			  "",				/* 170 */
 			  "MOS_BLE_UART_TX",
 			  "MOS_BLE_UART_RX",
-			  "",
-			  "",
 			  "";
 };
-- 
2.34.1

Re: [PATCH v2 00/40] pinctrl/arm64: qcom: fix some of Qualcomm pinctrl schema warnings

[Bjorn Andersson]

On Mon, Sep 12, 2022 at 08:17:06AM +0200, Krzysztof Kozlowski wrote:
> Hi,
> 
> That's a set for some of arm64 pinctrl bindings fixing most common warnings.  I
> have a plan to continue this for remaining arm64 (sm8250 needs updates) and for
> arm.

Very nice.

Reviewed-by: Bjorn Andersson <andersson@kernel.org>

@Linus, please pick the dt binding patches through your tree. I will
pick the dts changes at the end.

Regards,
Bjorn

> 
> Changes since v1
> ================
> 1. Correct commit msg in commits "fix matching pin config".
> 2. Correct commit msg in commit #2 .
> 3. Add Rb tags.
> 
> Dependencies
> ============
> 1. dt-bindings are independent of DTS patches.
> 
> Best regards,
> Krzysztof
> 
> Krzysztof Kozlowski (40):
>   dt-bindings: pinctrl: qcom,sm6115-pinctrl: fix matching pin config
>   dt-bindings: pinctrl: qcom,sm6115-pinctrl: require function on GPIOs
>   dt-bindings: pinctrl: qcom,sm6115-pinctrl: fix indentation in example
>   dt-bindings: pinctrl: qcom,sm6125-pinctrl: fix matching pin config
>   dt-bindings: pinctrl: qcom,sm6125-pinctrl: do not require function on
>     non-GPIOs
>   dt-bindings: pinctrl: qcom,sm6125-pinctrl: extend example
>   dt-bindings: pinctrl: qcom,sm6350-pinctrl: fix matching pin config
>   dt-bindings: pinctrl: qcom,sm6350-pinctrl: do not require function on
>     non-GPIOs
>   dt-bindings: pinctrl: qcom,sm6350-pinctrl: fix indentation in example
>   dt-bindings: pinctrl: qcom,sm6375-pinctrl: fix matching pin config
>   dt-bindings: pinctrl: qcom,sm6375-pinctrl: do not require function on
>     non-GPIOs
>   dt-bindings: pinctrl: qcom,sm6375-pinctrl: fix indentation in example
>   dt-bindings: pinctrl: qcom,sm8250-pinctrl: do not require function on
>     non-GPIOs
>   dt-bindings: pinctrl: qcom,sm8250-pinctrl: reference tlmm common pins
>   dt-bindings: pinctrl: qcom,sm8250-pinctrl: fix indentation in example
>   dt-bindings: pinctrl: qcom,sm8350-pinctrl: fix matching pin config
>   dt-bindings: pinctrl: qcom,sm8350-pinctrl: fix indentation in example
>   dt-bindings: pinctrl: qcom,sm8350-pinctrl: do not require function on
>     non-GPIOs
>   dt-bindings: pinctrl: qcom,sm8450-pinctrl: fix matching pin config
>   dt-bindings: pinctrl: qcom,sm8450-pinctrl: fix indentation in example
>   dt-bindings: pinctrl: qcom,sm8450-pinctrl: do not require function on
>     non-GPIOs
>   dt-bindings: pinctrl: qcom,sm8450-pinctrl: add gpio-line-names
>   dt-bindings: pinctrl: qcom,sc7280-pinctrl: correct number of GPIOs
>   dt-bindings: pinctrl: qcom,sc7280-pinctrl: do not require function on
>     non-GPIOs
>   dt-bindings: pinctrl: qcom,sc7280-pinctrl: add gpio-line-names
>   dt-bindings: pinctrl: qcom,sc7280-pinctrl: reference tlmm schema
>   dt-bindings: pinctrl: qcom,sc7280-pinctrl: fix indentation in example
>   dt-bindings: pinctrl: qcom,sc8180x-pinctrl: fix matching pin config
>   dt-bindings: pinctrl: qcom,sc8180x-pinctrl: do not require function on
>     non-GPIOs
>   dt-bindings: pinctrl: qcom,sc8180x-pinctrl: fix indentation in example
>   dt-bindings: pinctrl: qcom,sc8280xp-pinctrl: fix matching pin config
>   dt-bindings: pinctrl: qcom,sc8280xp-pinctrl: do not require function
>     on non-GPIOs
>   dt-bindings: pinctrl: qcom,sc8280xp-pinctrl: fix indentation in
>     example
>   arm64: dts: qcom: sm6125: align TLMM pin configuration with DT schema
>   arm64: dts: qcom: sm6350: align TLMM pin configuration with DT schema
>   arm64: dts: qcom: sm8350-sagami: correct TS pin property
>   arm64: dts: qcom: sm8350: align TLMM pin configuration with DT schema
>   arm64: dts: qcom: sm8450: align TLMM pin configuration with DT schema
>   arm64: dts: qcom: sc7280: align TLMM pin configuration with DT schema
>   arm64: dts: qcom: sc7280-herobrine: correct TLMM gpio-line-names
> 
>  .../bindings/pinctrl/qcom,sc7280-pinctrl.yaml |  55 +--
>  .../pinctrl/qcom,sc8180x-pinctrl.yaml         |  79 +++--
>  .../pinctrl/qcom,sc8280xp-pinctrl.yaml        |  73 ++--
>  .../bindings/pinctrl/qcom,sm6115-pinctrl.yaml |  94 +++---
>  .../bindings/pinctrl/qcom,sm6125-pinctrl.yaml |  61 +++-
>  .../bindings/pinctrl/qcom,sm6350-pinctrl.yaml |  73 ++--
>  .../bindings/pinctrl/qcom,sm6375-tlmm.yaml    |  73 ++--
>  .../bindings/pinctrl/qcom,sm8250-pinctrl.yaml |  41 ++-
>  .../bindings/pinctrl/qcom,sm8350-pinctrl.yaml |  73 ++--
>  .../bindings/pinctrl/qcom,sm8450-pinctrl.yaml |  82 +++--
>  .../boot/dts/qcom/sc7280-herobrine-crd.dts    |   2 -
>  .../arm64/boot/dts/qcom/sc7280-herobrine.dtsi |  44 +--
>  .../arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi |   8 +-
>  arch/arm64/boot/dts/qcom/sc7280-idp.dtsi      |  20 +-
>  arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi    |  14 +-
>  arch/arm64/boot/dts/qcom/sc7280.dtsi          | 316 +++++++++---------
>  .../qcom/sm6125-sony-xperia-seine-pdx201.dts  |   4 +-
>  arch/arm64/boot/dts/qcom/sm6125.dtsi          |  10 +-
>  arch/arm64/boot/dts/qcom/sm6350.dtsi          |  14 +-
>  .../dts/qcom/sm8350-sony-xperia-sagami.dtsi   |   4 +-
>  arch/arm64/boot/dts/qcom/sm8350.dtsi          |  44 +--
>  .../qcom/sm8450-sony-xperia-nagara-pdx223.dts |  12 +-
>  arch/arm64/boot/dts/qcom/sm8450.dtsi          | 152 ++++-----
>  23 files changed, 733 insertions(+), 615 deletions(-)
> 
> -- 
> 2.34.1
> 

Re: (subset) [PATCH v2 00/40] pinctrl/arm64: qcom: fix some of Qualcomm pinctrl schema warnings

[Bjorn Andersson]

On Mon, 12 Sep 2022 08:17:06 +0200, Krzysztof Kozlowski wrote:
> That's a set for some of arm64 pinctrl bindings fixing most common warnings.  I
> have a plan to continue this for remaining arm64 (sm8250 needs updates) and for
> arm.
> 
> Changes since v1
> ================
> 1. Correct commit msg in commits "fix matching pin config".
> 2. Correct commit msg in commit #2 .
> 3. Add Rb tags.
> 
> [...]

Applied, thanks!

[34/40] arm64: dts: qcom: sm6125: align TLMM pin configuration with DT schema
        commit: be24fd19b1b42e0b38e77e0d6a379282bafb6aa6
[35/40] arm64: dts: qcom: sm6350: align TLMM pin configuration with DT schema
        commit: 448f5a002fedb2ff2d19e5a563d3af1ea5e123e1
[36/40] arm64: dts: qcom: sm8350-sagami: correct TS pin property
        commit: c9c53d1f4329564f98ed0decfe3c377c6639ec5d
[37/40] arm64: dts: qcom: sm8350: align TLMM pin configuration with DT schema
        commit: e227fa2970fd259fa65f97c4defb0b85dffc62d7
[38/40] arm64: dts: qcom: sm8450: align TLMM pin configuration with DT schema
        commit: a73747528867fabea8e285a1b604594181091507
[39/40] arm64: dts: qcom: sc7280: align TLMM pin configuration with DT schema
        commit: d801357a0573105ff5db9fbfde80c3572369a261
[40/40] arm64: dts: qcom: sc7280-herobrine: correct TLMM gpio-line-names
        commit: e0eeb08522c94860c3528816f612c335a6d6552c

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>

Re: [PATCH v2 00/40] pinctrl/arm64: qcom: fix some of Qualcomm pinctrl schema warnings

[Linus Walleij]

On Mon, Sep 12, 2022 at 8:17 AM Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:

> That's a set for some of arm64 pinctrl bindings fixing most common warnings.  I
> have a plan to continue this for remaining arm64 (sm8250 needs updates) and for
> arm.

I applied patches 1-33 to the pinctrl tree after I saw Bjorn was happy
and has applied the DTS changes.

Yours,
Linus Walleij