Re: [PATCH V3 3/3] dt-bindings: pinctrl: qcom-pmic-gpio: Convert qcom pmic gpio bindings to YAML

[skakit@codeaurora.org]

On 2021-05-13 23:13, Guru Das Srinagesh wrote:
> On Wed, May 12, 2021 at 04:43:08PM +0530, satya priya wrote:
>> diff --git 
>> a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml 
>> b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
>> new file mode 100644
>> index 0000000..85381a0
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
>> @@ -0,0 +1,245 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/pinctrl/qcom,pmic-gpio.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Qualcomm PMIC GPIO block
>> +
>> +maintainers:
>> +  - Bjorn Andersson <bjorn.andersson@sonymobile.com>
>> +
>> +description: |
>> +  This binding describes the GPIO block(s) found in the 8xxx series 
>> of
>> +  PMIC's from Qualcomm.
>> +
>> +properties:
>> +  compatible:
>> +    items:
>> +      - enum:
>> +          - qcom,pm8005-gpio
> 
> pm8008 has been missed out in the yaml file during the conversion. 
> could
> you please add this as well?
> 

Will add it, thanks.

>> +          - qcom,pm8018-gpio
>> +          - qcom,pm8038-gpio
>> +          - qcom,pm8058-gpio
>> +          - qcom,pm8916-gpio
>> +          - qcom,pm8917-gpio
>> +          - qcom,pm8921-gpio
>> +          - qcom,pm8941-gpio
>> +          - qcom,pm8950-gpio
>> +          - qcom,pm8994-gpio
>> +          - qcom,pm8998-gpio
>> +          - qcom,pma8084-gpio
>> +          - qcom,pmi8950-gpio
>> +          - qcom,pmi8994-gpio
>> +          - qcom,pmi8998-gpio
>> +          - qcom,pms405-gpio
>> +          - qcom,pm660-gpio
>> +          - qcom,pm660l-gpio
>> +          - qcom,pm8150-gpio
>> +          - qcom,pm8150b-gpio
>> +          - qcom,pm6150-gpio
>> +          - qcom,pm6150l-gpio
>> +          - qcom,pmx55-gpio
>> +          - qcom,pm7325-gpio
>> +          - qcom,pm8350c-gpio
>> +          - qcom,pmk8350-gpio
>> +          - qcom,pmr735a-gpio
>> +
>> +      - enum:
>> +          - qcom,spmi-gpio
>> +          - qcom,ssbi-gpio
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  interrupts:
>> +    minItems: 1
>> +    maxItems: 44
>> +
>> +  '#interrupt-cells':
>> +    const: 2
>> +
>> +  interrupt-controller: true
>> +
>> +  gpio-controller: true
>> +
>> +  gpio-ranges:
>> +    maxItems: 1
>> +
>> +  '#gpio-cells':
>> +    const: 2
>> +    description: |
>> +        The first cell will be used to define gpio number and the
>> +        second denotes the flags for this gpio
>> +
>> +  gpio-keys:
>> +    type: object
>> +    properties:
>> +      volume-keys:
>> +        type: object
>> +        anyOf:
>> +          - $ref: "pinmux-node.yaml"
>> +          - $ref: "pincfg-node.yaml"
>> +        properties:
>> +          pins:
>> +            description: |
>> +                List of gpio pins affected by the properties 
>> specified in
>> +                this subnode.  Valid pins are
>> +                     - gpio1-gpio4 for pm8005
> 
> pm8008 has been missed out in the yaml file during the conversion. 
> could
> you please add this as well?
> 
>> +                     - gpio1-gpio6 for pm8018
>> +                     - gpio1-gpio12 for pm8038
>> +                     - gpio1-gpio40 for pm8058