Re: pinctrl-cherryview regression in linux-next on preproduction Braswell

[Jarkko Nikula <jarkko.nikula@linux.intel.com>]

[-- Attachment #1: Type: text/plain, Size: 1724 bytes --]

Hi

On 1/4/22 12:48, Hans de Goede wrote:
> So I've written another patch, which I believe is something which we will want
> regardless of the question if we should mask interrupts at boot or not.
> 
> I've attached this patch here. Jarkko, can you test a linux-next kernel with
> just this patch added?
> 
> This should still lead to the "interrupt on unused interrupt line %u" message
> getting printed, but hopefully the system will actually boot despite this,
> since the code path printing the msg now acks the interrupt.
> 
> Thinking more about this I believe that this is likely the correct fix for
> the caused regression, because the spurious IRQ was always there already.
> 
> Fixing the spurious IRQ is still good to do but is a somewhat separate issue
> really.
> 
Unfortunately it doesn't fix:

[   13.060619] cherryview-pinctrl INT33FF:00: interrupt on unused 
interrupt line 0
[   13.068888] cherryview-pinctrl INT33FF:00: interrupt on unused 
interrupt line 0
[   13.077146] cherryview-pinctrl INT33FF:00: interrupt on unused 
interrupt line 0
[   13.085364] cherryview-pinctrl INT33FF:00: interrupt on unused 
interrupt line 0
...

I did dev_err_ratelimited() conversion to the error print together with 
your patch and that allowed to boot.

That gave me an idea to look at is there anything suspicious in "top" or 
/proc/interrupts (no and no) but powertop shows CPU 0 is over 90 % in C0 
state and max frequency.

But comparing powertop on v5.16-rc8 it does look sometimes the same and 
sometimes CPU 0 is less in C0 (but still over 30 %). Hard to say is 
there difference but obviously v5.16-rc8 either is not good on this 
machine since CPU 0 and package seems to reach idle only 5 % or less.

Jarkko

[-- Attachment #2: dmesg_20220104-ack-with-ratelimited --]
[-- Type: text/plain, Size: 55795 bytes --]

[    0.000000] Linux version 5.16.0-rc6-next-20211224+ (jarkkoni@mylly) (gcc (Debian 11.2.0-13) 11.2.0, GNU ld (GNU Binutils for Debian) 2.37) #6 SMP PREEMPT Tue Jan 4 09:58:24 EET 2022
[    0.000000] Command line: console=ttyS0,115200 loglevel=8 buildroot_hostname=bsw02 noinitrd root=PARTUUID=a4910aac-02 resume=PARTUUID=a4910aac-03 acpi_dma.dyndbg=+p pinctrl-cherryview.dyndbg=+p dmi_entry_point=0x7b558000
               acpi_rsdp=0x7b755014 mac=00:e0:4c:68:00:37
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] signal: max sigframe size: 1440
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000100-0x000000000008efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001effffff] usable
[    0.000000] BIOS-e820: [mem 0x000000001f000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000007b50afff] usable
[    0.000000] BIOS-e820: [mem 0x000000007b50b000-0x000000007b65bfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007b65c000-0x000000007b72afff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007b72b000-0x000000007b755fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007b756000-0x000000007b756fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007b757000-0x000000007b757fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007b758000-0x000000007b75afff] usable
[    0.000000] BIOS-e820: [mem 0x000000007b75b000-0x000000007b75bfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007b75c000-0x000000007bffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000feafffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed06000-0x00000000fed06fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed09fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fedbffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI not present or invalid.
[    0.000000] tsc: Detected 1600.000 MHz processor
[    0.000067] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000109] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000160] last_pfn = 0x180000 max_arch_pfn = 0x400000000
[    0.000255] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.003005] last_pfn = 0x7c000 max_arch_pfn = 0x400000000
[    0.009157] ACPI: Early table checksum verification disabled
[    0.009185] ACPI: RSDP 0x000000007B755014 000024 (v02 INTEL )
[    0.009223] ACPI: XSDT 0x000000007B7540E8 00008C (v01 INTEL  EDK2     00000003      01000013)
[    0.009264] ACPI: FACP 0x000000007B750000 00010C (v05 INTEL  EDK2     00000003 CHV  0100000D)
[    0.009309] ACPI: DSDT 0x000000007B73D000 00CD83 (v02 INTEL  EDK2     00000003 CHV  0100000D)
[    0.009347] ACPI: FACS 0x000000007B706000 000040
[    0.009380] ACPI: TCPA 0x000000007B753000 000032 (v02 INTEL  EDK2     00000002      01000013)
[    0.009416] ACPI: SSDT 0x000000007B752000 0000B1 (v01 Intel_ ADebTabl 00001000 INTL 20141107)
[    0.009452] ACPI: UEFI 0x000000007B709000 000042 (v01 INTEL  EDK2     00000002      01000013)
[    0.009487] ACPI: MCFG 0x000000007B74E000 00003C (v01 INTEL  EDK2     00000003 CHV  0100000D)
[    0.009523] ACPI: SSDT 0x000000007B73C000 000451 (v01 Intel_ Tpm2Tabl 00001000 INTL 20141107)
[    0.009559] ACPI: TPM2 0x000000007B73B000 000034 (v03                 00000000      00000000)
[    0.009594] ACPI: SSDT 0x000000007B73A000 000763 (v01 PmRef  CpuPm    00003000 INTL 20141107)
[    0.009630] ACPI: SSDT 0x000000007B739000 000290 (v01 PmRef  Cpu0Tst  00003000 INTL 20141107)
[    0.009665] ACPI: SSDT 0x000000007B738000 00017A (v01 PmRef  ApTst    00003000 INTL 20141107)
[    0.009700] ACPI: APIC 0x000000007B74F000 000084 (v03 INTEL  EDK2     00000003 CHV  0100000D)
[    0.009736] ACPI: CSRT 0x000000007B751000 00014C (v00 INTEL  EDK2     00000003 CHV  0100000D)
[    0.009771] ACPI: FPDT 0x000000007B737000 000044 (v01 INTEL  EDK2     00000002      01000013)
[    0.009804] ACPI: Reserving FACP table memory at [mem 0x7b750000-0x7b75010b]
[    0.009822] ACPI: Reserving DSDT table memory at [mem 0x7b73d000-0x7b749d82]
[    0.009838] ACPI: Reserving FACS table memory at [mem 0x7b706000-0x7b70603f]
[    0.009853] ACPI: Reserving TCPA table memory at [mem 0x7b753000-0x7b753031]
[    0.009869] ACPI: Reserving SSDT table memory at [mem 0x7b752000-0x7b7520b0]
[    0.009884] ACPI: Reserving UEFI table memory at [mem 0x7b709000-0x7b709041]
[    0.009899] ACPI: Reserving MCFG table memory at [mem 0x7b74e000-0x7b74e03b]
[    0.009914] ACPI: Reserving SSDT table memory at [mem 0x7b73c000-0x7b73c450]
[    0.009930] ACPI: Reserving TPM2 table memory at [mem 0x7b73b000-0x7b73b033]
[    0.009945] ACPI: Reserving SSDT table memory at [mem 0x7b73a000-0x7b73a762]
[    0.009960] ACPI: Reserving SSDT table memory at [mem 0x7b739000-0x7b73928f]
[    0.009976] ACPI: Reserving SSDT table memory at [mem 0x7b738000-0x7b738179]
[    0.009991] ACPI: Reserving APIC table memory at [mem 0x7b74f000-0x7b74f083]
[    0.010007] ACPI: Reserving CSRT table memory at [mem 0x7b751000-0x7b75114b]
[    0.010023] ACPI: Reserving FPDT table memory at [mem 0x7b737000-0x7b737043]
[    0.010158] Zone ranges:
[    0.010175]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.010198]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.010220]   Normal   [mem 0x0000000100000000-0x000000017fffffff]
[    0.010240] Movable zone start for each node
[    0.010253] Early memory node ranges
[    0.010264]   node   0: [mem 0x0000000000001000-0x000000000008efff]
[    0.010281]   node   0: [mem 0x0000000000090000-0x000000000009dfff]
[    0.010296]   node   0: [mem 0x0000000000100000-0x000000001effffff]
[    0.010312]   node   0: [mem 0x0000000020200000-0x000000007b50afff]
[    0.010328]   node   0: [mem 0x000000007b756000-0x000000007b756fff]
[    0.010343]   node   0: [mem 0x000000007b758000-0x000000007b75afff]
[    0.010358]   node   0: [mem 0x000000007b75c000-0x000000007bffffff]
[    0.010374]   node   0: [mem 0x0000000100000000-0x000000017fffffff]
[    0.010392] Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff]
[    0.010423] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.010436] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.010541] On node 0, zone DMA: 98 pages in unavailable ranges
[    0.022695] On node 0, zone DMA32: 4608 pages in unavailable ranges
[    0.022740] On node 0, zone DMA32: 587 pages in unavailable ranges
[    0.022756] On node 0, zone DMA32: 1 pages in unavailable ranges
[    0.022825] On node 0, zone DMA32: 1 pages in unavailable ranges
[    0.036162] On node 0, zone Normal: 16384 pages in unavailable ranges
[    0.036199] Reserving Intel graphics memory at [mem 0x7cc00000-0x7ebfffff]
[    0.036787] ACPI: PM-Timer IO Port: 0x408
[    0.036830] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[    0.036853] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[    0.036868] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[    0.036883] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[    0.036962] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114
[    0.037027] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.037051] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.037081] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.037101] TSC deadline timer available
[    0.037116] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.037300] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.037327] PM: hibernation: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[    0.037349] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.037364] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.037384] PM: hibernation: Registered nosave memory: [mem 0x1f000000-0x201fffff]
[    0.037405] PM: hibernation: Registered nosave memory: [mem 0x7b50b000-0x7b65bfff]
[    0.037420] PM: hibernation: Registered nosave memory: [mem 0x7b65c000-0x7b72afff]
[    0.037434] PM: hibernation: Registered nosave memory: [mem 0x7b72b000-0x7b755fff]
[    0.037454] PM: hibernation: Registered nosave memory: [mem 0x7b757000-0x7b757fff]
[    0.037475] PM: hibernation: Registered nosave memory: [mem 0x7b75b000-0x7b75bfff]
[    0.037496] PM: hibernation: Registered nosave memory: [mem 0x7c000000-0x7cbfffff]
[    0.037511] PM: hibernation: Registered nosave memory: [mem 0x7cc00000-0x7ebfffff]
[    0.037525] PM: hibernation: Registered nosave memory: [mem 0x7ec00000-0xdfffffff]
[    0.037539] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xe3ffffff]
[    0.037553] PM: hibernation: Registered nosave memory: [mem 0xe4000000-0xfe9fffff]
[    0.037568] PM: hibernation: Registered nosave memory: [mem 0xfea00000-0xfeafffff]
[    0.037582] PM: hibernation: Registered nosave memory: [mem 0xfeb00000-0xfebfffff]
[    0.037596] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.037610] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfed00fff]
[    0.037624] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[    0.037638] PM: hibernation: Registered nosave memory: [mem 0xfed02000-0xfed02fff]
[    0.037652] PM: hibernation: Registered nosave memory: [mem 0xfed03000-0xfed03fff]
[    0.037666] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfed05fff]
[    0.037680] PM: hibernation: Registered nosave memory: [mem 0xfed06000-0xfed06fff]
[    0.037695] PM: hibernation: Registered nosave memory: [mem 0xfed07000-0xfed07fff]
[    0.037709] PM: hibernation: Registered nosave memory: [mem 0xfed08000-0xfed09fff]
[    0.037723] PM: hibernation: Registered nosave memory: [mem 0xfed0a000-0xfed1bfff]
[    0.037737] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1cfff]
[    0.037751] PM: hibernation: Registered nosave memory: [mem 0xfed1d000-0xfed7ffff]
[    0.037765] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfedbffff]
[    0.037779] PM: hibernation: Registered nosave memory: [mem 0xfedc0000-0xfedfffff]
[    0.037793] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.037807] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff]
[    0.037835] [mem 0x7ec00000-0xdfffffff] available for PCI devices
[    0.037866] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.037932] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[    0.039162] percpu: Embedded 70 pages/cpu s248144 r8192 d30384 u524288
[    0.039219] pcpu-alloc: s248144 r8192 d30384 u524288 alloc=1*2097152
[    0.039249] pcpu-alloc: [0] 0 1 2 3 
[    0.039413] Built 1 zonelists, mobility grouping on.  Total pages: 1010692
[    0.039463] Kernel command line: console=ttyS0,115200 loglevel=8 buildroot_hostname=bsw02 noinitrd root=PARTUUID=a4910aac-02 resume=PARTUUID=a4910aac-03 acpi_dma.dyndbg=+p pinctrl-cherryview.dyndbg=+p dmi_entry_point=0x7b558000
               acpi_rsdp=0x7b755014 mac=00:e0:4c:68:00:37
[    0.039783] Unknown kernel command line parameters "buildroot_hostname=bsw02 dmi_entry_point=0x7b558000 mac=00:e0:4c:68:00:37", will be passed to user space.
[    0.039810] printk: log_buf_len individual max cpu contribution: 262144 bytes
[    0.039826] printk: log_buf_len total cpu_extra contributions: 786432 bytes
[    0.039843] printk: log_buf_len min size: 262144 bytes
[    0.043020] printk: log_buf_len: 1048576 bytes
[    0.043042] printk: early log buf free: 250664(95%)
[    0.044564] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.045348] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.045481] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.138181] Memory: 3928088K/4107580K available (12295K kernel code, 2063K rwdata, 3816K rodata, 1104K init, 13088K bss, 179236K reserved, 0K cma-reserved)
[    0.138688] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.139278] Dynamic Preempt: full
[    0.139790] Running RCU self tests
[    0.139853] rcu: Preemptible hierarchical RCU implementation.
[    0.139874] rcu: 	RCU lockdep checking is enabled.
[    0.139890] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.139908] 	Trampoline variant of Tasks RCU enabled.
[    0.139920] 	Tracing variant of Tasks RCU enabled.
[    0.139934] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.139949] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.144684] NR_IRQS: 4352, nr_irqs: 1024, preallocated irqs: 16
[    0.145958] random: get_random_bytes called from start_kernel+0x423/0x5e0 with crng_init=0
[    0.146311] Console: colour dummy device 80x25
[    1.494201] printk: console [ttyS0] enabled
[    1.498892] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    1.507560] ... MAX_LOCKDEP_SUBCLASSES:  8
[    1.512150] ... MAX_LOCK_DEPTH:          48
[    1.516834] ... MAX_LOCKDEP_KEYS:        8192
[    1.521718] ... CLASSHASH_SIZE:          4096
[    1.526601] ... MAX_LOCKDEP_ENTRIES:     32768
[    1.531581] ... MAX_LOCKDEP_CHAINS:      65536
[    1.536561] ... CHAINHASH_SIZE:          32768
[    1.541541]  memory used by lock dependency info: 6365 kB
[    1.547585]  memory used for stack traces: 4224 kB
[    1.552952]  per task-struct memory footprint: 1920 bytes
[    1.559072] ACPI: Core revision 20210930
[    1.564746] APIC: Switch to symmetric I/O mode setup
[    1.573059] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x171024fa93b, max_idle_ns: 440795253189 ns
[    1.584876] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.00 BogoMIPS (lpj=6400000)
[    1.588874] pid_max: default: 32768 minimum: 301
[    1.588874] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    1.588874] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    1.588874] CPU0: Thermal monitoring enabled (TM1)
[    1.588874] process: using mwait in idle threads
[    1.588874] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    1.588874] Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0
[    1.588874] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    1.588874] Spectre V2 : Mitigation: Full generic retpoline
[    1.588874] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    1.588874] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    1.588874] Freeing SMP alternatives memory: 28K
[    1.588874] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1587
[    1.588874] smpboot: CPU0: Intel(R) Celeron(R) CPU  N3060  @ 1.60GHz (family: 0x6, model: 0x4c, stepping: 0x4)
[    1.591906] cblist_init_generic: Setting adjustable number of callback queues.
[    1.592894] cblist_init_generic: Setting shift to 2 and lim to 1.
[    1.597397] cblist_init_generic: Setting shift to 2 and lim to 1.
[    1.601342] Running RCU-tasks wait API self tests
[    1.709408] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
[    1.712924] ... version:                3
[    1.717045] Callback from call_rcu_tasks_trace() invoked.
[    1.720924] ... bit width:              40
[    1.724947] ... generic registers:      2
[    1.728899] ... value mask:             000000ffffffffff
[    1.732988] ... max period:             0000007fffffffff
[    1.736899] ... fixed-purpose events:   3
[    1.740897] ... event mask:             0000000700000003
[    1.746680] rcu: Hierarchical SRCU implementation.
[    1.752613] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    1.754455] smp: Bringing up secondary CPUs ...
[    1.760201] x86: Booting SMP configuration:
[    1.760962] .... node  #0, CPUs:      #1
[    1.762496] smp: Brought up 1 node, 2 CPUs
[    1.768962] smpboot: Max logical packages: 2
[    1.772912] smpboot: Total of 2 processors activated (6400.00 BogoMIPS)
[    1.780946] devtmpfs: initialized
[    1.788997] ACPI: PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[    1.792910] ACPI: PM: Registering ACPI NVS region [mem 0x7b65c000-0x7b72afff] (847872 bytes)
[    1.817773] DMA-API: preallocated 65536 debug entries
[    1.820904] DMA-API: debugging enabled by kernel config
[    1.824906] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    1.828925] futex hash table entries: 1024 (order: 5, 131072 bytes, linear)
[    1.833535] pinctrl core: initialized pinctrl subsystem
[    1.838048] PM: RTC time: 13:17:02, date: 2022-01-04
[    1.842269] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    1.849923] thermal_sys: Registered thermal governor 'step_wise'
[    1.849949] thermal_sys: Registered thermal governor 'user_space'
[    1.853276] cpuidle: using governor ladder
[    1.861065] cpuidle: using governor menu
[    1.865894] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    1.868920] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[    1.873245] PCI: Using configuration type 1 for base access
[    1.917532] Callback from call_rcu_tasks() invoked.
[    1.921745] cryptd: max_cpu_qlen set to 1000
[    1.932906] ACPI: Added _OSI(Module Device)
[    1.936945] ACPI: Added _OSI(Processor Device)
[    1.940930] ACPI: Added _OSI(3.0 _SCP Extensions)
[    1.944926] ACPI: Added _OSI(Processor Aggregator Device)
[    1.952950] ACPI: Added _OSI(Linux-Dell-Video)
[    1.956942] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    1.964948] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    2.250099] ACPI: 6 ACPI AML tables successfully acquired and loaded
[    2.351463] ACPI: Dynamic OEM Table Load:
[    2.357094] ACPI: SSDT 0xFFFF88810033B000 0006B8 (v01 PmRef  Cpu0Ist  00003000 INTL 20141107)
[    2.411048] ACPI: Dynamic OEM Table Load:
[    2.417181] ACPI: SSDT 0xFFFF8881002F2000 0003A5 (v01 PmRef  Cpu0Cst  00003001 INTL 20141107)
[    2.477839] ACPI: Dynamic OEM Table Load:
[    2.481074] ACPI: SSDT 0xFFFF888100233E00 00015F (v01 PmRef  ApIst    00003000 INTL 20141107)
[    2.532417] ACPI: Dynamic OEM Table Load:
[    2.537122] ACPI: SSDT 0xFFFF8881003E4840 00008D (v01 PmRef  ApCst    00003000 INTL 20141107)
[    2.603493] ACPI: EC: EC started
[    2.608922] ACPI: EC: interrupt blocked
[    2.915375] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    2.921295] ACPI: \_SB_.PCI0.LPCB.H_EC: Boot DSDT EC used to handle transactions
[    2.928949] ACPI: Interpreter enabled
[    2.933509] ACPI: PM: (supports S0 S3 S4 S5)
[    2.941041] ACPI: Using IOAPIC for interrupt routing
[    2.945765] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    2.977899] ACPI: Enabled 7 GPEs in block 00 to 3F
[    3.062827] ACPI: PM: Power Resource [USBC]
[    3.207472] ACPI: PM: Power Resource [CLK0]
[    3.223978] ACPI: PM: Power Resource [CLK0]
[    3.230669] ACPI: PM: Power Resource [CLK1]
[    3.297799] ACPI: PM: Power Resource [WRST]
[    3.310172] ACPI: PM: Power Resource [WRST]
[    3.326366] ACPI: PM: Power Resource [WRST]
[    3.338451] ACPI: PM: Power Resource [WRST]
[    3.407535] ACPI: PM: Power Resource [ID3C]
[    3.537522] ACPI: PM: Power Resource [FN00]
[    3.571393] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    3.581000] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    3.596479] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability LTR]
[    3.605130] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    3.623510] PCI host bridge to bus 0000:00
[    3.628964] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
[    3.636944] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
[    3.644942] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
[    3.652940] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    3.660941] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window]
[    3.668984] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[    3.676950] pci_bus 0000:00: root bus resource [bus 00-ff]
[    3.682656] pci 0000:00:00.0: [8086:2280] type 00 class 0x060000
[    3.697416] pci 0000:00:02.0: [8086:22b1] type 00 class 0x030000
[    3.701040] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
[    3.709006] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[    3.716981] pci 0000:00:02.0: reg 0x20: [io  0x2000-0x203f]
[    3.725161] pci 0000:00:02.0: BAR 2: assigned to efifb
[    3.732246] pci 0000:00:03.0: [8086:22b8] type 00 class 0x048000
[    3.741030] pci 0000:00:03.0: reg 0x10: [mem 0x91000000-0x913fffff]
[    3.752550] pci 0000:00:13.0: [8086:22a3] type 00 class 0x010601
[    3.757189] pci 0000:00:13.0: reg 0x20: [io  0x2060-0x207f]
[    3.764980] pci 0000:00:13.0: reg 0x24: [mem 0x91b2f000-0x91b2f7ff]
[    3.773343] pci 0000:00:13.0: PME# supported from D3hot
[    3.780146] pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330
[    3.789097] pci 0000:00:14.0: reg 0x10: [mem 0x91b00000-0x91b0ffff 64bit]
[    3.797475] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    3.811003] pci 0000:00:16.0: [8086:22b7] type 00 class 0x0c03fe
[    3.817024] pci 0000:00:16.0: reg 0x10: [mem 0x91400000-0x915fffff]
[    3.825485] pci 0000:00:16.0: PME# supported from D0 D3hot
[    3.830625] pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000
[    3.837022] pci 0000:00:1a.0: reg 0x10: [mem 0x91a00000-0x91afffff]
[    3.844981] pci 0000:00:1a.0: reg 0x14: [mem 0x91900000-0x919fffff]
[    3.853516] pci 0000:00:1a.0: PME# supported from D0 D3hot
[    3.870655] pci 0000:00:1b.0: [8086:2284] type 00 class 0x040300
[    3.877053] pci 0000:00:1b.0: reg 0x10: [mem 0x91b10000-0x91b13fff 64bit]
[    3.885495] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    3.896244] pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400
[    3.901638] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    3.912239] pci 0000:00:1c.1: [8086:22ca] type 01 class 0x060400
[    3.921714] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    3.932251] pci 0000:00:1c.2: [8086:22cc] type 01 class 0x060400
[    3.937659] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    3.948439] pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100
[    3.960441] pci 0000:00:1f.3: [8086:2292] type 00 class 0x0c0500
[    3.965056] pci 0000:00:1f.3: reg 0x10: [mem 0x91b1c000-0x91b1c01f]
[    3.973184] pci 0000:00:1f.3: reg 0x20: [io  0x2040-0x205f]
[    3.985383] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    3.988945] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    3.996950] pci 0000:00:1c.0:   bridge window [mem 0x91c00000-0x91dfffff]
[    4.004960] pci 0000:00:1c.0:   bridge window [mem 0x91e00000-0x91ffffff 64bit pref]
[    4.015099] pci 0000:02:00.0: [8086:095a] type 00 class 0x028000
[    4.021991] pci 0000:02:00.0: reg 0x10: [mem 0x91800000-0x91801fff 64bit]
[    4.034840] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    4.052572] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    4.056967] pci 0000:00:1c.1:   bridge window [mem 0x91800000-0x918fffff]
[    4.065975] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    4.073027] pci 0000:03:00.0: reg 0x10: [io  0x1000-0x10ff]
[    4.077048] pci 0000:03:00.0: reg 0x18: [mem 0x91700000-0x91700fff 64bit]
[    4.085008] pci 0000:03:00.0: reg 0x20: [mem 0x91600000-0x91603fff 64bit pref]
[    4.093636] pci 0000:03:00.0: supports D1 D2
[    4.100936] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    4.112597] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    4.116954] pci 0000:00:1c.2:   bridge window [io  0x1000-0x1fff]
[    4.124950] pci 0000:00:1c.2:   bridge window [mem 0x91700000-0x917fffff]
[    4.132961] pci 0000:00:1c.2:   bridge window [mem 0x91600000-0x916fffff 64bit pref]
[    4.141058] pci_bus 0000:00: on NUMA node 0
[    5.306940] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    5.313316] ACPI: PCI: Interrupt link LNKA disabled
[    5.323887] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[    5.329191] ACPI: PCI: Interrupt link LNKB disabled
[    5.339793] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    5.344938] ACPI: PCI: Interrupt link LNKC disabled
[    5.351784] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    5.360948] ACPI: PCI: Interrupt link LNKD disabled
[    5.367779] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    5.376947] ACPI: PCI: Interrupt link LNKE disabled
[    5.383852] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    5.388939] ACPI: PCI: Interrupt link LNKF disabled
[    5.400073] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    5.404939] ACPI: PCI: Interrupt link LNKG disabled
[    5.415905] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    5.420939] ACPI: PCI: Interrupt link LNKH disabled
[    5.621462] ACPI: EC: interrupt unblocked
[    5.624918] ACPI: EC: event unblocked
[    5.628919] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    5.636931] ACPI: EC: GPE=0x16
[    5.640421] ACPI: \_SB_.PCI0.LPCB.H_EC: Boot DSDT EC initialization complete
[    5.644956] ACPI: \_SB_.PCI0.LPCB.H_EC: EC: Used to handle transactions and events
[    5.659392] iommu: Default domain type: Translated 
[    5.664931] iommu: DMA domain TLB invalidation policy: lazy mode 
[    5.671080] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    5.672874] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    5.689095] pci 0000:00:02.0: vgaarb: bridge control possible
[    5.696931] vgaarb: loaded
[    5.702722] SCSI subsystem initialized
[    5.705236] libata version 3.00 loaded.
[    5.709774] ACPI: bus type USB registered
[    5.717637] usbcore: registered new interface driver usbfs
[    5.721332] usbcore: registered new interface driver hub
[    5.729232] usbcore: registered new device driver usb
[    5.737260] pps_core: LinuxPPS API ver. 1 registered
[    5.740922] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    5.753073] PTP clock support registered
[    5.757022] power_supply_init_attrs: Property 37 skipped because it is missing from power_supply_attrs
[    5.770739] PCI: Using ACPI for IRQ routing
[    5.787811] PCI: pci_cache_line_size set to 64 bytes
[    5.793564] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[    5.800967] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    5.808941] e820: reserve RAM buffer [mem 0x1f000000-0x1fffffff]
[    5.812973] e820: reserve RAM buffer [mem 0x7b50b000-0x7bffffff]
[    5.820942] e820: reserve RAM buffer [mem 0x7b757000-0x7bffffff]
[    5.828939] e820: reserve RAM buffer [mem 0x7b75b000-0x7bffffff]
[    5.839036] clocksource: Switched to clocksource tsc-early
[    6.313863] pnp: PnP ACPI init
[    6.326388] system 00:00: [io  0x0680-0x069f] has been reserved
[    6.333237] system 00:00: [io  0x0400-0x047f] has been reserved
[    6.340051] system 00:00: [io  0x0500-0x05fe] has been reserved
[    6.417372] system 00:04: [mem 0x91b34000-0x91b34fff] has been reserved
[    6.425098] system 00:04: [mem 0x91b32000-0x91b32fff] has been reserved
[    6.432718] system 00:04: [mem 0x91b30000-0x91b30fff] has been reserved
[    6.440336] system 00:04: [mem 0x91b21000-0x91b21fff] has been reserved
[    6.447952] system 00:04: [mem 0x91b1f000-0x91b1ffff] has been reserved
[    6.455569] system 00:04: [mem 0x91b1d000-0x91b1dfff] has been reserved
[    6.463187] system 00:04: [mem 0x91b2e000-0x91b2efff] has been reserved
[    6.470801] system 00:04: [mem 0x91b2c000-0x91b2cfff] has been reserved
[    6.478458] system 00:04: [mem 0x91b2a000-0x91b2afff] has been reserved
[    6.486079] system 00:04: [mem 0x91b28000-0x91b28fff] has been reserved
[    6.493698] system 00:04: [mem 0x91b26000-0x91b26fff] has been reserved
[    6.501318] system 00:04: [mem 0x91b24000-0x91b24fff] has been reserved
[    6.509031] system 00:04: [mem 0x91b22000-0x91b22fff] has been reserved
[    6.520342] system 00:05: [mem 0xe0000000-0xefffffff] could not be reserved
[    6.528362] system 00:05: [mem 0xfea00000-0xfeafffff] has been reserved
[    6.535981] system 00:05: [mem 0xfed01000-0xfed01fff] has been reserved
[    6.543635] system 00:05: [mem 0xfed03000-0xfed03fff] has been reserved
[    6.551472] system 00:05: [mem 0xfed06000-0xfed06fff] has been reserved
[    6.559131] system 00:05: [mem 0xfed08000-0xfed09fff] has been reserved
[    6.566739] system 00:05: [mem 0xfed80000-0xfedbffff] could not be reserved
[    6.574743] system 00:05: [mem 0xfed1c000-0xfed1cfff] has been reserved
[    6.582347] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    6.602902] pnp: PnP ACPI: found 7 devices
[    6.685766] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    6.697255] NET: Registered PF_INET protocol family
[    6.704019] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    6.721592] tcp_listen_portaddr_hash hash table entries: 2048 (order: 5, 163840 bytes, linear)
[    6.732274] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    6.744148] TCP bind hash table entries: 32768 (order: 9, 2359296 bytes, linear)
[    6.765047] TCP: Hash tables configured (established 32768 bind 32768)
[    6.773579] UDP hash table entries: 2048 (order: 6, 327680 bytes, linear)
[    6.783148] UDP-Lite hash table entries: 2048 (order: 6, 327680 bytes, linear)
[    6.794049] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    6.800717] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    6.806459] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    6.813458] pci 0000:00:1c.0:   bridge window [mem 0x91c00000-0x91dfffff]
[    6.821420] pci 0000:00:1c.0:   bridge window [mem 0x91e00000-0x91ffffff 64bit pref]
[    6.830278] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    6.836015] pci 0000:00:1c.1:   bridge window [mem 0x91800000-0x918fffff]
[    6.843868] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    6.849585] pci 0000:00:1c.2:   bridge window [io  0x1000-0x1fff]
[    6.856583] pci 0000:00:1c.2:   bridge window [mem 0x91700000-0x917fffff]
[    6.864351] pci 0000:00:1c.2:   bridge window [mem 0x91600000-0x916fffff 64bit pref]
[    6.873203] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
[    6.879604] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
[    6.886685] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
[    6.893768] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    6.900846] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000fffff window]
[    6.908849] pci_bus 0000:00: resource 9 [mem 0x80000000-0xdfffffff window]
[    6.916811] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    6.923209] pci_bus 0000:01: resource 1 [mem 0x91c00000-0x91dfffff]
[    6.930421] pci_bus 0000:01: resource 2 [mem 0x91e00000-0x91ffffff 64bit pref]
[    6.938666] pci_bus 0000:02: resource 1 [mem 0x91800000-0x918fffff]
[    6.945842] pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
[    6.952240] pci_bus 0000:03: resource 1 [mem 0x91700000-0x917fffff]
[    6.959413] pci_bus 0000:03: resource 2 [mem 0x91600000-0x916fffff 64bit pref]
[    6.971896] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    6.990230] PCI: CLS 64 bytes, default 64
[    6.995317] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    7.002709] software IO TLB: mapped [mem 0x000000007750b000-0x000000007b50b000] (64MB)
[    7.011950] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x171024fa93b, max_idle_ns: 440795253189 ns
[    7.023543] clocksource: Switched to clocksource tsc
[    7.046058] workingset: timestamp_bits=62 max_order=20 bucket_order=0
[    7.108024] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    7.117665] io scheduler kyber registered
[    7.125094] pcieport 0000:00:1c.0: PME: Signaling with IRQ 115
[    7.136563] pcieport 0000:00:1c.1: PME: Signaling with IRQ 116
[    7.147422] pcieport 0000:00:1c.2: PME: Signaling with IRQ 117
[    7.271072] thermal LNXTHERM:00: registered as thermal_zone0
[    7.277696] ACPI: thermal: Thermal Zone [TZ01] (50 C)
[    7.287283] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    7.295619] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    7.330016] 8086228A:00: ttyS1 at MMIO 0x91b20000 (irq = 39, base_baud = 2764800) is a 16550A
[    7.352779] 8086228A:01: ttyS2 at MMIO 0x91b1e000 (irq = 40, base_baud = 2764800) is a 16550A
[    7.380623] ahci 0000:00:13.0: version 3.0
[    7.388609] ahci 0000:00:13.0: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    7.397798] ahci 0000:00:13.0: flags: 64bit ncq ilck pm led clo only pio slum part deso sadm sds apst 
[    7.415926] scsi host0: ahci
[    7.423509] scsi host1: ahci
[    7.428125] ata1: SATA max UDMA/133 abar m2048@0x91b2f000 port 0x91b2f100 irq 118
[    7.436593] ata2: SATA max UDMA/133 abar m2048@0x91b2f000 port 0x91b2f180 irq 118
[    7.449363] libphy: Fixed MDIO Bus: probed
[    7.455665] e100: Intel(R) PRO/100 Network Driver
[    7.461042] e100: Copyright(c) 1999-2006 Intel Corporation
[    7.467457] e1000: Intel(R) PRO/1000 Network Driver
[    7.472996] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    7.479753] e1000e: Intel(R) PRO/1000 Network Driver
[    7.485387] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    7.492395] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[    7.499489] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[    7.531112] libphy: r8169: probed
[    7.537877] r8169 0000:03:00.0 eth0: RTL8168g/8111g, 00:e0:4c:68:00:37, XID 4c0, IRQ 119
[    7.547173] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    7.557375] usbcore: registered new interface driver asix
[    7.563630] usbcore: registered new interface driver ax88179_178a
[    7.570784] usbcore: registered new interface driver cdc_ether
[    7.577438] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    7.584947] ehci-pci: EHCI PCI platform driver
[    7.593178] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    7.599598] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    7.609982] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081509810
[    7.626378] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.16
[    7.635808] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.643997] usb usb1: Product: xHCI Host Controller
[    7.649584] usb usb1: Manufacturer: Linux 5.16.0-rc6-next-20211224+ xhci-hcd
[    7.657572] usb usb1: SerialNumber: 0000:00:14.0
[    7.668163] hub 1-0:1.0: USB hub found
[    7.672832] hub 1-0:1.0: 7 ports detected
[    7.696963] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    7.702969] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    7.711393] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    7.722151] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.16
[    7.731537] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.739703] usb usb2: Product: xHCI Host Controller
[    7.745256] usb usb2: Manufacturer: Linux 5.16.0-rc6-next-20211224+ xhci-hcd
[    7.753234] usb usb2: SerialNumber: 0000:00:14.0
[    7.763064] hub 2-0:1.0: USB hub found
[    7.764409] ata1: SATA link down (SStatus 4 SControl 300)
[    7.767664] hub 2-0:1.0: 6 ports detected
[    7.774487] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    7.794191] usbcore: registered new interface driver usb-storage
[    7.801298] usbcore: registered new interface driver usbserial_generic
[    7.808983] usbserial: USB Serial support registered for generic
[    7.815993] usbcore: registered new interface driver belkin_sa
[    7.822860] usbserial: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
[    7.833614] ata2.00: ATA-9: INTEL SSDSC2BW080A4, DC32, max UDMA/133
[    7.834639] usbcore: registered new interface driver pl2303
[    7.847431] ata2.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    7.849015] usbserial: USB Serial support registered for pl2303
[    7.862280] rtc_cmos 00:06: RTC can wake from S4
[    7.871798] rtc_cmos 00:06: registered as rtc0
[    7.877103] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram
[    7.885712] intel_pstate: Intel P-state driver initializing
[    7.900283] sdhci: Secure Digital Host Controller Interface driver
[    7.907646] ata2.00: Features: Dev-Sleep
[    7.909202] sdhci: Copyright(c) Pierre Ossman
[    7.918004] efifb: probing for efifb
[    7.922236] efifb: framebuffer at 0x80000000, using 8100k, total 8100k
[    7.929701] efifb: mode is 1920x1080x32, linelength=7680, pages=2025
[    7.937495] efifb: scrolling: redraw
[    7.941892] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    7.943079] mmc0: SDHCI controller on ACPI [INT33BB:00] using ADMA
[    7.956453] mmc1: SDHCI controller on ACPI [80860F14:00] using ADMA
[    7.963815] fbcon: Deferring console take-over
[    7.969021] fb0: EFI VGA frame buffer device
[    7.974017] hid: raw HID events driver (C) Jiri Kosina
[    7.979838] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[    7.986464] Initializing XFRM netlink socket
[    7.987373] ata2.00: configured for UDMA/133
[    7.992124] NET: Registered PF_PACKET protocol family
[    7.996949] ahci 0000:00:13.0: port does not support device sleep
[    8.002577] can: controller area network core
[    8.014481] NET: Registered PF_CAN protocol family
[    8.022560] microcode: sig=0x406c4, pf=0x1, revision=0x401
[    8.028839] microcode: Microcode Update Driver: v2.2.
[    8.028856] IPI shorthand broadcast: enabled
[    8.029311] scsi 1:0:0:0: Direct-Access     ATA      INTEL SSDSC2BW08 DC32 PQ: 0 ANSI: 5
[    8.034645] sched_clock: Marking stable (6595284900, 1439238512)->(8313536900, -279013488)
[    8.050681] sd 1:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    8.059002] registered taskstats version 1
[    8.066502] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    8.078269] sd 1:0:0:0: [sda] Write Protect is off
[    8.084378] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    8.090359] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    8.106633]  sda: sda1 sda2 sda3
[    8.110541] PM:   Magic number: 6:366:280
[    8.115369] tty tty17: hash matches
[    8.120871] PM: Image not found (code -22)
[    8.121591] sd 1:0:0:0: [sda] Attached SCSI disk
[    8.156236] random: fast init done
[    8.174383] usb 1-2: New USB device found, idVendor=8564, idProduct=1000, bcdDevice= 1.00
[    8.183948] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    8.192132] usb 1-2: Product: Mass Storage Device
[    8.197593] usb 1-2: Manufacturer: JetFlash
[    8.202537] usb 1-2: SerialNumber: I100W658
[    8.209685] mmc1: new HS200 MMC card at address 0001
[    8.217397] mmcblk1: mmc1:0001 MCG8GC 58.2 GiB 
[    8.224486] usb-storage 1-2:1.0: USB Mass Storage device detected
[    8.227687] mmc0: new ultra high speed SDR104 SDIO card at address 0001
[    8.240370] mmcblk1boot0: mmc1:0001 MCG8GC 4.00 MiB 
[    8.246046] scsi host2: usb-storage 1-2:1.0
[    8.254385] mmcblk1boot1: mmc1:0001 MCG8GC 4.00 MiB 
[    8.261904] mmcblk1gp0: mmc1:0001 MCG8GC 8.00 MiB 
[    8.270767] mmcblk1rpmb: mmc1:0001 MCG8GC 4.00 MiB, chardev (246:0)
[    8.385522] usb 1-3: new high-speed USB device number 3 using xhci_hcd
[    8.557212] usb 1-3: New USB device found, idVendor=12d1, idProduct=1573, bcdDevice= 2.28
[    8.566625] usb 1-3: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[    8.574783] usb 1-3: Product: HUAWEI Mobile
[    8.579623] usb 1-3: Manufacturer: HUAWEI Technology
[    8.585340] usb 1-3: SerialNumber: 0123456789ABCDEF
[    8.845422] usb 1-5: new full-speed USB device number 4 using xhci_hcd
[    8.978775] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: disabled.
[    8.988673] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[    9.000077] devtmpfs: mounted
[    9.020494] usb 1-5: New USB device found, idVendor=8087, idProduct=0a2a, bcdDevice= 0.01
[    9.029839] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    9.177574] usb 1-6: new high-speed USB device number 5 using xhci_hcd
[    9.271689] scsi 2:0:0:0: Direct-Access     JetFlash Transcend 8GB    8.07 PQ: 0 ANSI: 4
[    9.292594] sd 2:0:0:0: [sdb] 15261696 512-byte logical blocks: (7.81 GB/7.28 GiB)
[    9.294408] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    9.309036] sd 2:0:0:0: [sdb] Write Protect is off
[    9.314775] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[    9.322858] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    9.347969] usb 1-6: New USB device found, idVendor=0424, idProduct=4604, bcdDevice= 1.82
[    9.358050] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    9.366588]  sdb: sdb1
[    9.378878] hub 1-6:1.0: USB hub found
[    9.383530] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[    9.390495] hub 1-6:1.0: 5 ports detected
[    9.617919] ------------[ cut here ]------------
[    9.623548] DMA-API: xhci_hcd 0000:00:14.0: cacheline tracking EEXIST, overlapping mappings aren't supported
[    9.634777] WARNING: CPU: 0 PID: 11 at kernel/dma/debug.c:570 add_dma_entry+0x1e8/0x280
[    9.643980] Modules linked in:
[    9.647630] CPU: 0 PID: 11 Comm: kworker/0:1 Not tainted 5.16.0-rc6-next-20211224+ #6
[    9.656606] Workqueue: usb_hub_wq hub_event
[    9.661532] RIP: 0010:add_dma_entry+0x1e8/0x280
[    9.666806] Code: ff 0f 84 98 00 00 00 4c 8b 67 50 4d 85 e4 75 03 4c 8b 27 e8 2a cd 45 00 48 89 c6 4c 89 e2 48 c7 c7 10 3d 0a 82 e8 3a 6d 76 00 <0f> 0b 4d 85 ed 0f 85 38 10 77 00 8b 05 87 c3 2f 01 85 c0 0f 85 db
[    9.687997] RSP: 0000:ffffc900000879d8 EFLAGS: 00010286
[    9.693994] RAX: 0000000000000000 RBX: 00000000ffffffff RCX: 00000000ffff7fff
[    9.702080] RDX: 0000000000000000 RSI: 00000000ffffffea RDI: 00000000ffff7fff
[    9.710148] RBP: ffffc90000087a18 R08: ffff88817fef23e8 R09: 00000000ffff7fff
[    9.718203] R10: ffff88817b940000 R11: ffff88817b940000 R12: ffff8881011d35a0
[    9.726249] R13: ffff8881003b9280 R14: 000000000406d70a R15: 0000000000000206
[    9.734287] FS:  0000000000000000(0000) GS:ffff88817bc00000(0000) knlGS:0000000000000000
[    9.743394] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    9.749933] CR2: ffff88817ffff000 CR3: 0000000002211000 CR4: 00000000001006f0
[    9.757963] Call Trace:
[    9.760704]  <TASK>
[    9.763090]  debug_dma_map_page+0xe6/0x100
[    9.767713]  dma_map_page_attrs+0x71/0xb0
[    9.772243]  usb_hcd_map_urb_for_dma+0x3f8/0x530
[    9.777445]  xhci_map_urb_for_dma+0x144/0x160
[    9.782360]  ? __lock_acquire+0x4dc/0x9a0
[    9.786879]  usb_hcd_submit_urb+0x5f/0x2a0
[    9.791487]  usb_submit_urb+0x24f/0x690
[    9.795812]  ? lockdep_init_map_type+0x4c/0x230
[    9.800913]  usb_start_wait_urb+0x75/0x180
[    9.805520]  usb_control_msg+0xde/0x140
[    9.809853]  hub_ext_port_status+0x8a/0x110
[    9.814568]  port_event+0x7a/0x800
[    9.818407]  ? hub_event+0x1cb/0x450
[    9.822440]  ? _raw_spin_unlock_irq+0x23/0x40
[    9.827349]  hub_event+0x1d6/0x450
[    9.831188]  process_one_work+0x227/0x590
[    9.835707]  ? process_one_work+0x590/0x590
[    9.840420]  worker_thread+0x53/0x3c0
[    9.844550]  ? process_one_work+0x590/0x590
[    9.849262]  kthread+0xd3/0xf0
[    9.852683]  ? kthread_complete_and_exit+0x20/0x20
[    9.858075]  ret_from_fork+0x22/0x30
[    9.862109]  </TASK>
[    9.864557] irq event stamp: 9559
[    9.868294] hardirqs last  enabled at (9569): [<ffffffff810de37a>] __up_console_sem+0x6a/0x80
[    9.877875] hardirqs last disabled at (9584): [<ffffffff810de35f>] __up_console_sem+0x4f/0x80
[    9.887445] softirqs last  enabled at (9582): [<ffffffff81c0026d>] __do_softirq+0x26d/0x436
[    9.896819] softirqs last disabled at (9577): [<ffffffff810655ce>] irq_exit_rcu+0x9e/0xd0
[    9.906001] ---[ end trace 0000000000000000 ]---
[    9.911198] DMA-API: Mapped at:
[    9.914740]  debug_dma_map_page+0x56/0x100
[    9.919347]  dma_map_page_attrs+0x71/0xb0
[    9.923855]  usb_hcd_map_urb_for_dma+0x3f8/0x530
[    9.929053]  xhci_map_urb_for_dma+0x144/0x160
[    9.933959]  usb_hcd_submit_urb+0x5f/0x2a0
[   10.016007] Freeing unused kernel image (initmem) memory: 1104K
[   10.017461] usb 1-6.5: new high-speed USB device number 6 using xhci_hcd
[   10.023072] Write protecting the kernel read-only data: 18432k
[   10.049228] Freeing unused kernel image (text/rodata gap) memory: 2040K
[   10.058461] Freeing unused kernel image (rodata/data gap) memory: 280K
[   10.065918] Run /sbin/init as init process
[   10.070642]   with arguments:
[   10.074056]     /sbin/init
[   10.077177]   with environment:
[   10.080707]     HOME=/
[   10.083421]     TERM=linux
[   10.086524]     buildroot_hostname=bsw02
[   10.090978]     dmi_entry_point=0x7b558000
[   10.095622]     mac=00:e0:4c:68:00:37
[   10.139282] usb 1-6.5: New USB device found, idVendor=0424, idProduct=2530, bcdDevice= 1.16
[   10.150308] usb 1-6.5: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[   10.159232] usb 1-6.5: Product: Bridge device
[   10.366673] systemd[1]: systemd 249.7-1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS -OPENSSL +ACL +BLKID +CURL +ELFUTILS -FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP -LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[   10.417845] systemd[1]: Detected architecture x86-64.
[   10.446979] systemd[1]: Hostname set to <debian-i386-t>.
[   10.926438] systemd[1]: Queued start job for default target Graphical Interface.
[   10.938505] systemd[1]: Created slice Slice /system/getty.
[   10.963228] systemd[1]: Created slice Slice /system/modprobe.
[   10.991035] systemd[1]: Created slice Slice /system/serial-getty.
[   11.019085] systemd[1]: Created slice User and Session Slice.
[   11.046971] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[   11.079096] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   11.110366] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
[   11.123939] systemd[1]: Reached target Local Encrypted Volumes.
[   11.150319] systemd[1]: Reached target Remote File Systems.
[   11.173884] systemd[1]: Reached target Slice Units.
[   11.198587] systemd[1]: Reached target Local Verity Protected Volumes.
[   11.220360] systemd[1]: Listening on Syslog Socket.
[   11.245187] systemd[1]: Listening on fsck to fsckd communication Socket.
[   11.276405] systemd[1]: Listening on initctl Compatibility Named Pipe.
[   11.305710] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
[   11.315803] systemd[1]: Listening on Journal Socket (/dev/log).
[   11.343100] systemd[1]: Listening on Journal Socket.
[   11.366873] systemd[1]: Listening on udev Control Socket.
[   11.390339] systemd[1]: Listening on udev Kernel Socket.
[   11.414435] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[   11.428791] systemd[1]: Mounting POSIX Message Queue File System...
[   11.458187] systemd[1]: Mounting /sys/kernel/debug...
[   11.486766] systemd[1]: Mounting Kernel Trace File System...
[   11.516630] systemd[1]: Mounting Temporary Directory...
[   11.543618] systemd[1]: Starting Create List of Static Device Nodes...
[   11.579221] systemd[1]: Starting Load Kernel Module configfs...
[   11.607072] systemd[1]: Starting Load Kernel Module drm...
[   11.625969] systemd[1]: Starting Load Kernel Module fuse...
[   11.637850] ACPI: bus type drm_connector registered
[   11.644495] fuse: init (API version 7.36)
[   11.655797] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[   11.669798] systemd[1]: Starting File System Check on Root Device...
[   11.698587] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
[   11.713118] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
[   11.726142] systemd[1]: Starting Journal Service...
[   11.749156] systemd[1]: Starting Load Kernel Modules...
[   11.764131] systemd[1]: Starting Coldplug All udev Devices...
[   11.793673] systemd[1]: Mounted POSIX Message Queue File System.
[   11.822035] systemd[1]: Mounted /sys/kernel/debug.
[   11.826254] loop: module loaded
[   11.842902] i2c_dev: i2c /dev entries driver
[   11.849763] systemd[1]: Mounted Kernel Trace File System.
[   11.878046] systemd[1]: Mounted Temporary Directory.
[   11.908397] systemd[1]: Finished Create List of Static Device Nodes.
[   11.953299] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[   11.963376] systemd[1]: Finished Load Kernel Module configfs.
[   11.991771] systemd[1]: modprobe@drm.service: Deactivated successfully.
[   12.000971] systemd[1]: Finished Load Kernel Module drm.
[   12.027554] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[   12.036814] systemd[1]: Finished Load Kernel Module fuse.
[   12.063761] systemd[1]: Finished File System Check on Root Device.
[   12.090152] systemd[1]: Started Journal Service.
[   12.420502] EXT4-fs (sda2): re-mounted. Quota mode: disabled.
[   12.479175] systemd-journald[97]: Received client request to flush runtime journal.
[   13.232149] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[   13.258430] cherryview-pinctrl INT33FF:00: interrupt on unused interrupt line 0
[   13.266949] cherryview-pinctrl INT33FF:00: interrupt on unused interrupt line 0
[   13.275156] cherryview-pinctrl INT33FF:00: interrupt on unused interrupt line 0
[   13.283380] cherryview-pinctrl INT33FF:00: interrupt on unused interrupt line 0
[   13.291592] cherryview-pinctrl INT33FF:00: interrupt on unused interrupt line 0
[   13.299808] cherryview-pinctrl INT33FF:00: interrupt on unused interrupt line 0
[   13.308023] cherryview-pinctrl INT33FF:00: interrupt on unused interrupt line 0
[   13.316234] cherryview-pinctrl INT33FF:00: interrupt on unused interrupt line 0
[   13.324408] ACPI: button: Lid Switch [LID0]
[   13.324457] cherryview-pinctrl INT33FF:00: interrupt on unused interrupt line 0
[   13.337319] cherryview-pinctrl INT33FF:00: interrupt on unused interrupt line 0
[   13.353441] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[   13.401700] ACPI: AC: AC Adapter [ADP1] (on-line)
[   13.435141] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
[   13.473252] ACPI: button: Power Button [PWRB]
[   13.478422] acpi INTL9C60:00: matches with INTL9C60 (rev 2)
[   13.480741] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[   13.517457] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[   13.528932] acpi INTL9C60:00: request line base: 0x0000 end: 0x000f
[   13.569859] i8042: Warning: Keylock active
[   13.598297] ACPI: battery: Slot [BAT0] (battery present)
[   13.613560] ACPI: button: Sleep Button [SLPB]
[   13.627132] serio: i8042 KBD port at 0x60,0x64 irq 1
[   13.633490] ACPI: battery: Slot [BAT1] (battery absent)
[   13.674821] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[   13.686916] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
[   13.698560] serio: i8042 AUX port at 0x60,0x64 irq 12
[   13.732837] acpi INTL9C60:01: matches with INTL9C60 (rev 3)
[   13.781465] ACPI: button: Power Button [PWRF]
[   13.859818] acpi INTL9C60:01: request line base: 0x0010 end: 0x001f
[   14.368631] cherryview-pinctrl INT33FF:03: using interrupt line 0 for pin 81
[   14.379138] mmc2: SDHCI controller on ACPI [80860F14:01] using ADMA
[   14.429181] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[   14.453840] random: crng init done
[   14.642286] checking generic (80000000 7e9000) vs hw (90000000 1000000)
[   14.660932] checking generic (80000000 7e9000) vs hw (80000000 10000000)
[   14.676947] fb0: switching to i915 from EFI VGA
[   14.690185] i915 0000:00:02.0: vgaarb: deactivate vga console
[   14.884207] SSE version of gcm_enc/dec engaged.
[   14.954728] mmc2: new SD card at address b7d9
[   14.979047] mmcblk2: mmc2:b7d9 SD01G 983 MiB 
[   14.988197]  mmcblk2: p1
[   15.050719] r8169 0000:03:00.0: Direct firmware load for rtl_nic/rtl8168g-2.fw failed with error -2
[   15.069194] r8169 0000:03:00.0: Unable to load firmware rtl_nic/rtl8168g-2.fw (-2)
[   15.091272] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[   15.117053] Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
[   15.272114] r8169 0000:03:00.0 eth0: Link is Down
[   15.351637] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   15.414442] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[   15.510876] fbcon: i915drmfb (fb0) is primary device
[   15.510893] fbcon: Deferring console take-over
[   15.524547] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[   15.591177] cherryview-pinctrl INT33FF:00: using interrupt line 0 for pin 76
[   15.600843] cherryview-pinctrl INT33FF:03: using interrupt line 2 for pin 77
[   15.610014] cherryview-pinctrl INT33FF:02: using interrupt line 0 for pin 22
[   15.710667] i2c_hid_acpi i2c-ATML1000:00: unexpected HID descriptor bcdVersion (0xaa10)
[   15.719979] i2c_hid_acpi i2c-ATML1000:00: Failed to fetch the HID Descriptor
[   15.819884] iTCO_wdt iTCO_wdt.1.auto: Found a Braswell SoC TCO device (Version=3, TCOBASE=0x0460)
[   15.917373] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)
[   16.000979] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[   16.022470] intel_rapl_common: Found RAPL domain package
[   16.028645] intel_rapl_common: Found RAPL domain core
[   16.281144] atkbd serio0: Failed to enable keyboard on isa0060/serio0
[   16.291690] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[   16.344492] Adding 4194300k swap on /dev/sda3.  Priority:-2 extents:1 across:4194300k SS
[   17.859181] r8169 0000:03:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   18.319081] fbcon: Taking over console
[   18.334693] Console: switching to colour frame buffer device 240x67