Re: [PATCH v1 1/6] dt-bindings: gpio: realtek-otto: Add rtl9300 compatible

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 09/04/2022 21:55, Sander Vanheule wrote:
> Add the "realtek,rlt9300-gpio", "realtek,otto-gpio" compatible for GPIO
> nodes on the RTL930x SoC series. This SoC requires an extra register
> range, defining the interrupt CPU mapping registers.
> 
> Signed-off-by: Sander Vanheule <sander@svanheule.net>
> ---
>  .../bindings/gpio/realtek,otto-gpio.yaml      | 33 +++++++++++++++++--
>  1 file changed, 31 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml b/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml
> index 100f20cebd76..3c511e9af377 100644
> --- a/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml
> +++ b/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml
> @@ -28,10 +28,10 @@ properties:
>        - enum:
>            - realtek,rtl8380-gpio
>            - realtek,rtl8390-gpio
> +          - realtek,rtl9300-gpio
>        - const: realtek,otto-gpio
>  
> -  reg:
> -    maxItems: 1
> +  reg: true
>  
>    "#gpio-cells":
>      const: 2
> @@ -50,6 +50,23 @@ properties:
>    interrupts:
>      maxItems: 1
>  
> +if:

You could put it under allOf:, so if you ever need to extend it, you
don't mess with the indentation, but it's fine as it is.


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof