Re: [PATCH v2 2/2] dt-bindings: pinctrl: qcom: consolidate functions to match with driver

[Tengfei Fan <quic_tengfan@quicinc.com>]

On 1/30/2024 12:38 PM, Bjorn Andersson wrote:
> On Mon, Jan 29, 2024 at 05:25:12PM +0800, Tengfei Fan wrote:
>> Consolidate functions to match with SM4450 pinctrl driver, because
>> consolidate functions are being used in SM4450 pinctrl driver.
> 
> Please make your commit message start by describing the problem you're
> solving, then provide a technical description of the change.
> 
> The problem statement can mention that you consolidated the functions in
> the driver, but did not update the binding before it was merged. And for
> a DeviceTree binding, it should document why this
> non-backwards-compatible change is okay (such as the initial commit is
> broken).
> 
> Regards,
> Bjorn

Thank you for the comments, I will do new commit message as you 
suggested that commit message start by describing the problem, then 
provide a technical description of the chagne.

> 
>>
>> Fixes: 7bf8b78f86db ("dt-bindings: pinctrl: qcom: Add SM4450 pinctrl")
>> Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
>> ---
>>   .../bindings/pinctrl/qcom,sm4450-tlmm.yaml    | 51 +++++++------------
>>   1 file changed, 17 insertions(+), 34 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml
>> index bb675c8ec220..4109104de054 100644
>> --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml
>> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml
>> @@ -72,40 +72,23 @@ $defs:
>>           description:
>>             Specify the alternative function to be configured for the specified
>>             pins.
>> -        enum: [ gpio, atest_char, atest_char0, atest_char1, atest_char2,
>> -                atest_char3, atest_usb0, atest_usb00, atest_usb01, atest_usb02,
>> -                atest_usb03, audio_ref, cam_mclk, cci_async, cci_i2c,
>> -                cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
>> -                cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3, coex_uart1, cri_trng,
>> -                cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
>> -                dp0_hot, gcc_gp1, gcc_gp2, gcc_gp3, host2wlan_sol, ibi_i3c,
>> -                jitter_bist, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2,
>> -                mdp_vsync3, mi2s0_data0, mi2s0_data1, mi2s0_sck, mi2s0_ws,
>> -                mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, mi2s_mclk0,
>> -                mi2s_mclk1, nav_gpio0, nav_gpio1, nav_gpio2, pcie0_clk,
>> -                phase_flag0, phase_flag1, phase_flag10, phase_flag11,
>> -                phase_flag12, phase_flag13, phase_flag14, phase_flag15,
>> -                phase_flag16, phase_flag17, phase_flag18, phase_flag19,
>> -                phase_flag2, phase_flag20, phase_flag21, phase_flag22,
>> -                phase_flag23, phase_flag24, phase_flag25, phase_flag26,
>> -                phase_flag27, phase_flag28, phase_flag29, phase_flag3,
>> -                phase_flag30, phase_flag31, phase_flag4, phase_flag5,
>> -                phase_flag6, phase_flag7, phase_flag8, phase_flag9,
>> -                pll_bist, pll_clk, prng_rosc0, prng_rosc1, prng_rosc2,
>> -                prng_rosc3, qdss_cti, qdss_gpio, qdss_gpio0, qdss_gpio1,
>> -                qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14,
>> -                qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5,
>> -                qdss_gpio6, qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink0_enable,
>> -                qlink0_request, qlink0_wmss, qlink1_enable, qlink1_request,
>> -                qlink1_wmss, qlink2_enable, qlink2_request, qlink2_wmss,
>> -                qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4, qup0_se5,
>> -                qup0_se6, qup0_se7, qup1_se0, qup1_se1, qup1_se2, qup1_se3,
>> -                qup1_se4, qup1_se5, qup1_se6, sd_write, tb_trig, tgu_ch0,
>> -                tgu_ch1, tgu_ch2, tgu_ch3, tmess_prng0, tmess_prng1,
>> -                tmess_prng2, tmess_prng3, tsense_pwm1, tsense_pwm2, uim0_clk,
>> -                uim0_data, uim0_present, uim0_reset, uim1_clk, uim1_data,
>> -                uim1_present, uim1_reset, usb0_hs, usb0_phy, vfr_0, vfr_1,
>> -                vsense_trigger ]
>> +        enum: [ gpio, atest_char, atest_usb0, audio_ref_clk, cam_mclk,
>> +                cci_async_in0, cci_i2c, cci, cmu_rng, coex_uart1_rx,
>> +                coex_uart1_tx, cri_trng, dbg_out_clk, ddr_bist,
>> +                ddr_pxi0_test, ddr_pxi1_test, gcc_gp1_clk, gcc_gp2_clk,
>> +                gcc_gp3_clk, host2wlan_sol, ibi_i3c_qup0, ibi_i3c_qup1,
>> +                jitter_bist_ref, mdp_vsync0_out, mdp_vsync1_out,
>> +                mdp_vsync2_out, mdp_vsync3_out, mdp_vsync, nav,
>> +                pcie0_clk_req, phase_flag, pll_bist_sync, pll_clk_aux,
>> +                prng_rosc, qdss_cti_trig0, qdss_cti_trig1, qdss_gpio,
>> +                qlink0_enable, qlink0_request, qlink0_wmss_reset,
>> +                qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4,
>> +                qup1_se0, qup1_se1, qup1_se2, qup1_se2_l2, qup1_se3,
>> +                qup1_se4, sd_write_protect, tb_trig_sdc1, tb_trig_sdc2,
>> +                tgu_ch0_trigout, tgu_ch1_trigout, tgu_ch2_trigout,
>> +                tgu_ch3_trigout, tmess_prng, tsense_pwm1_out,
>> +                tsense_pwm2_out, uim0, uim1, usb0_hs_ac, usb0_phy_ps,
>> +                vfr_0_mira, vfr_0_mirb, vfr_1, vsense_trigger_mirnat ]
>>   
>>           required:
>>             - pins
>> -- 
>> 2.17.1
>>

-- 
Thx and BRs,
Tengfei Fan