Re: [PATCH 08/11] MIPS: mobileye: eyeq5: add OLB syscon node

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 10/04/2024 19:12, Théo Lebrun wrote:
> The OLB ("Other Logic Block") is a syscon region hosting clock, reset
> and pin controllers. It contains registers such as I2C speed mode that
> need to be accessible by other nodes.
> 
> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
> ---
>  arch/mips/boot/dts/mobileye/eyeq5.dtsi | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/arch/mips/boot/dts/mobileye/eyeq5.dtsi b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
> index 6cc5980e2fa1..e82d2a57f6da 100644
> --- a/arch/mips/boot/dts/mobileye/eyeq5.dtsi
> +++ b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
> @@ -100,6 +100,14 @@ uart2: serial@a00000 {
>  			clock-names = "uartclk", "apb_pclk";
>  		};
>  
> +		olb: system-controller@e00000 {
> +			compatible = "mobileye,eyeq5-olb", "syscon", "simple-mfd";
> +			reg = <0 0xe00000 0x0 0x400>;
> +			ranges = <0x0 0x0 0xe00000 0x400>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;

Do not add incomplete node. ranges, address/size-cells are incorrect in
this context and you will have warnings.

Add complete node, so these properties make sense.

Best regards,
Krzysztof