Re: [PATCH v7 2/3] dt-bindings: pinctrl: Document nuvoton ma35d1 pin control

[Jacky Huang <ychuang570808@gmail.com>]

Dear Rob,

Thanks for your review.


On 2024/4/10 上午 12:29, Rob Herring wrote:
> On Tue, Apr 09, 2024 at 09:56:36AM +0000, Jacky Huang wrote:
>> From: Jacky Huang <ychuang3@nuvoton.com>
>>
>> Add documentation to describe nuvoton ma35d1 pin control and GPIO.
>>
>> Signed-off-by: Jacky Huang <ychuang3@nuvoton.com>
>> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> ---
>>   .../pinctrl/nuvoton,ma35d1-pinctrl.yaml       | 163 ++++++++++++++++++
>>   1 file changed, 163 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/pinctrl/nuvoton,ma35d1-pinctrl.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/pinctrl/nuvoton,ma35d1-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/nuvoton,ma35d1-pinctrl.yaml
>> new file mode 100644
>> index 000000000000..8b9ec263213f
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pinctrl/nuvoton,ma35d1-pinctrl.yaml
>> @@ -0,0 +1,163 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/pinctrl/nuvoton,ma35d1-pinctrl.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Nuvoton MA35D1 pin control and GPIO
>> +
>> +maintainers:
>> +  - Shan-Chun Hung <schung@nuvoton.com>
>> +  - Jacky Huang <ychuang3@nuvoton.com>
>> +
>> +allOf:
>> +  - $ref: pinctrl.yaml#
>> +
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - nuvoton,ma35d1-pinctrl
>> +
>> +  '#address-cells':
>> +    const: 1
>> +
>> +  '#size-cells':
>> +    const: 1
>> +
>> +  nuvoton,sys:
>> +    $ref: /schemas/types.yaml#/definitions/phandle
>> +    description:
>> +      phandle of the system-management node.
> If these are the *only* registers to access the pinctrl functions, then
> this binding should be a child node of the system-management node and
> then you don't need this property.
>
> And if the registers for pinctrl are a defined range, you should add a
> 'reg' property (even though Linux and regmap don't use it).

I will add a 'reg' property for this.

>> +
>> +  ranges: true
> This property makes no sense with the binding as-is. You don't have
> any address to translate. Maybe with the above changes it will.

I will fix the
      ranges = <0 0x40040000 0xc00>;
as
      reg = <0 0x40040000 0xc00>;
      ranges;
>> +
>> +patternProperties:
>> +  "^gpio@[0-9a-f]+$":
>> +    type: object
>> +    additionalProperties: false
>> +    properties:
>> +      gpio-controller: true
>> +
>> +      '#gpio-cells':
>> +        const: 2
>> +
>> +      reg:
>> +        maxItems: 1
>> +
>> +      clocks:
>> +        maxItems: 1
>> +
>> +      interrupt-controller: true
>> +
>> +      '#interrupt-cells':
>> +        const: 2
>> +
>> +      interrupts:
>> +        description:
>> +          The interrupt outputs to sysirq.
>> +        maxItems: 1
>> +
>> +    required:
>> +      - gpio-controller
>> +      - '#gpio-cells'
>> +      - reg
>> +      - clocks
>> +      - interrupt-controller
>> +      - '#interrupt-cells'
>> +      - interrupts
>> +
>> +  "^pin-[a-z0-9]+$":
>> +    type: object
>> +    description:
>> +      A pinctrl node should contain at least one subnodes representing the
>> +      pinctrl groups available on the machine. Each subnode will list the
>> +      pins it needs, and how they should be configured, with regard to muxer
>> +      configuration, pullups, drive strength, input enable/disable and input
>> +      schmitt.
>> +
>> +    $ref: pincfg-node.yaml#
>> +
>> +    properties:
>> +      power-source:
>> +        description: |
>> +          Valid arguments are described as below:
>> +          0: power supply of 1.8V
>> +          1: power supply of 3.3V
>> +        enum: [0, 1]
>> +
>> +      drive-strength-microamp:
>> +        oneOf:
>> +          - enum: [ 2900, 4400, 5800, 7300, 8600, 10100, 11500, 13000 ]
>> +            description: 1.8V I/O driving strength
>> +          - enum: [ 17100, 25600, 34100, 42800, 48000, 56000, 77000, 82000 ]
>> +            description: 3.3V I/O driving strength
>> +
>> +    unevaluatedProperties: false
> In the indented cases, it's preferred to put this before 'properties'.
>

I will fix it.

>> +
>> +  "-grp$":
>> +    type: object
>> +    description:
>> +      Pinctrl node's client devices use subnodes for desired pin configuration.
>> +      Client device subnodes use below standard properties.
> Missing $ref to common properties and 'unevaluatedProperties'.

I will fix it.

>> +    properties:
>> +      nuvoton,pins:
>> +        description:
>> +          Each entry consists of 4 parameters and represents the mux and config
>> +          setting for one pin.
>> +        $ref: /schemas/types.yaml#/definitions/uint32-matrix
>> +        minItems: 1
>> +        items:
>> +          items:
>> +            - minimum: 0
>> +              maximum: 13
>> +              description:
>> +                Pin bank.
>> +            - minimum: 0
>> +              maximum: 15
>> +              description:
>> +                Pin bank index.
>> +            - minimum: 0
>> +              maximum: 15
>> +              description:
>> +                Mux 0 means GPIO and mux 1 to 15 means the specific device function.
>> +
>> +required:
>> +  - compatible
>> +  - nuvoton,sys
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
>> +    #include <dt-bindings/gpio/gpio.h>
>> +    #include <dt-bindings/clock/nuvoton,ma35d1-clk.h>
>> +
>> +    pinctrl@40040000 {
>> +        compatible = "nuvoton,ma35d1-pinctrl";
>> +        #address-cells = <1>;
>> +        #size-cells = <1>;
>> +        nuvoton,sys = <&sys>;
>> +        ranges = <0 0x40040000 0xc00>;
>> +
>> +        gpio@0 {
>> +            reg = <0x0 0x40>;
>> +            interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
>> +            clocks = <&clk GPA_GATE>;
>> +            gpio-controller;
>> +            #gpio-cells = <2>;
>> +            interrupt-controller;
>> +            #interrupt-cells = <2>;
>> +        };
>> +
>> +        uart-grp {
>> +            uart11-pins {
> This is not what the schema says.
>> +                nuvoton,pins = <11 0 2>,
>> +                               <11 1 2>,
>> +                               <11 2 2>,
>> +                               <11 3 2>;
>> +                bias-disable;
>> +                power-source = <1>;
>> +            };
>> +        };
> Include a pin-* node in the example.

This is my mistake. "pin-*" was the naming convention used in previous 
versions, which
has now been changed to "-pins". Additionally, its hierarchy should be 
under "-grp".
I will make corrections for these two issues.


>> +    };
>> -- 
>> 2.34.1
>>

Best Regards,
Jacky Huang