From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Albert Duane Lawson" Subject: Node Crashes Date: Fri, 19 Sep 2003 18:48:54 -0700 Sender: linux-hams-owner@vger.kernel.org Message-ID: <001901c37f19$59ff2830$0200a8c0@albertla> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: List-Id: Content-Type: text/plain; charset="us-ascii" To: linux-hams@vger.kernel.org Hi Gang, Experiencing problems with my ax25 node crashes after connecting to it. The log shows node received a SIGTERM every time this happens. Here's the breakdown on the setup: New Install of Red Hat 7.3 using the 2.4.18-3 kernel Intel 233 MHz CPU on an Intel Board 256 MB SDRam ax25-apps-0.0.6 ax25-tools-0.0.8 libax25-0.0.11 node-0.3.2 (also have tried awznode with same results) These were not RPM packages, they were compiled by myself on the machine after Red Hat was installed. When I make a netrom connect to the node via ax25d, the first command issued will sometimes cause a disconnect. The resulting message in the log is SIGTERM. I do not notice this when using an ax25 connect or when using telnet into the node. Can anyone suggest where to look to see what's causing this...??? Better yet, does anyone know what kind of problem this is and how to fix it...??? 73's Albert/WB7AWL