From mboxrd@z Thu Jan 1 00:00:00 1970 From: pa3gcu Subject: Re: soundmodem/ax25 newbie questions. Date: Mon, 31 Mar 2003 19:57:49 +0000 Sender: linux-hams-owner@vger.kernel.org Message-ID: <03033119574904.04308@unix.pa3gcu> References: <200303302118.50687.linux-hams@amayzing.co.nz> Reply-To: pa3gcu@zeelandnet.nl Mime-Version: 1.0 Content-Transfer-Encoding: 7BIT Return-path: In-Reply-To: <200303302118.50687.linux-hams@amayzing.co.nz> List-Id: Content-Type: text/plain; charset="us-ascii" To: Aaron May , Linux Hams On Sunday 30 March 2003 09:18, Aaron May wrote: > I have just finished trying to install the soundmodem kernel drivers, only > to find it doesn't like my sound card. The sound card is an on-board VIA > chipset, and in the BIOS it has an option to enable the legacy > sound-blaster on 0x220, irq5 dma 1, however when I try to ifconfig it up, > the system log reports no sb at that location. So my sound card will not > work? (further details at www.amayzing.co.nz/aaron/?page=045 if you are > interested.) > > So I moved on to the soundmodem usermode (?) version. I have happily got it > working to the point that text scrolls down the screen in kiss mode, > proving that my cables work. > > When I try it in mkiss mode, it results in an error: > > sm[1187]: ioctl: TIOCSETD: Invalid argument (22). I did not reply to this one because i dont use a soundcard at all for packet, however considering i've seen no replys i will tell you what, "ioctl: TIOCSETD" normally means, it means that at the time you gave the command no mkiss was found in your kernel or no mkiss module was loaded. I hope i am correct here as i dont know what "Invalid argument (22)" is, i did a quick search in the kernel source but it showed nothing. If your mkiss support is in module form then you need to have the following in your /etc/modules.conf file. alias tty-ldisc-5 mkiss If i am completely wrong please accept my humble appols... > I'm unsure if it means anything, but the line written as I come out of > soundmodemconfig says: "selection: cfg: - chan: -" > > I more suspect that ax25 needs some more configuration? I haven't found any > doco/howto that makes sense to me about mkiss (I really am a newbie). > > Also If someone could point me at a simple packet terminal program? > > Any help would be appreciated. > Cheers, Aaron ZL3UAR. -- Regards Richard pa3gcu@zeelandnet.nl http://people.zeelandnet.nl/pa3gcu/