From mboxrd@z Thu Jan 1 00:00:00 1970 From: Alex V Flinsch Subject: Re: gMFSK/hamlib/parport Date: Wed, 18 Feb 2004 18:32:15 -0500 Sender: linux-hams-owner@vger.kernel.org Message-ID: <1077147135.6923.8.camel@homer.linux1.lan> References: <20040218152745.GD16991@strauss.udel.edu> Reply-To: avflinsch@att.net Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20040218152745.GD16991@strauss.udel.edu> List-Id: Content-Type: text/plain; charset="us-ascii" To: Linux Hams On Wed, 2004-02-18 at 10:27, Mike Markowski wrote: > Hi all, > > A couple questions about the excellent gMFSK 0.6beta2: > Execllent? I consider it to be a step above excellent! > > Bug report (but maybe in hamlib): > - I'm using an ICOM 706 MkIIg with hamlib on ttyS0 and > PTT to "none" in gMFSK just for the sake of seeing how > gMFSK uses hamlib. When I rotate the rig's tuning knob, > gMFSK works for a bit nicely updating the spectrum freqs, > but then I get a "Protocol error" and hamlib is disabled. > I assume the data out of the rig is changing too rapidly > for hamlib to capture it? Or maybe gMFSK is trying to > reread the data too frequently? > I just tried this on my system (Yaesu FT100,gMFSK-0.6beta2, hamlib-1.2.0) and this does not occur, if there is a problem, it might be in the IC-706 implementation in hamlib, what version of hamlib are you using? BTW I have only had one problem with gMFSK, and that has been happening for quite sometime (I think it started around version 0.5). Sometimes (that's the killer) the program will lock up when switching modes. Has anyone else had that problem? -- Alex / AB2RC Yaesu FT100 software for Linux http://www.qsl.net/kc2ivl Why do they call Radio "Wireless", between my shack and antennas I must have over 1500 feet of wire!