From mboxrd@z Thu Jan 1 00:00:00 1970 From: Christof Bodner Subject: Ubuntu 8.10 and AX25 Date: Sun, 05 Oct 2008 19:34:14 +0200 Message-ID: <1223228054.9867.13.camel@rosi> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: Sender: linux-hams-owner@vger.kernel.org List-ID: Content-Type: text/plain; charset="us-ascii" To: linux-hams@vger.kernel.org Hi! I have a SignaLink USB device and it's working fine, except AX25 in Linux (mhm, so it's not really working fine, isn't it?) If I start it with sudo mdprobe mkiss sudo soundmodem -v 5 I get --- sm[10003]: mkiss: ifname ax0 mtu 256 hwaddr OE8BCK-1 ipaddr 10.0.0.1 netmask 255.255.255.0 broadcast 10.0.0.255 sm[10003]: audio: starting "/dev/dsp2" sm[10003]: audio: sample rate 9600 input fragsz 256 numfrags 512 output fragsz 256 numfrags 820 sm[10003]: unknown kiss packet: 0x80 0xa2 sm[10003]: unknown kiss packet: 0x20 0xa2 Tx: fm OE8BCK-1 to QST-0 UI pid=CC ... --- Then a lot of Tx frames are sent (would be sent if I would switch in TX) Does anybody know hoe to turn it off at Ubuntu 8.10? And then, exactly ONE RX frame is captured, e.g. Rx: fm OE1UHA-9 to TX0R18-0 via OE1XQR-0,WIDE2-0 UIv pid=F0 `,.Xmz3>/ON THE ROAD dmesg gives the output: [ 4763.523335] usb 5-2.1.4: configuration #1 chosen from 1 choice [ 4763.525286] input: Burr-Brown from TI USB Audio CODEC as /class/input/input6 [ 4763.527643] input,hidraw2: USB HID v1.00 Device [Burr-Brown from TI USB Audio CODEC ] on usb-0000:01:09.2-2.1.4 [ 4764.858704] usbcore: registered new interface driver snd-usb-audio [ 4834.952618] NET: Registered protocol family 3 [ 4835.007632] mkiss: AX.25 Multikiss, Hans Albas PE1AYX [ 4850.084131] mkiss: ax0: crc mode is auto. [ 4850.160087] mkiss: ax0: Trying crc-smack [ 4850.316183] mkiss: ax0: Trying crc-flexnet Some other correct RX-frames can be received by restarting soundmodem. So why do I have to restart soundmodem given this result? --- sm[10313]: mkiss: ifname ax0 mtu 256 hwaddr OE8BCK-1 ipaddr 10.0.0.1 netmask 255.255.255.0 broadcast 10.0.0.255 sm[10313]: audio: starting "/dev/dsp2" sm[10313]: audio: sample rate 9600 input fragsz 256 numfrags 512 output fragsz 256 numfrags 820 sm[10313]: unknown kiss packet: 0x80 0xa2 sm[10313]: unknown kiss packet: 0x20 0xa2 Tx: fm OE8BCK-1 to QST-0 UI pid=CC ... --- It's a little bit annoying to restart soundmodem each minute, so I need your tips. 73 de christof, oe8bck -- (0-0) ---------oOO--(_)--OOo----------------------------------------------- Christof Bodner Linux - Life is too short for reboots - First they ignore you. Then they laugh at you. Then they fight you(*). Then you win. -- Ghandi --------------------------------------------------------------------- email: mailto:oe8bck@gmx.net --------------------------------------------------------------------- GnuPG public key: 0xB15DA60F (http://wwwkeys.eu.pgp.net) Fingerprint 5222 4DEA 773A 60B3 22F9 D244 15EF 6645 B15D A60F ---------------------------------------------------------------------