RedHat 7.3 and AX25

RedHat 7.3 and AX25

[Stewart Wilkinson]

Hi,

I seem to have a problem using kissattach with the 2.4.18-3 kernel. I have
rebuilt a kernel with MKISS support on (ie: CONFIG_MKISS=y in .config),
yet when I try to run kissattach I get:

kissattach: Error setting line discipline: TIOCSETD: Invalid argument
Are you sure you have enabled MKISS support in the kernel
or, if you made it a module, that the module is loaded?

Any Idea's ??

-- 
Stewart (G0LGS)
g0lgs@gb7lgs.co.uk

Re: RedHat 7.3 and AX25

[Roger Harris]

Hi Stewart

I had exactly the same problem. It seemed to ignore the request to compile MKISS into the kernel.

When I made it a module and loaded it manually, this solved the problem. 

Perhaps someone knows a bit more and can say whether this is a known bug, whether there is a fix, or whether we are both doing something wrong.

Thanks

Roger

At 02:03 07/09/02, you wrote:
>Hi,
>
>I seem to have a problem using kissattach with the 2.4.18-3 kernel. I have
>rebuilt a kernel with MKISS support on (ie: CONFIG_MKISS=y in .config),
>yet when I try to run kissattach I get:
>
>kissattach: Error setting line discipline: TIOCSETD: Invalid argument
>Are you sure you have enabled MKISS support in the kernel
>or, if you made it a module, that the module is loaded?
>
>Any Idea's ??
>
>-- 
>Stewart (G0LGS)
>g0lgs@gb7lgs.co.uk

Re: RedHat 7.3 and AX25

[Shane Deering]

On Saturday 07 September 2002 16:35, Roger Harris wrote:
> Hi Stewart
>
> I had exactly the same problem. It seemed to ignore the request to compile
> MKISS into the kernel.
>
> When I made it a module and loaded it manually, this solved the problem.
>
> Perhaps someone knows a bit more and can say whether this is a known bug,
> whether there is a fix, or whether we are both doing something wrong.

I've noticed with Redhat 2.4.18 kernel source that the config file has-
CONFIG_HAMRADIO=m
I would have thought that it should be either y or n and is just there to say 
whether to skip over the ax25 stuff or not. It looks odd with "make xconfig" 
and I'm sure I had similar problems until I noticed it and changed it to y.


-- 
Shane Deering   vk3bvp@qsl.net 	vk3bvp@vk3bvp.#sev.vic.aus.oc
http://www.qsl.net/vk3bvp/
Sent with KMail v1.4.1 on Sat Sep  7 19:33:42 EST 2002

Re: RedHat 7.3 and AX25

[M Taylor]

On Sat, Sep 07, 2002 at 01:03:43AM +0000, Stewart Wilkinson wrote:
> Hi,
> 
> I seem to have a problem using kissattach with the 2.4.18-3 kernel. I have
> rebuilt a kernel with MKISS support on (ie: CONFIG_MKISS=y in .config),
> yet when I try to run kissattach I get:
> 
> kissattach: Error setting line discipline: TIOCSETD: Invalid argument
> Are you sure you have enabled MKISS support in the kernel
> or, if you made it a module, that the module is loaded?
> 
> Any Idea's ??

This won't work well without AX.25 also being in the kernel. BUT it is 
much much better to use KISS as a module (CONFIG_MKISS=m) instead.

mv .config .config.old
sed 's/CONFIG_MKISS=y/CONFIG_MKISS=m/' <.config.old >.config
make modules
make modules-install
make bzImage (only needed to rebuild kernel without mkiss in it)
...whatever steps you use to install new kernel 
...and update MBR (i.e. run lilo)

reboot

depmod -a

/sbin/modprobe ax25
/sbin/modprobe mkiss
kissattach ...

I would recommend building a kernel from generic 2.4.19 sources 
(www.us.kernel.org) rather than RedHat's kernel source rpm unless you need to 
use RedHat's patches for some non-standard reason. 2.4.19 has some fixes
for amateur radio.

I hope that helps,
-ve1mct

Option in kernel compilation

[Vivi Kusumo]

Hi all,

I have problem to choose <module> during make xconfig
# cd /usr/src/linux-2.4.19
# make xconfig
--- Amateur Radio support
<*>y  <>-  <>n   Amateur Radio support
--- Packet Radio protocols
<*>y  <>m  <>n   Amateur Radio AX.25 Level 2 protocol
--- AX.25 network device drivers
<>y  <*>m   <>n  Soundcard modem driver
<*>y  <>-  <>n  soundmodem support for Soundblaster
and compatible 
cards
 <>y  <>-  <*>n  soundmodem support for WSS and
Crystal cards
<*>y  <>-  <>n  soundmodem support for 1200 baud AFSK
modulation
 <>y  <>-  <*>n  soundmodem support for 2400 baud AFSK
modulation (7.3728MHz crystal)
 <>y  <>-  <*>n  soundmodem support for 2400 baud AFSK
modulation (8MHz crystal)
 <>y  <>-  <*>n  soundmodem support for 2666 baud AFSK
modulation
 <>y  <>-  <*>n  soundmodem support for 4800 baud
HAPN-1 modulation
 <>y  <>-  <*>n  soundmodem support for 4800 baud PSK
modulation
 <>y  <>-  <*>n  soundmodem support for 9600 baud FSK
G3RUH modulation

I can not choose/click module for "soundmodem support
for Soundblaster and compatible cards" and "soundmodem
support for 1200 baud AFSK modulation". I can only
click yes or no, I don't know why?

Thanks for any help.

Vivi 


__________________________________________________
Do You Yahoo!?
Yahoo! Finance - Get real-time stock quotes
http://finance.yahoo.com

Re: Option in kernel compilation

[Hamish Moffatt]

On Mon, Sep 09, 2002 at 06:16:04AM -0700, Vivi Kusumo wrote:
> I can not choose/click module for "soundmodem support
> for Soundblaster and compatible cards" and "soundmodem
> support for 1200 baud AFSK modulation". I can only
> click yes or no, I don't know why?

I think that is normal. You choose a module for the whole soundmodem
driver then choose what sound cards that module will support.

Hamish
-- 
Hamish Moffatt VK3SB <hamish@debian.org> <hamish@cloud.net.au>