From mboxrd@z Thu Jan 1 00:00:00 1970 From: EB3CZS Xavier Crehueras Subject: Re: Compaq Presario 901AT / RedHat 8.0 hiccup Date: Tue, 28 Jan 2003 11:19:11 +0100 Sender: linux-hams-owner@vger.kernel.org Message-ID: <20030128111911.1d1b043e.eb3czs@qsl.net> References: <000b01c2c6b0$d5450810$94dfadcb@Cpq> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <000b01c2c6b0$d5450810$94dfadcb@Cpq> List-Id: Content-Type: text/plain; charset="us-ascii" To: Dexy Cc: linux-hams@vger.kernel.org Hello all, I just installed Debian GNU/Linux 3.0 woody on a Compaq Presario 920 a few days ago. I had to install it with a 2.2 kernel because the 2.4 kernel kept locking on boot with a CPU exception. Once installed, I compiled a kernel 2.4.19 and it worked with the exception of pcmcia. Loading pcmcia cardmgr crashed the kernel with a CPU exception. Hope this helps. 73s de Xavi On Tue, 28 Jan 2003 22:35:47 +1300 "Dexy" wrote: > Greetings, all > > I tried Mandrake 6.5 on this machine, but couldn't get the screen to set > up. Someone suggested newer linux, so I downloaded RH8 and made a bootable > CD install set. The Disk 1 boots fine, but it only gets as far as the > partition check (bear with me, this was written down from the screen): > > Uniform Multi-Platform E-IDE driver Revision: 6.31 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > ALI15X3: IDE controller on PCI bus 00 dev 80 > PCI: No IRQ known for interrupt pin A of device 00:10.0. Please try using > pci=biosirq > ALI15X3: chipset revision 196 > ALI15X3: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0x8080-0x8087, BIOS settings: hda:DMA, hdb:pio > ide1: BM-DMA at 0x8088-0x808f, BIOS settings: hdc:pio, hdd:pio > hda: FUJITSU MHR2020AT, ATA DISK drive > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > hdc: Compaq CRN-8245B, ATAPI CD/DVD-ROM drive > ide0 at 0x1f0-0x1f7, 0x3f6 on irq 14 > ide1 at 0x170-0x177, 0x376 on irq 15 > hda: 39070080 sectors (20004MB) w/2048KiB Cache, CHS=2432/255/63, (U)DMA > hdc: ATAPI 24x CD-ROM drive, 128KB Cache > Uniform CD-ROM driver Revision: 3.12 > ide-floppy driver 0.99.newide > Partition check: > hda:spurious 8259A interrupt: IRQ7 > > (there is a pause at hda: then spurious... comes up) > At this point the machine locks up, with the drive light lit. > > Using pci=biosirq (see line 4 above) makes no difference. What is device > 00:10.0? > > The partition it is checking is the default 18GB WinXP. Is it actually > checking this? I'd have thought it would be hda1, but it's only showing as > hda. I've left the machine going for 1/2-hour, it surely would have checked > it by then if it was going to. > > IRQ7 is usually something to do with the // port, no? Then why is it > happening during boot? There's a facility do disable the port during boot, > but this makes no difference, nor does changing from Bi-dir to EPP to > EPP/ECP. > > Incidentally, the // port is the reason I'm trying linux - XP trashes it > as far as use for "Push to talk" for an Amateur Radio transciever, and > there's no Com port I can use :-(. It works fine under 98se, but I can't > get screen drivers. > > Is there anyone out there who can give me tips on how to get this going? > > Cheers > Dex ZL2DEX > > > > - > To unsubscribe from this list: send the line "unsubscribe linux-hams" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- 73 de Xavi EB3CZS JN11bl