From mboxrd@z Thu Jan 1 00:00:00 1970 From: Aaron May Subject: soundmodem/ax25 newbie questions. Date: Sun, 30 Mar 2003 21:18:50 +1200 Sender: linux-hams-owner@vger.kernel.org Message-ID: <200303302118.50687.linux-hams@amayzing.co.nz> Reply-To: linux-hams@amayzing.co.nz Mime-Version: 1.0 Content-Transfer-Encoding: 8BIT Return-path: List-Id: Content-Type: text/plain; charset="us-ascii" To: Linux Hams I have just finished trying to install the soundmodem kernel drivers, only to find it doesn't like my sound card. The sound card is an on-board VIA chipset, and in the BIOS it has an option to enable the legacy sound-blaster on 0x220, irq5 dma 1, however when I try to ifconfig it up, the system log reports no sb at that location. So my sound card will not work? (further details at www.amayzing.co.nz/aaron/?page=045 if you are interested.) So I moved on to the soundmodem usermode (?) version. I have happily got it working to the point that text scrolls down the screen in kiss mode, proving that my cables work. When I try it in mkiss mode, it results in an error: sm[1187]: ioctl: TIOCSETD: Invalid argument (22). I'm unsure if it means anything, but the line written as I come out of soundmodemconfig says: "selection: cfg: - chan: -" I more suspect that ax25 needs some more configuration? I haven't found any doco/howto that makes sense to me about mkiss (I really am a newbie). Also If someone could point me at a simple packet terminal program? Any help would be appreciated. Cheers, Aaron ZL3UAR.