From mboxrd@z Thu Jan 1 00:00:00 1970 From: braddock@braddock.com Subject: Re: user soundmodem problems on Inspiron 8200 i810 chipset... Date: Tue, 9 Mar 2004 15:35:42 -0600 Sender: linux-hams-owner@vger.kernel.org Message-ID: <20040309213542.GA27566@braddock.com> References: <20040309022333.GA4377@braddock.com> <1078861838.2336.1.camel@law3lz8h11.lib.loc.gov> Mime-Version: 1.0 Return-path: Content-Disposition: inline In-Reply-To: <1078861838.2336.1.camel@law3lz8h11.lib.loc.gov> List-Id: Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Linux-Hams@vger.kernel.org Cc: Patrick Ouellette , t.sailer@alumni.ethz.ch On Tue, Mar 09, 2004 at 02:50:38PM -0500, Patrick Ouellette wrote: > Have you tried muting the microphone input? I had problems a few years I have tried muting it (as well as using the mic-in jack directly instead of the line-in jack). I did notice one anomaly that occurred frequently on the soundmodem diagnostic scope that I'm thinking might be signs of trouble. In the capture, the line traced on the scope would occasionally draw a straight horizontal line within the signal at random places (both horizontally and vertically). This "dead spot" seems to be uniformly about 4 1200 Hz cycles (~3 ms). This does not seem to be clipping because it occurs at random levels. Here is an excellent screen shot of the scope showing two instances of this anomaly in an otherwise pretty clean looking signal: http://braddock.com/soundmodem.png I'm wondering if this is a sampling problem with the ALSA i810 driver? If anyone could take a look at that scope image and let me know if that's normal behavior within the scope or a sound capture problem it would help us narrow this down. It occurs at all sound levels AFAIK. Also, I tried running soundmodem on a desktop system (vs my Inspiron laptop) that also has the Intel i810 sound chipset and ALSA drivers, with the exact same results. All help much appreciated! -Braddock Gaskill