From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ron Subject: Re: Trying to get Ax25 running. Date: Tue, 12 Oct 2004 19:40:40 -0700 (PDT) Sender: linux-hams-owner@vger.kernel.org Message-ID: <20041013024040.43747.qmail@web40829.mail.yahoo.com> Reply-To: ve1aic@yahoo.com Mime-Version: 1.0 Return-path: List-Id: Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Linux-Hams@vger.kernel.org Chuck we need some basic background info about your setup first. 1. What ax25 rpms have you installed? 2. What are your attach commands? 3. What are you trying to accomplish?..setup for LinFBB? FYI here is the first part of my startup script for ax25 call fbb_start in /etc/ax25 along with other ax25 files: /usr/sbin/kissattach /dev/ttyS0 vhf xxx.xxx.xxx.xxx Where xxx=my ip address, with MFJ tnc in kiss mode on com1. See also com port speed in axports. Check your ax25 device with 'ifconfig' and you should see ax0. Be sure to read ax25-how-to at: http://www.tldp.org/HOWTO/AX25-HOWTO/ 73, Ron Chuck Hast wrote: > Folks, > I am a bit new to this. I am running SuSE 9.1 I have installed the AX25 > stuff, and when I set up the port I have a KISS TNC on I see the commands > being sent to it. > When I run call, and it appears that the connection is established the whole > thing locks up. Not just that screen, but X, Keyboard and all. At that point > I end up hitting the power button in order to get out of it. __________________________________ Do you Yahoo!? Read only the mail you want - Yahoo! Mail SpamGuard. http://promotions.yahoo.com/new_mail