From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hamish Moffatt Subject: Re: aprsd setup Date: Sun, 7 Nov 2004 12:44:58 +1100 Message-ID: <20041107014458.GA3069@cloud.net.au> References: <001301c4c469$d56f7c40$6402a8c0@laptop> Mime-Version: 1.0 Return-path: Content-Disposition: inline In-Reply-To: <001301c4c469$d56f7c40$6402a8c0@laptop> Sender: linux-hams-owner@vger.kernel.org List-Id: Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-hams@vger.kernel.org On Sun, Nov 07, 2004 at 02:33:49AM +0100, Thomas - OZ2AFO wrote: > I'm trying to setup an aprs station, supporting both digipeating and > i-gate. So far I have found that there is two packages : aprsdigi, and > aprsd. Each does one of the wanted things, but not the other. Am I correct? > > How would one do the right setup of both aprsdigi AND aprsd on the same PC? > (If that's needed to do both my jobs) You can run both just fine. Just run them. This requires that you are using the linux kernel's AX.25 with an appropriate device such as a TNC in KISS mode etc. (aprsdigi always requires that, while aprsd can use kernel AX.25 or drive the TNC (NOT in KISS mode) directly.) > I sort of having aprsd up and running already, but it just sits there. It > is connected to the network (have connection to second.aprs.net, and > another local i-gate here in Denmark). And I can see in history.txt that it > recieves things. But if I try to use a program like ui-view to connect to > the server I don't get a thing, other than the position of the server > itself. What am I doing vrong? Are you connecting to it on the right port? Does the web status page say anything interesting? You can access it at http://[your server]:14501/ Hamish -- Hamish Moffatt VK3SB