From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hamish Moffatt Subject: Re: aprsd setup Date: Sun, 7 Nov 2004 21:20:25 +1100 Message-ID: <20041107102025.GA5684@cloud.net.au> References: <001301c4c469$d56f7c40$6402a8c0@laptop> <20041107014458.GA3069@cloud.net.au> <001601c4c4b2$36c995a0$6402a8c0@laptop> Mime-Version: 1.0 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Content-Disposition: inline In-Reply-To: <001601c4c4b2$36c995a0$6402a8c0@laptop> Sender: linux-hams-owner@vger.kernel.org List-Id: Content-Type: text/plain; charset="iso-8859-1" To: linux-hams@vger.kernel.org On Sun, Nov 07, 2004 at 11:11:57AM +0100, Thomas M=F8rch wrote: > Hamish Moffatt wrote: > >On Sun, Nov 07, 2004 at 02:33:49AM +0100, Thomas - OZ2AFO wrote: > >>How would one do the right setup of both aprsdigi AND aprsd on the > >>same PC? (If that's needed to do both my jobs) > > > >You can run both just fine. Just run them. This requires that you ar= e > >using the linux kernel's AX.25 with an appropriate device such as a > >TNC in KISS mode etc. (aprsdigi always requires that, while aprsd ca= n > >use kernel AX.25 or drive the TNC (NOT in KISS mode) directly.) >=20 > Kernel ax25 is already running, and with aprsd! What confuses me, is = that > apparently both aprsd and aprsdigi uses the port "default" call (the= one > from axports), as their source call. I can not specify different call= s (or=20 > ssid's) > for the different programs. As I understand two programs can not use > the same ssid / call? Or can they? They can't for connected traffic (as I understand), but it's no problem for unconnected/UI traffic. I don't believe you can specify different calls at all... though my memory is fading a bit in this area! > I connect to my own server on port 1313 with uiview. My own server is > connected to seccond.aprs.net on port 23, and to oz3acc.dyndns.org on > port 1313. >=20 > If I view the http status, it says that all is connected, even my uiv= iew. Does it show any packets counted? > Should I use another port for "user" connections with ui-view? (It's = a bit > confusing with 10 different ports that does allmost the same, but wit= h a=20 > little > bit of difference for each of them, specialy when you are new to aprs= ) I would suggest 14579 perhaps, 1313 is the link port used to connected aprsd IGATEs together only (if memory serves). Hamish --=20 Hamish Moffatt VK3SB - To unsubscribe from this list: send the line "unsubscribe linux-hams" i= n the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html