From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mike Markowski Subject: Re: QSSTV-5.2d compiling Date: Tue, 16 Nov 2004 14:42:37 -0500 Message-ID: <20041116194237.GA20427@strauss.udel.edu> References: <41984799.9020305@bigpond.com> <1030.65.166.80.196.1100566712.squirrel@w9ya0.pointclark.net> Mime-Version: 1.0 Return-path: Content-Disposition: inline In-Reply-To: <1030.65.166.80.196.1100566712.squirrel@w9ya0.pointclark.net> Sender: linux-hams-owner@vger.kernel.org List-Id: Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-hams@vger.kernel.org Thanks, David, you were a great help. I had just downloaded qsstv when your note came through. To summarize for others, using David's info to get qsstv running: - Go to http://eu.hurd.gnuab.org/pub/debian/pool/main/q/qsstv/ - Download qsstv_5.2d.orig.tar.gz and qsstv_5.2d-8+cfg.diff.gz - After untarring/gzipping, patch -p 0 < qsstv_5.2d-8+cfg.diff - touch qsstv/configform.ui qsstv/ftpform.ui qsstvrecform.ui \ qsstv/zoomform.ui qsstv/freqform.ui qsstv/posform.ui \ qsstv/textselect.ui - And you're all set to configure, make, & install. 73, Mike AB3AP > Hi All...have had great problems with compiling QSSTV-5.2d on Fedora > Core 2 and Mandrake 9.2 or 10......I found it wouldnt compile at > "sstvparam.ccp"...found the alternate copy of this on the net and > overwrote the origional.....that compiled ok.....the next problem was > with 'zoomform.cpp'....chased all over the net and finally found a > qsstv-5.2d.diff.gz file used in Debian for QSSTV.......noted that there > was mention of using 'touch' on the 'zoomform.ui' file .....patched the > origional qsstv-5.2d.tar.gz after untaring.....still no joy......then > went and had a look in the '/debian/rules' file and saw the lines under > build.....used the following command in the qsstv-5.2d dir after > untaring it..... > touch qsstv/configform.ui qsstv/ftpform.ui qsstvrecform.ui > qsstv/zoomform.ui qsstv/freqform.ui qsstv/posform.ui qsstv/textselect.ui > then ./configure && make no more error problems...su then make > install.... great now i have QSSTV up and running..... > > Hope this helps anyone who has had problems......the touch command could > be written into the configure system somewhere but i dont know how to > do it.... > > best 73's > David Munn > VK4BDJ