From mboxrd@z Thu Jan 1 00:00:00 1970 From: David Quental Subject: Re: Problems in my ax25 interface. Date: Wed, 15 Jun 2005 23:01:34 +0100 Message-ID: <200506152301.34300.ct1drb@iol.pt> References: <200506112158.32378.ct1drb@iol.pt> <200506121205.18849.w.knol@niwa.co.nz> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <200506121205.18849.w.knol@niwa.co.nz> Content-Disposition: inline Sender: linux-hams-owner@vger.kernel.org List-Id: Content-Type: text/plain; charset="us-ascii" To: Linux-hams List Hello all here still I have problems with my ax25 interface and internet, I configured my computer to boot without ax25 on, all runs fine (except ax25 of course) but when I do rcax25 start there are a lot of frames that are sending via scc0 (1200 interface). > Hi David, > > > All runs fine, but, lately I added the samba service. Now in my listen > > (where I can see traffic) I saw a lot of ip frames sending to the 1k2 > > device > > You need to stop SAMBA from using the packet network interfaces. > > Edit /etc/smb.conf and set > > bind interface only = Y > interfaces = eth0, 127.0.0.1 > > ...assuming eth0 is your LAN interface. My lan interface is wlan0, I have a wireless lan > Now restart (as root) smb and nmb with: > > rcsmb restart > rcnmb restart It does not work, I see this: len 58 dbcontrol-oms->netbios-ns Data 50 inside tcpip frame. Maybe this helps. > Hope this helps... > > Wilbert, ZL2BSJ Best 73s. CT1DRB David Quental